Estimating signal strengths in the design of an indoor wireless network

One issue in the design and implementation of a wireless local area network is the selection of access point (AP) locations. Proper AP placement is necessary to provide adequate signal coverage and also to minimize cochannel coverage overlap. The impact of incorrect placement of APs is significant. Placing APs too far apart can lead to gaps in coverage. On the other hand, placing the units too close together leads to excessive cochannel coverage overlap, degrading system performance. Currently, AP placement involves a "trial and error" technique. When a technician tests the effect of moving an AP from one location to another, it is necessary to spend considerable time manually measuring signal strengths in order to determine how this move affects the AP's coverage area. In this letter, we describe a procedure for estimating the coverage areas of relocated APs. The procedure can be used as part of a manual design process or as part of an automated design tool.     

Multibody simulation tool for the calculation of lashing loads on RoRo ships

Approximately 80% of the international transport of goods is carried on by means of ships. A large portion of the transport capacity is represented by Roll-on-Roll-off (RoRo) ships. Especially in Europe this is a relevant potential for the RoRo segment. Consequently, the design and construction of RoRo ships plays an increasing role for German shipyards and their suppliers. In order to make the loading and unloading procedure of trailer economically more competitive, ship owners would like to improve the lashing of trailers on the ship. On the basis of a multibody system formalism, a software tool has been developed which allows for an optimization of the loading of trailers on RoRo ships. Commemorative Contribution.     

Coefficient of friction and subjective assessment of slippery work surfaces.

Research was conducted to determine how well subjects could distinguish between surfaces with different coefficient of friction (COF) values and to evaluate how well subjective ratings of slipperiness correlated with the actual COF values. Thirty-three ironworkers experienced in working and walking on steel surfaces and 23 university students inexperienced with these tasks participated in the study. Subjective slipperiness ratings for a variety of climbing and walking conditions were obtained from the subjects. It was found that subjects could identify differences in the slipperiness of four types of steel coatings tested in the study. There was a high correlation between the subjective ratings and the measured COF values. Subjects did not slip at a COF of 0.41 but did lose footing at a COF of 0.20.     

The next-generation business meeting: from i-lands to flexible meeting landscapes

Meetings are an important form of interaction in business settings. However, meetings are often not held in a way that makes all participants feel engaged. Meeting support systems try to overcome this obstacle by helping meeting participants in the meeting workflow. This paper takes a complementary approach by distinguishing between different perspectives of good meetings: the peopleware perspective, the generic groupware perspective, and the roomware perspective. It is argued that all these perspectives have to be considered simultaneously when heading toward an ideal meeting system design. The paper presents excerpts of a pattern language that empowers users to improve their meeting. Besides this, the pattern language can be considered as a tool for the designer. After showing, how both groups made use of the patterns, the paper finally presents LivingAgendas, a meeting support system that can accompany the meeting participant through the meeting life cycle.     

List-based Data Structures for Efficient Management of Advance Reservations

Complex eScience and other sophisticated applications in the field of HPC imply new demands that queuing based resource management systems cannot meet. To guarantee Quality of Service and co-allocation in the Grid, planning based resource management systems implementing advance reservation are needed. These systems face new challenges as a planning based management system has to keep track of the jobs and reservations in the future. Additionally, during the negotiation process of incoming reservations, a good overview of the remaining, not-yet reserved capacity is needed—not only for the current allocation, but also for the whole book-ahead time. Therefore, the resource management problem becomes a two dimensional problem for advance reservations in this field. In this paper different data structures are investigated and discussed in order to fit to planning based resource management. As a result the benefits of using lists of resource allocation or free blocks are exposed. This general idea widely used to manage continuous resources is extended to cover not only the resource dimension but also the time dimension. The list of blocks approach is evaluated in a Grid level and a local resource management system for a computing cluster. The extensive simulations showed a better runtime and higher reservation success rate compared with the currently favored approach of a slotted time and the more sophisticated approach based on AVL trees.     

Smallholders’ Soil Fertility Management in the Central Highlands of Ethiopia: Implications for Nutrient Stocks, Balances and Sustainability of Agroecosystems

Low agricultural productivity caused by soil degradation is a serious problem in the Ethiopian Highlands. Here, we report how differences in soil fertility management between farming systems, based either on enset (Ensete ventricosum) or on teff (Eragrostis tef) as the major crops, affect the extent of nutrient stocks, balances and ecosystem sustainability. We collected information on farmers’ resources and nutrient management practices from stratified randomly selected households in two watersheds in the Central Highlands of Ethiopia. In addition, we collected soil samples from each land use and calculated nutrient stocks, partial and full nutrient balances (N, P and K) for one cropping season. Our results show that farmers in the two farming systems manage their soils differently and that nutrient inputs were positively related to farmers’ wealth status. The watershed with the enset-based system had higher soil N and K stocks than the watershed with the teff-based system, while P stocks were not different. Management related N?and K fluxes were more negative in the teff-based system (?28 kg N ha^?1 yr^?1 and ?34 kg K ha^?1 yr^?1) than in the enset-based system (?6 kg N ha^?1 yr^?1 and ?14 kg K ha^?1 yr^?1) while P fluxes were almost neutral or slightly positive. Within the enset-based system, a strong redistribution of N, P and K took place from the meadows and cereals (negative balance) to enset (positive balances). Although in the teff-based system, N, P and K were redistributed from meadows, small cereals and pulses to maize, the latter still showed a negative nutrient balance. In contrast to nutrient balances at land use level, nutrient balances at the watershed scale masked contrasting areas within the system where nutrient oversupply and deficiencies occurred.     

Zur Selbstdiffusion von Benzol und Azeton in Polymethylmethacrylat

The selfdiffusion coefficients of acetone and benzene are studied in the systems acetone/poly(methylmethacrylate) and benzene/poly(methylmethacrylate) by means of the spin echo technique as function of concentration and temperature. From the dependence of temperature, the activation energies are calculated as function of concentration. The dependence of concentration of the selfdiffusion coefficients is discussed using the theory of Free Volume according to FUJITA. The Free Volume of the poly(methylmethacrylate) is calculated as function of temperature.     

Light metal compound casting

‘Compound casting’simplifies joining processes by directly casting a metallic melt onto a solid metal substrate. A continuously metallurgic transition is very important for industrial applications, such as joint structures of spaceframe constructions in transport industry. In this project, ‘compound casting’ of light metals is investigated, aiming at weight-saving. The substrate used is a wrought aluminium alloy of type AA5xxx, containing magnesium as main alloying element. The melts are aluminium alloys, containing various alloying elements (Cu, Si, Zn), and magnesium. By replacing the natural oxygen layer with a zinc layer, the inherent wetting difficulties were avoided, and compounds with flawless interfaces were successfully produced (no contraction defects, cracks or oxides). Electron microscopy and EDX investigations as well as optical micrographs of the interfacial areas revealed their continu- ously metallic constitution. Diffusion of alloying elements leads to heat-treatable microstructures in the vicinity of the joining interfaces in Al-Al couples. This permits significant variability of mechanical properties. Without significantly cutting down on wettability, the formation of low-melting intermetallic phases (Al3Mg2 and Al12Mg17 IMPs) at the interface of Al-Mg couples was avoided by applying a protective coating to the substrate.     

The Price of Anarchy in Network Creation Games Is (Mostly) Constant

We study the price of anarchy and the structure of equilibria in network creation games. A network creation game is played by n players {1,2,…,n}, each identified with a vertex of a graph (network), where the strategy of player i, i=1,…,n, is to build some edges adjacent to i. The cost of building an edge is α>0, a fixed parameter of the game. The goal of every player is to minimize its creation cost plus its usage cost. The creation cost of player i is α times the number of built edges. In the SumGame variant, the usage cost of player i is the sum of distances from i to every node of the resulting graph. In the MaxGame variant, the usage cost is the eccentricity of i in the resulting graph of the game. In this paper we improve previously known bounds on the price of anarchy of the game (of both variants) for various ranges of α, and give new insights into the structure of equilibria for various values of α. The two main results of the paper show that for α>273?n all equilibria in SumGame are trees and thus the price of anarchy is constant, and that for α>129 all equilibria in MaxGame are trees and the price of anarchy is constant. For SumGame this answers (almost completely) one of the fundamental open problems in the field—is price of anarchy of the network creation game constant for all values of α?—in an affirmative way, up to a tiny range of α.