Prediction of Flooding in Packed Liquid-Liquid and High-Pressure Extraction Columns Using a Gaussian Process

Reliable prediction of flooding conditions is needed for sizing and operating packed extraction columns. Due to the complex interplay of physicochemical properties, operational parameters and the packing-specific properties, it is challenging to develop accurate semi-empirical or rigorous models with a high validity range. State of the art models may therefore fail to predict flooding accurately. To overcome this problem, a data-driven model based on Gaussian processes is developed to predict flooding for packed liquid-liquid and high-pressure extraction columns. The optimized Gaussian process for the liquid-liquid extraction column results in an average absolute relative error (AARE) of 15.23 %, whereas the algorithm for the high-pressure extraction column results in an AARE of 13.68 %. Both algorithms can predict flooding curves for different packing geometries and chemical systems precisely.     

InP D-HBT ICs for 40-Gb/s and higher bitrate lightwave transceivers

The combination of device speed (f/sub T/, f/sub max/ > 150 GHz) and breakdown voltage (V/sub bceo/ > 8 V) makes the double heterojunction bipolar InP-based transistor (D-HBT) an attractive technology to implement the most demanding analog functions of 40-Gb/s transceivers. This is illustrated by the performance of a number of analog circuits realized in an InP D-HBT technology with an 1.2- or 1.6-/spl mu/m-wide emitter finger: a low phase noise push-push voltage-controlled oscillator with -7-dBm output power at 146 GHz, a 40-GHz bandwidth and low-jitter 40-Gb/s limiting amplifier, a lumped 40-Gb/s limiting driver amplifier with 4.5-V/sub pp/ differential output swing, a distributed 40-Gb/s driver amplifier with 6-V/sub pp/ differential output swing, and a number of distributed preamplifiers with up to 1.3-THz gain-bandwidth product.     

Investigation of the action of flame retardants in cellulose. I. Investigation of the flame retardant action of 2,2′-oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane-2,2′-disulfide) in cellulose

Pyrolysis experiments were performed in high vacuum and under reduced air pressure (100 Pa). The volatile products of pure cellulose and cellulose containing various amounts of flame retardant 2,2′-oxybis (5,5-dimethyl-1,3,2-dioxaphosphorinane-2,2′-disulfide), i.e., Sandoflam 5060 of Sandoz AG, were studied by means of gas chromatography in combination with mass spectroscopy. The volatile products were characterized with infrared spectroscopy. The studied revealed that the incorporation of the flame retardant enhanced the water release and shifted the onset of this reaction to lower temperature. On the basis of these findings an explanation for the mechanism of flame retardancy in generated cellulose fibers modified with this particular flame retardant is attempted. From experiments with different residual air pressure the influence of oxygen on the primary processes of the pyrolytic degradation of cellulose is being discussed.     

Influence of Reaction Parameters on the Hydrogenolysis of Hydroxymatairesinol Over Carbon Nanofibre Supported Palladium Catalysts

The density functional theory (DFT/B3LYP) calculations were applied to investigate the interaction of a Pt₆ particle with the ZSM-5 zeolite framework. The electronic structure of the metal particle is strongly affected by the interaction with basic framework oxygens and acid sites of the zeolite support. Adsorption on basic sites (E_ads = 6 kcal/mol) favors the formation of the electron enriched metal cluster. Interaction of the platinum cluster with the acid site characterized by stabilization energy of 47 kcal/mol results in oxidation of the metal particle and suppression of Brønsted acidity of the support. The hypothesis is put forward that the oxidized platinum particle can function as an active site for the alkane isomerisation on platinum supported high silica zeolites.     

Pruning Algorithms for Rule Learning

Pre-pruning and Post-pruning are two standard techniques for handling noise in decision tree learning. Pre-pruning deals with noise during learning, while post-pruning addresses this problem after an overfitting theory has been learned. We first review several adaptations of pre- and post-pruning techniques for separate-and-conquer rule learning algorithms and discuss some fundamental problems. The primary goal of this paper is to show how to solve these problems with two new algorithms that combine and integrate pre- and post-pruning.     

The value of long tendons in design of tunnel layout and support

A project was initiated from hypotheses that the use of longer and different types of tendon support could lead to improved control of tunnel deformation in changing stress fields. An extensive literature study was conducted. Subsequently a tunnel was supported with various lengths and types of cable tendons. The tunnel was subjected to mining-induced stress changes. Tunnel deformations were measured using instrumentation. Results from the literature study and tunnel deformation measurements indicated within context that: (1) long tendons or other support systems cannot substitute for good tunnel layout; (2) long tendons effect a retain-and-hold function while shorter tendons strengthen and reinforce highly fractured tunnel walls; (3) larger boreholes or weakergrout reduce support system stiffness; (4) cable tendons have high shear resistance and debonding tendency; (5) long tendons are beneficial in sidewalls but not the hangingwall, (6) long tendons induce a more stable sidewall deformation distribution; (7) the updip sidewall deformed less than downdip; (8) more deformation occurred with stress decrease than with stress increase.     

In-situ-Messung der Stickoxidkonzentration in turbulenten Diffusionsflammen

Zusammenfassung Die laserspektroskopischen Me?methoden laserinduzierte Fluoreszenz und spontane Ramanspektroskopie werden eingesetzt zur Messung der Konzentrationen von Stickoxid, Hydroxyl sowie der chemischen Hauptkomponenten und der Temperatur. Betrachtet wird die thermische Umsetzung von Wasserstoff mit Luftsauerstoff. Es wird die experimentelle Vorgehensweise und Problematik dargestellt. Ebenso wird der Weg der Modellierung und Berechnung turbulenter Verbrennungsvorg?nge am konkreten Beispiel skizziert. Die Annahme chemischen Gleichgewichts stellt sich als ungenügend in der Berechnung der Stickoxid- und Hydroxylkonzentrationen heraus. Eine deutlich bessere Vorhersage wird durch Einführen einer Reaktionsfortschrittsvariablen für das chemische Modell erreicht.     

Rapid isothermal processing for fabrication of GaAs-basedelectronic devices [HBTs]

The use of rapid isothermal processing (RIP) is detailed for each of the three annealing steps in the fabrication of heterostructure-based devices such as heterojunction bipolar transistors (HBTs). RIP can be used for the alloying of ohmic metal contacts, annealing of ion-bombarded regions for device isolation or parasitic capacitance reduction, and for conventional implant activation annealing. High-speed (f_T=65 GHz) HBTs were achieved using RIP for all of the required heating steps. The authors compare the use of several types of silicon carbide-coated graphite susceptors for eliminating slip formation on 2- and 3-in-diameter GaAs wafers during high-temperature implant activation annealing     

Gain-coupled DFB lasers with a titanium surface Bragg grating

The improved performance of gain-coupled DFB lasers incorporating a titanium surface Bragg grating and a strained layer multiquantum well active region for operation at 1.55 μm is presented. Besides the essentially simplified fabrication process, the incorporation of the metallic, absorptive grating yields stable singlemode operation with a high sidemode suppression