Conservation and Improvement of the Natural Environment in Reservoir Watersheds in Japan

This paper discusses environmental conservation in reservoir watersheds, an important aspect relating to dam construction. The discussion of the subject describes how, in response to today's growing awareness of environmental issues, measures to absolutely minimize the effects on the environment of a dam project that will submerge the natural environment should be included in initial project plans, and how special concern for the environment ought to be shown throughout project implementation. Details are explained by introducing examples encountered in Japan.     

Molecular motion in cured epoxy resin filled with mica flakes

Molecular motion in cured epoxy resin filled with mica flakes was investigated by dynamic mechanical and broad-line nuclear magnetic resonance measurements. Temperature dependences of dynamic modulus and tanδ were determined at 10 Hz for samples containing various amounts of filler. A primary dispersion temperature, T_∞, corresponding to the glass transition, shifts to higher temperature with increasing filler volume fraction V_f. The magnitudes of the slope parameters H_r (representing storage modulus E′ data below T_g) decreased with increasing V_f, but H_g (representing E′ data below T_g) remained nearly constant over the whole loading range studied here. NMR line shapes were observed over the temperature range from room temperature to about 200°C for unfilled and filled samples. Each sample showed a distorted line shape in the transition region where major narrowing occurs. The distorted line shape was decomposed into both broad and narrow components by Gaussian analysis. The temperature range where both components can be obtained becomes broader with increasing filler content. The possibility is set forth that the filler immobilizes the chain segments and causes a different distribution of local mobility around the junction point.     

Immunomodulatory Properties and Osteogenic Activity of Polyetheretherketone Coated with Titanate Nanonetwork Structures

Polyetheretherketone (PEEK) is a potential substitute for conventional metallic biomedical implants owing to its superior mechanical and chemical properties, as well as biocompatibility. However, its inherent bio-inertness and poor osseointegration limit its use in clinical applications. Herein, thin titanium films were deposited on the PEEK substrate by plasma sputtering, and porous nanonetwork structures were incorporated on the PEEK surface by alkali treatment (PEEK-TNS). Changes in the physical and chemical characteristics of the PEEK surface were analyzed to establish the interactions with cell behaviors. The osteoimmunomodulatory properties were evaluated using macrophage cells and osteoblast lineage cells. The functionalized nanostructured surface of PEEK-TNS effectively promoted initial cell adhesion and proliferation, suppressed inflammatory responses, and induced macrophages to anti-inflammatory M2 polarization. Compared with PEEK, PEEK-TNS provided a more beneficial osteoimmune environment, including increased levels of osteogenic, angiogenic, and fibrogenic gene expression, and balanced osteoclast activities. Furthermore, the crosstalk between macrophages and osteoblast cells showed that PEEK-TNS could provide favorable osteoimmunodulatory environment for bone regeneration. PEEK-TNS exhibited high osteogenic activity, as indicated by alkaline phosphatase activity, osteogenic factor production, and the osteogenesis/osteoclastogenesis-related gene expression of osteoblasts. The study establishes that the fabrication of titanate nanonetwork structures on PEEK surfaces could extract an adequate immune response and favorable osteogenesis for functional bone regeneration. Furthermore, it indicates the potential of PEEK-TNS in implant applications.     

Illumination control system for adaptive dynamic range control

Abstract— We have developed an illumination control system for adaptive dynamic range control. This system satisfies several performance requirements for image quality and reliability. A projection system using the illumination control system can reproduce images with optimum brightness for each image.     

Hole-injection properties of annealed polythiophene films to replace PEDOT–PSS in multilayered OLED systems

Hole-injection properties of annealed poly(alkoxy- and alkylthiophene) films in OLEDs were studied. Among them, annealed poly(3,3′-dihexyloxy-2,2′-bithiophene) (aPHOBT) film exhibited good hole-injection properties and a triple-layered OLED with the structure ITO/aPHOBT/PVK/Alq3/Mg–Ag (device I) showed much higher performance than a double-layered device without the aPHOBT layer (device II, ITO/PVK/Alq3/Mg–Ag). Device I was slightly inferior to a device having a PEDOT–PSS layer as the hole injector (device III, ITO/PEDOT– PSS/PVK/Alq3/Mg–Ag) in the low-intermediate region of the applied voltage (6–11 V), but gave comparable luminance to III when the applied voltage exceeded 11 V.     

Conservation and improvement of the environment in dam reservoirs

Dams in Japan have contributed a great deal to the protection of life and properties, effectively prevented damage caused by floods, supported the maintenance of the normal functions of the river flow, and improved and conserved river environments. However, in recent years, many people in Japan have raised questions about the existing dams and dam projects without correct evaluation of the past impacts of dams. It has therefore become difficult to plan new dam projects and to operate existing dams properly as intended. People opposed to dams have commonly argued that dams inflict more damage on the environment than any other structure. For the reason that a dam will submerge its natural surroundings, counter measures to minimize its effects on the environment as much as possible should be taken, through every stage of the project. Particular attention should be given at the planning stage of dam projects. The latest developments in the conservation of the environment following dam construction and the concrete measures taken by dam constructors to follow the regulations concerned in Japan are described. The mitigation of the environmental impacts of dams and the restoration of the environments of downstream rivers are now the major issues.     

Population estimation from Landsat imagery

The paper introduces a method of population estimation using the Landsat MSS data. The radiance in the four spectral bands, detected by the multi spectral scanner (MSS) depends upon the ground covering materials, albeit the land use of the area. A mathematical model is set up to express the relation between the reflected electromagnetic energy of sample areas and their population distribution. Landsat 1 and Landsat 3 data of the Kanto area (including Tokyo Metropolitan), acquired in 1972 and 1979, are used along with ground-based census data of 1970 and 1975 to monitor the population distribution and its temporal changes. The method provided a reliable assessment of the population density in residential zones, however land-use classification using MSS imagery previous to the modeling is expected to improve the results.     

Development of anchored oligothiophenes on substrates for the application to the tunable transparent conductive films

Bis(triethoxysilyl)-substituted oligothiophene with a moderate π-conjugation length was newly synthesized and polymerized to give a polysilsesquioxane network having oligothiophene units dispersed homogeneously without phase separation. The polymer was fixed on glass or ITO substrate by spin-coating and annealing. The resulting film exhibited a high mechanical strength due to the covalent bonding with the substrates, and was electrochemically stable even after 300 redox cycles in electrolyte solution. Chemical oxidation of the polymer films yielded electrically conductive and almost transparent films.     

Degradation of organophosphorus pesticides in aqueous extracts of young green barley leaves (Hordeum vulgare L)

The degradation of the organophosphorus pesticides malathion, chlorpyrifos, guthion, diazinon, methidathion and parathion in an aqueous extract of young green barley leaves (Hordeum vulgare L) was monitored by gas chromatography. Aqueous solutions of various amounts of freeze‐dried young barley leaves containing 5.75 mg l⁻¹ of malathion were incubated at 37 °C and pH 7.4 over prolonged time periods. Over 95% of the malathion degraded in 4 h in a 3% (30 g l⁻¹) solution of young green barley leaves. When the barley solution was autoclaved at 120 °C for 25 min prior to the addition of malathion, no degradation of malathion was observed. When 10 mg l⁻¹ each of the above six pesticides was incubated in a 15% (150 g l⁻¹) solution of young green barley leaves for 3 h at 37 °C and pH 7.4, malathion and chlorpyrifos degraded 100%, whereas parathion (75%), diazinon (54%), guthion (41%) and methidathion (23%) showed lesser degrees of degradation. © 1999 Society of Chemical Industry     

Development of a simple method for fabrication of transparent conductive films with high mechanical strength

We have developed a simple method of fabricating transparent conductive films with a high mechanical strength on glass and indium tin oxide substrates. It does not require a large excess of organic solvents and polymerization catalysts and can yield smooth films by spin-coating of a mixture of a commercially available aqueous dispersion of poly(3,4-ethylenedioxythiophene)-poly(4-styrene sulfonate) and a neat liquid of tetraethyl orthosilicate. Preparation conditions such as feed ratio, kinds of additives, and annealing temperature and time were optimized to give highly conductive, transparent and mechanically strong films.