Formation of Arrayed Droplets by Soft Lithography and Two-Phase Fluid Flow, and Application in Protein Crystallization

This paper presents an overview of our recent work on the use of soft lithography and two-phase fluid flow to form arrays of droplets. The crucial issues in the formation of stable arrays of droplets and alternating droplets of two sets of aqueous solutions include the geometry of the microchannels, the capillary number, and the water fraction of the system. Glass capillaries could be coupled to the PDMS microchannels and droplets could be transferred into glass capillaries for long-term storage. The arrays of droplets have been applied to screen the conditions for protein crystallization with microbatch and vapor diffusion techniques.     

噪声与低噪声设计的探讨（下篇）

这是分上下篇连载的下篇(上篇见5月份的本刊)，介绍了几个基本概念，使你能开始考虑如同进行低噪声设计。     

噪声与低噪声设计的探讨（上篇）

噪声是许多信号处理系统的基本制约因素.同样,它是许多电子设计,特别是接口电路的主要制约条件.在测试与测量、医学成像和高速数据通信等方面的行业趋向都需要越来越高的信息密度.与此同时,半导体工艺的进步能实现更高的数据处理速度和功能密度,但却要降低工作电源电压,由此降低信号幅度.结果是,加大了系统设计对模拟前端噪声性能进行管理的压力.     

Low-Power VLSI Implementation of the Inner Receiver for OFDM-Based WLAN Systems

In this paper, we propose low-power designs for the synchronizer and channel estimator units of the Inner Receiver in wireless local area network systems. The objective of the work is the optimization, with respect to power, area, and latency, of both the signal processing algorithms themselves and their implementation. Novel circuit design strategies have been employed to realize optimal hardware and power efficient architectures for the fast Fourier transform, arc tangent computation unit, numerically controlled oscillator, and the decimation filters. The use of multiple clock domains and clock gating reduces the power consumption further. These blocks have been integrated into an experimental digital baseband processor for the IEEE 802.11a standard implemented in the 0.25mum- 5-metal layer BiCMOS technology from Institute for High Performance Microelectronics.     

造就产品更牢靠的电路保护方法

几乎所有电子OEM领域的功能密度正在日益增长，使宝贵的硅片更易于受到真实世界的损害。采取花钱较少的简单措施，就可以保护您的产品和您公司的声望，还能在极端情况下保护您的客户。     

Effect of ionic content,solid content,degree of neutralization,and chain extension on aqueous polyurethane dispersions prepared by prepolymer method

There are many variables in the preparation of aqueous polyurethane (PU) dispersions. Carboxylic acid content, solid content, degree of pre/postneutralization of the carboxylic acids, and chain extension all impact dispersion particle size, viscosity, pH, molecular weights, and glass transition temperature. This study evaluated the impact of these variables on a given PU dispersion formulation prepared from isophorone diisocyanate, an aliphatic polyester polyol, dimethylol propionic acid, and hexamethylene diamine with triethyl amine as the neutralizing base and N‐methyl pyrrolidone as the cosolvent. Changes in carboxylic acid content, degree of preneutralization, and chain extension were found to have the expected impacts on dispersions properties. Increased ionic content in the dispersion step led to lower particle size and higher viscosity, increased chain extension with its concurrent increase in molecular improved subsequent film properties. Surprising results were obtained by varying the amount of postneutralization and from increased solids content at the time of dispersion. Unexpectedly, both of these variations led to much higher dispersion viscosities and particle size in solution. To have these changes take place, it is theorized that there is a major change in solution morphology caused by these modifications. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2514–2520, 2005     

Nanostructured polymer blends: Synthesis and structure

Nanostructured polymer blends prepared via anionic ring opening polymerizations of cyclic monomers in the presence of a pre-made polymer melt exhibit a number of special properties over traditional polymer blends and homopolymers. Here, we report on a simple and versatile method of in situ polymerization of macrocyclic carbonates in the presence of a maleic anhydride polypropylene (mPP) matrix and a surface-active compatibilizer (i.e. PC grafted onto a mPP backbone generated in situ) to yield a micro- and nanostructured polymer blends consisting of a polycarbonate (PC) minor phase, and a polypropylene (PP) major phase. By varying the processing conditions and concentration of the macrocyclic carbonate it was possible to reduce the size of the PC dispersions to an average minor diameter of 150 nm. NMR and TEM characterizations indicate that the PC dispersions do not influence crystal content in the PP phase. Overall, the results point to a simple strategy and versatile route to new polymeric materials with enhanced benefits.     

From dissonance to disidentification: Selectivity in the self-affirmation process.

Two studies examined the relationship between the content of a self-threat and the attractiveness of available self-affirmations (C. M. Steele, 1988). After self-threat was induced by means of a cognitive dissonance procedure, participants' choices for affirmations were examined in order to explore whether the attractiveness of a given affirmation depends on its relevance to the threatened domain of the self-concept. The authors hypothesized that when faced with a threat to a specific self-conception or standard, individuals may forego affirmations within the threatened self-concept domain in favor of affirmations of unrelated, compensatory domains. Both studies supported this hypothesis and further suggested that such selective self-affirmation can lead individuals to modify their self-concepts by identifying with self-aspects that justify dissonant behavior and by disidentifying with the standards that such behavior violates. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effects of a Nd—Fe—B magnetic filler on the crystallization of poly(phenylene sulfide)

The crystallization of poly(phenylene sulfide) (PPS) in a polymer–magnetic Nd—Fe—B powder suspension was studied. Isothermal crystallization behavior was analyzed by way of differential scanning calorimetry, and the kinetics were described via the Avrami equation. The Avrami parameters and the crystallization times were strongly affected by both the particle size and the presence of a coupling agent coated on the filler particles. The small Nd—Fe—B particles exhibited long induction and half‐times, whereas the large particles tended to have short crystallization times. Particles ranging from 38 to 150 μ appeared to have similar crystallization times and to have no significant change in the value of Avrami index with melt crystallization temperature. As a result of these analyses, the dynamic mechanical properties were determined to correlate the fundamental polymer crystallization characteristics and the physical properties of the PPS binder. The enhancement of the wetting of the filler to the binder was promoted through the coupling agent, as confirmed by dynamic mechanical testing performed on the samples. The storage modulus typically decreased because of the presence of the uncoated small particles. Conversely, the loss modulus was enhanced because of the presence of the coated small particles in the PPS binder. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1091–1102, 2002     

重构与模式

《Refactoring to Patterns》曾荣获2005年《软件开发》杂志图书通用类的效率大奖(Productivity Award)。书中介绍了以模式为导向的重构方法的理论和实践,记录了潜藏在20多个基于模式的设计转换之下的思想方法和设计步骤,对于模式差异以及如何以尽可能简单的方式实现模式提出了颇有见解的观点。《Refactoring to Patterns》中文版将由人民邮电出版社编译出版,本文节选了部分内容让读者先睹为快,限于篇幅,略有删节。