Characterization of Dip-Coated Boron Nitride on Silicon Carbide Fibers

Amorphous boron nitride thin coatings (∼0.2 μm) have been formed on Nicalon and C-Nicaion (pre-carbon-coated Nicalon) yarns via dip coating in boric acid solution followed by heating and nitriding in NH₃gas at 1000°C. X-ray photoelectron spectroscopy (XPS) and Auger electron spec-troscopy (AES) studies have shown the formation of boron nitride. The coating was boron rich and contains oxygen. The N/B and O/B ratios range from 0.6 to 0.8 and from 0.1 to 0.25, respectively. Tensile strength measurements revealed that the BN-coated C-Nicalon yarn maintained ∼85% of its original strength while BN-coated Nicalon lost ∼85% of its original strength. Auger depth profiles showed that there was a consumption of carbon during the heating and nitridation process for both BN-coated Nicalon and C-Nicalon fibers. However, the depletion of carbon in BN-coated Nicalon fibers was much more severe than that in BN-coated C-Nicalon fibers.     

Qualitative and Quantitative Molecular Testing Methodologies and Traceability Systems for Commercialised Bt Cotton Events and Other Bt Crops Under Field Trials in India

Qualitative and quantitative PCR assays were developed for detection of commercialised Bt cotton events, i.e. MON531, MON15985 and other Bt crops, which are under different stages of field trials in India, i.e. Bt brinjal, Bt rice, Bt cauliflower, Bt potato and Bt okra. Multiplex PCR assays simultaneously detecting specific cry1Ac, cry1Ab, cry2Ab genes, Cauliflower Mosaic Virus 35S promoter, nptII marker gene along with species- or taxon-specific endogenous gene in these Bt crops have been developed. The quantitative real-time PCR assays were also reported for cry1Ac gene using designed primers and TaqMan probe. The sensitivity of developed assays for detection of specific transgene was established up to 0.01%. The analytical methods developed in the present report will be of immense use for qualitative screening and detection of Bt crops along with the quantitative analysis of inserted cry1Ac gene to meet the threshold level for regulatory compliance.     

Health and wellness monitoring through wearable and ambient sensors: exemplars from home-based care of elderly with mild dementia

Monitoring and timely intervention are extremely important in the continuous management of health and wellness among all segments of the population, but particularly among those with mild dementia. In relation to this, we prescribe three design principles for the construction of services and applications. These are ambient intelligence, service continuity, and micro-context. In this paper, we provide three exemplars from our research and development activities that illustrate the use of these design principles in the construction of services and applications. All the applications are drawn from the field of care for mild dementia patients in their living quarters.     

Synthesis and Characterization of Silver Nanoparticles and Silver Inks: Review on the Past and Recent Technology Roadmaps

The synthesis of silver nanoparticles for silver ink formation has attracted broad interest in the electronic part printing and semiconductor chip industry due to the extraordinary electrical and mechanical properties of these materials. The preparation of silver nanoparticles through a physical or chemical reduction process is the most common methodology applied to obtain nanoparticles with the required size, shape and surface morphology. The chemical solution or solvent carrier applied for silver ink formulation must be applied simultaneously with the direct writing technique to produce the desired adherence, viscosity, and reliable performance. This review paper discusses the details concerning the past and recent advancement of the synthesis and characterization of silver nanoparticles and silver ink formation. A review on the advantages of various sintering techniques, which aim to achieve the electrical and mechanical properties of the required printed structure, is also included. A brief summary concerning the recent challenges and improvement approaches is presented at the end of this review.     

Fabrication of Embedded Microstructures Via Lamination of Thick Gel‐Casted Ceramic Layers

This article describes a new approach to fabricate various embedded ceramic microstructures. Design geometries of the microstructures are replicated onto a soft reusable polydimethylsiloxane (PDMS) mold. Rapid consolidation of ceramic suspension on the molds using gel‐casting technique produces structured ceramic layers. 85% aqueous glycerol solution has been identified as suitable adhesive agent to laminate the ceramic layers. Capability of the approach in fabricating embedded microstructures of 3‐dimensional and aspect ratio as high as 20 and 50 has been demonstrated. Ceramic microthruster and Y‐shaped microfluidic reactor are fabricated using this new approach to show its potential to construct various ceramic microdevices.     

Performance Analysis of Microwave Radio Refractivity on Radio Field Strength and Radio Horizon Distance Over Akure,Nigeria

Surface radio refractivity studies are being carried out in Akure, \((7.15^{\circ }\hbox {N}, 5.12^{\circ }\hbox {E})\) South-Western Nigeria, by in-situ measurement of atmospheric pressure, temperature, and relative humidity using Wireless Weather Station (Integrated Sensor Suit, ISS). Five years of measurement (January, 2007–December, 2011) were used to compute the surface radio refractivity and its diurnal, daily, seasonal and yearly variations are analyzed. The results were then used to compute radio horizon distance \((\hbox {R}_\mathrm{DH})\) and examine the field strength (FSV) variability. Results obtained show that the surface radio refractivity, \(\hbox {N}_\mathrm{s}\) , varies with the time of the day as well as the seasons of the year. High values of \(\hbox {N}_\mathrm{s}\) were recorded in the morning and evening hours while the values were minima around 1,500 h local time. An average value of surface radio refractivity of 364.74 N-units was obtained for this location. The annual maximum mean of FSV is 15.24 dB and the minimum is 2.20 dB. This implies that the output of a receiving antenna in Akure may generally be subject to variations not less than 2 dB in a year, but can be as high as 15 dB.     

Analytical modeling of subthreshold current and subthreshold swing of Gaussiandoped strained-Si-on-insulator MOSFETs

This paper presents the analytical modeling of subthreshold current and subthreshold swing of short- channel fully-depleted （FD） strained-Si-on-insulator （SSOI） MOSFETs having vertical Gaussian-like doping pro- file in the channel. The subthreshold current and subthreshold swing have been derived using the parabolic approx- imation method. In addition to the effect of strain on silicon layer, various other device parameters such as channel length （L）, gate-oxide thickness （tox）, strained-Si channel thickness （ts_Si）, peak doping concentration （Np）, project range （Rp） and straggle （op） of the Gaussian profile have been considered while predicting the device characteris- tics. The present work may help to overcome the degradation in subthreshold characteristics with strain engineering. These subthreshold current and swing models provide valuable information for strained-Si MOSFET design. Ac- curacy of the proposed models is verified using the commercially available ATLASTM, a two-dimensional （2D） device simulator from SILVACO.     

Reflection of plane waves at the free surface of a fibre-reinforced elastic half-space

The propagation of plane waves in fibre-reinforced, anisotropic, elastic media is discussed. The expressions for the phase velocity of quasi-P (qP) and quasi-SV (qSV) waves propagating in a plane containing the reinforcement direction are obtained as functions of the angle between the propagation and reinforcement directions. Closed form expressions for the amplitude ratios for qP and qSV waves reflected at the free surface of a fibre-reinforced, anisotropic, homogeneous, elastic half-space are obtained. These expressions are used to study the variation of amplitude ratios with angle of incidence. It is found that reinforcement has a significant effect on the amplitude ratios and critical angle     

Dopant Migration-Induced Interface Dipole Effect in n-Doped GaAs/AlGaAs Terahertz Detectors

A heterojunction interfacial workfunction internal photoemission (HEIWIP) terahertz detector with ~1times10¹⁸cm^-3 n-type doped GaAs emitters in a multilayer GaAs/Al_0.13Ga_0.87 As heterostructure is presented. The detection mechanism is based on free carrier absorption with a broad response extending to ~ 5.26 THz (57 mum), corresponding to an effective workfunction of ~ 21.8 meV, which is much smaller than the offset expected for an Al fraction of x = 0.13 at a 1times10¹⁸ cm^-3 doping. This is attributed to a reduction of the conduction band offset by interface dipole formation between the accumulated negative charges at the interface states and migrated positively charged donors in the barrier. The device has a peak responsivity of 0.32 A/W at ~ 26 mum at 5 K. It is demonstrated that the dopant migration-induced interface dipole effect can be used to extend the zero response threshold frequency (f ₀) of n-type HEIWIP detectors.