Beam test of the CsI(Tl) calorimeter for the BELLE detector at the KEK-B factory

We studied the performance of a prototype electromagnetic calorimeter for the BELLE detector at the KEK proton synchrotron for an energy range of 0.25–3.5 GeV. The prototype consisted of an array of 6 × 5 CsI(Tl) crystals with 30 cm length (16.2 radiation lengths) and about 6 cm × 6 cm cross section. The scintillation light of each CsI(Tl) crystal was read out by two large-area PIN photodiodes and charge-sensitive preamplifiers attached at the rear face of the crystal. We measured the energy and position resolution for electrons and the e/π separation for two sets of matrix configurations: one corresponded to the center and the other to the edge of the barrel calorimeter. The overall performance measured by the test proves that the prototype calorimeter is satisfactory for the use in the BELLE detector.     

Mesa-isolated GaAs Schottky-barrier photodiodes

The design, fabrication and characterisation of GaAs Schottky-barrier photodiodes with evaporated, free-standing-metal airbridges is reported. The photodiodes were fabricated using all dry-etching techniques. Anisotropic chemically assisted ion beam etching was used to etch vertical sidewall mesas, and isotropic reactive ion etching was used to etch a lateral tunnel. A free-standing-metal airbridge created by the lateral tunnel etch results in isolation of the active area at the same time providing free-standing-metal interconnection to the contact pad.<>     

Cross-specialty linkage and extrapolation of resource-based relative value scales

We used the fluorescent labelled dopamine D1-receptor antagonist Bodipy-SCH 23390 for the cellular localization of D1-ligand binding sites in the retinae of different vertebrates (teleosts, Xenopus, turtle, rat and rabbit). Competition experiments with unfixed cryosections of fish retina were performed to characterize the binding conditions of Bodipy-labelled SCH 23390. Tissue bound [3H]SCH 23390 was displaceable with increased amounts of bodipy-SCH 23390. The pharmacological specificity of the D1 fluorescent antagonist was determined by competition experiments with an excess of unlabelled SCH 23390. This treatment significantly reduced the level of fluorescence of the retina confirming the specificity of the binding. We observed a homogeneously distributed fluorescence signal in both plexiform layers in unfixed cryosections of fish, frog, turtle, rat and rabbit. Similar staining intensities of both plexiform layers were found in frog, turtle, rat and rabbit retina. In teleosts, the label of the outer plexiform layer was markedly more intense. Non-specific label was associated with photoreceptor outer and inner segments. The specific labelling of both plexiform layers indicates a mismatch of dopamine releasing and D1-binding sites, and suggests a possible extrasynaptic localization of the D1-receptor. The physiological significance of the observed distribution of D1-ligand binding sites is discussed with respect to the role of dopamine in controlling adaptational processes in the retina.     

Deciphering the Binding Interactions between Acinetobacter baumannii ACP and β-ketoacyl ACP Synthase III to Improve Antibiotic Targeting Using NMR Spectroscopy

Fatty acid synthesis is essential for bacterial viability. Thus, fatty acid synthases (FASs) represent effective targets for antibiotics. Nevertheless, multidrug-resistant bacteria, including the human opportunistic bacteria, Acinetobacter baumannii, are emerging threats. Meanwhile, the FAS pathway of A. baumannii is relatively unexplored. Considering that acyl carrier protein (ACP) has an important role in the delivery of fatty acyl intermediates to other FAS enzymes, we elucidated the solution structure of A. baumannii ACP (AbACP) and, using NMR spectroscopy, investigated its interactions with β-ketoacyl ACP synthase III (AbKAS III), which initiates fatty acid elongation. The results show that AbACP comprises four helices, while Ca²⁺ reduces the electrostatic repulsion between acid residues, and the unconserved F47 plays a key role in thermal stability. Moreover, AbACP exhibits flexibility near the hydrophobic cavity entrance from D59 to T65, as well as in the α₁α₂ loop region. Further, F29 and A69 participate in slow exchanges, which may be related to shuttling of the growing acyl chain. Additionally, electrostatic interactions occur between the α₂ and α₃-helix of ACP and AbKAS III, while the hydrophobic interactions through the ACP α₂-helix are seemingly important. Our study provides insights for development of potent antibiotics capable of inhibiting A. baumannii FAS protein–protein interactions.     

Activation of Nrf2/HO-1 by Peptide YD1 Attenuates Inflammatory Symptoms through Suppression of TLR4/MYyD88/NF-κB Signaling Cascade

In this study, we investigate the immunomodulatory effects of a novel antimicrobial peptide, YD1, isolated from Kimchi, in both in vitro and in vivo models. We establish that YD1 exerts its anti-inflammatory effects via up-regulation of the Nrf2 pathway, resulting in the production of HO-1, which suppresses activation of the NF-κB pathway, including the subsequent proinflammatory cytokines IL-1β, IL-6, and TNF-α. We also found that YD1 robustly suppresses nitric oxide (NO) and prostaglandin E2 (PGE₂) production by down-regulating the expression of the upstream genes, iNOS and COX-2, acting as a strong antioxidant. Collectively, YD1 exhibits vigorous anti-inflammatory and antioxidant activity, presenting it as an interesting potential therapeutic agent.     

Object-aware image thumbnailing using image classification and enhanced detection of ROI

Thumbnail images are used to display a large collection of photos in various digital devices. It aims for people to browse and search the image collection effectively. The provided thumbnail images are expressed in a much lower resolution compared to the resolution of the original image. Thus, it faces a significant problem of how to represent the content of a given image effectively in a tiny thumbnail image. Many image thumbnailing methods have been presented in literature for this purpose. However, the existing thumbnailing methods are designed to use a single method to all kinds of images, regardless of image contents. On the other hand, the proposed method employs two different thumbnail generation methods either of which is applied according to corresponding image context. To achieve this, we first classify images into two groups by detecting the object existence. Then, an ROI cropping method using a saliency map is presented for images with objects, in order to represent the important region of images in the thumbnail. Images without any interesting objects, such as landscape images, are considered to be resized by using a simple scaling method to maintain the whole image context. Experimental results show that the proposed method yields comparable performance on a variety of datasets.     

Exploring the Relationship Between Green Consumption Value,Satisfaction, and Loyalty to Hybrid Car in Elderly Consumers

The study aimed to examine the relationship between green consumption value, satisfaction, and loyalty of driving hybrid cars among elderly consumers. Data were collected from a cross‐sectional survey of 314 elderly consumers who purchased hybrid cars in the United States. A partial least squares analysis revealed that elderly consumers’ social, price, and quality values positively influenced the satisfaction of their hybrid car experience, and their satisfaction significantly influenced their loyalty of hybrid car. The relationship between green consumption value, satisfaction, and loyalty toward driving hybrid cars among elderly consumers revealed insight into their value orientations toward the hybrid car. Special efforts are suggested in promoting hybrid car use to elderly consumer groups. Marketers should pay attention to changing beliefs and increasing perceived values of driving a hybrid car for consumers to encourage them to use green products.     

Cognitive evaluation for conceptual design: cognitive role of a 3D sculpture tool in the design thinking process

ABSTRACT

This study focuses on the decisive role played by the digital design environment in the cognitive design process and design thinking. To analyse the cognitive role of digital design tools, we carried out a protocol analysis of conventional design sketching and a 3D sculpture tool. Cognitive evaluation was a differentiating factor when considering the contextual role of the 3D sculpture tool in subsequent evaluations, non-sequential evaluations for conversion, and passive approaches within the design process. Cognitive evaluation played the following roles: validation, extension, navigation, exploration, and confirmation. The navigation, exploration, and extension roles played by non-sequential evaluation were mainly related to inductive design thinking. Finally, the types of cognitive evaluation and their roles when using the 3D sculpture tool were different, according to the design thinking type. This study explored the multidimensional roles of cognitive evaluation using a 3D sculpture tool and its relationship with design thinking types.     

Least squares decoding in binomial frequency division multiplexing

This paper proposes a method that can reduce the complexity of a system matrix by analyzing the characteristics of a pseudoinverse matrix to receive a binomial frequency division multiplexing (BFDM) signal and decode it using the least squares (LS) method. The system matrix of BFDM can be expressed as a band matrix, and as this matrix contains many zeros, its amount of calculation when generating a transmission signal is quite small. The LS solution can be obtained by multiplying the received signal by the pseudoinverse matrix of the system matrix. The singular value decomposition of the system matrix indicates that the pseudoinverse matrix is a band matrix. The signal-to-interference ratio is obtained from their eigenvalues. Meanwhile, entries that do not contribute to signal generation are erased to enhance calculation efficiency. We decode the received signal using the pseudoinverse matrix and the removed pseudoinverse matrix to obtain the bit error rate performance and to analyze the difference.