Estimating the viewing parameters of random, noisy projections ofasymmetric objects for tomographic reconstruction

The ability to determine the viewing parameters of objects from their projections has enabled well established tomographic techniques to be employed in the 3D reconstruction of objects from images obtained via modalities where the orientation of the objects cannot be controlled. A method is described for the determination of the viewing parameters of randomly acquired projections of asymmetric objects. It extends upon the common lines algorithm by determining the relative orientation of projections from the location of lines of intersection among the Fourier transforms of the projections in 3D Fourier space. A new technique for finding the lines of intersection in the presence of translational displacement, and for subsequently finding the translational displacement, is presented. The complete algorithm is described and its efficacy is demonstrated using real data. A new technique for dealing with noise is also discussed     

3D velocity from 3D Doppler radial velocity

We present local least squares and regularization frameworks for computing 3D velocity (3D optical flow) from 3D radial velocity measured by a Doppler radar. We demonstrate the performance of our algorithms quantitatively on synthetic radial velocity data and qualitatively on real radial velocity data, obtained from the Doppler radar at Kurnell Radar station, Botany Bay, New South Wales, Australia. Radial velocity can be used to predict the future positions of storms in sequences of Doppler radar datasets.© 2005 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 15, 189–198, 2005     

Optimizing Router Performance in TCP/IP Networks

This article reviews the steps necessary to configure and implement a complex router internetwork. This article will specifically concentrate on Cisco routers, and since they support Transmission Control Protocol/Internet Protocol (TCP/IP) natively, it will concentrate on a backbone network employing that protocol.     

Laboratory simulated slipstream testing of novel sulfur removal processes for gasification application

The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project is investigating an Early Entrance Coproduction Plant (EECP) concept to evaluate integrated electrical power generation and methanol production from coal and other carbonaceous feedstocks. Research, development and testing (RD&T) that is currently being conducted under the project is evaluating cost effective process systems for removing contaminants, particularly sulfur species, from the generated gas which contains mainly synthesis gas (syngas), CO₂ and steam at concentrations acceptable for the methanol synthesis catalyst. The RD&T includes laboratory testing followed by bench-scale and field testing at the SG Solutions Gasification Plant located in West Terre Haute, Indiana. Actual synthesis gas produced by the plant was utilized at system pressure and temperature for bench-scale field testing.     

Heating energy use management in residential buildings by temperature control

This paper presents the results of analytical investigations to determine the potential heating energy savings that can be achieved in residential buildings by controlling the house temperature through either night setback or night setback plus day zone setback. A typical U.S. single family house is analyzed for different levels of thermal integrity of the building envelope (i.e., levels of insulation, window glazing, and infiltration). Reduced infiltration, insulated interior walls, and various window orientations are also considered. Results are given for four major U.S. climate zones—cool, temperate, hot-humid, and hot-arid. The analysis shows that both types of setbacks are most effective in loose houses, with the greatest absolute savings for the cool climates, and the greatest percent savings for the hot climates. However, the benefits from thermostat setbacks are smaller for tighter houses, and may actually be counterproductive owing to corollary effects such as increased peak loads and degradation of system efficiency.     

Spatially resolved X-ray diffraction phase mapping and α → β → α transformation kinetics in the heat-affected zone of commercially pure titanium arc welds

Spatially resolved X-ray diffraction (SRXRD) is used to map the α → β → α phase transformation in the heat-affected zone (HAZ) of commercially pure titanium gas tungsten arc welds. In situ SRXRD experiments were conducted using a 180-μm-diameter X-ray beam at the Stanford Synchrotron Radiation Laboratory (SSRL) (Stanford, CA) to probe the phases present in the HAZ of a 1.9 kW weld moving at 1.1 mm/s. Results of sequential linear X-ray diffraction scans made perpendicular to the weld direction were combined to construct a phase transformation map around the liquid weld pool. This map identifies six HAZ microstructural regions between the liquid weld pool and the base metal: (1) α-Ti that is undergoing annealing and recrystallization; (2) completely recrystallized α-Ti; (3) partially transformed α-Ti, where α-Ti and β-Ti coexist; (4) single-phase β-Ti; (5) back-transformed α-Ti; and (6) recrystallized α-Ti plus back-transformed α-Ti. Although the microstructure consisted predominantly of α-Ti, both prior to and after the weld, the crystallographically textured starting material was altered during welding to produce different α-Ti textures within the resulting HAZ. Based on the travel speed of the weld, the α → β transformation was measured to take 1.83 seconds during heating, while the β → α transformation was measured to take 0.91 seconds during cooling. The α → β transformation was characterized to be dominated by long-range diffusional growth on the leading (heating) side of the weld, while the β → α transformation was characterized to be predominantly massive on the trailing (cooling) side of the weld, with a massive growth rate on the order of 100 μm/s.