Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Edge-to-edge interfaces in Ti?Al modeled with the embedded atom method

The atomistic structure and energies of high-index interphase boundaries are explored using a combination of molecular statics and dynamics simulations with embedded atom potentials. We investigate planar boundaries between the α₂ and γ phases in the Ti−Al system. The class of boundaries considered has a high-index boundary orientation; the orientation relationship between the α₂ and γ phases also is high index, and a set of planes from each phase meet edge to edge at the boundary plane. For the particular case of a boundary that is commensurate in one direction and coincides with a moiré plane given by the so-called “Δg” diffraction condition, the boundary is not structurally singular, but it is energetically stable and does not appear to dissociate into other low-energy configurations. Misfit compensating defects are not observed; misfit in directions other than the commensurate one appears to be distributed uniformly. The boundary energy is evaluated as a function of the orientation of the boundary plane, and the edge-to-edge (moiré) boundary is found to lie in an energy cusp. This article is based on a presentation made in the “Hume-Rothery Symposium on Structure and Diffusional Growth Mechanisms of Irrational Interphase Boundaries,” which occurred during the TMS Winter meeting, March 15–17, 2004, in Charlotte, NC, under the auspices of the TMS Alloy Phases Committee and the co-sponsorship of the TMS-ASM Phase Transformations Committee.     

Hydrogenases, accessory genes and the regulation of [NiFe] hydrogenase biosynthesis in Thiocapsa roseopersicina

The purple (Sulphur) phototrophic bacterium, Thiocapsa roseopersicina BBS contains several [NiFe] hydrogenases, of which two are membrane bound. Mutant T. roseopersicina cells, carrying deletions in both gene clusters showed hydrogenase activity. This activity was located in the cytoplasm. The structural gene cluster hoxEFUYH was identified and sequenced. In addition, genes homologous to hupUV/hoxBC, the hydrogen sensing hydrogenase have been identified and sequenced.Regulation of hydrogenase biosynthesis was studied in detail for HydSL (renamed HynSL). A random mutagenesis system was optimised for T. roseopersicina. One of the mutations was in a gene similar to that coding for the HypF proteins in other organisms. Inactivation of the hypF gene resulted in a 60-fold increase in hydrogen evolution under nitrogen fixing conditions. In addition to hypF, the following accessory genes were identified: hydD, hupK, hypC1, hypC2, hypDE. Characterisation of the corresponding gene products and search for additional accessory genes are in progress.     

Minimum cost design of a cellular plate loaded by uniaxial compression

Cellular plates are constructed from two base plates and an orthogonal grid of stiffeners welded between them. Halved rolled I-section stiffeners are used for fabrication aspects. The torsional stiffness of cells makes the plate very stiff. In the case of uniaxial compression the buckling constraint is formulated on the basis of the classic critical stress derived from the Huber’s equation for orthotropic plates. The cost function contains the cost of material, assembly and welding and is formulated according to the fabrication sequence. The unknown variables are the base plate thicknesses, height of stiffeners and numbers of stiffeners in both directions. The cellular plate is lighter and cheaper than the plate stiffened on one side. The Particle Swarm Optimization and the IOSO techniques are used to find the optimum. PSO contains crazy bird and dynamic inertia reduction criteria, IOSO is based on a response surface technology.     

Floral volatiles ofTanacetum vulgare L. attractive toLobesia botrana den. et schiff. females

The European grapevine moth (EGVM),Lobesia botrana, is a major pest of grapes in Europe. Females are attracted to a nonhost plant: tansy (Tanacetum vulgare L.), which is a common weed in Slovakian vineyards. A steam distillate extract of tansy flowers was analyzed by means of a GC-EAG technique to screen constituents detected by the olfactory receptors of EGVM females. From more than 200 GC peaks, nine peaks corresponding to monoterpenoids released an EAG response in more than 70% of the females (N=15):p-cymene,d-limonene,-thujene,-thujone,-thujone, thujyl alcohol, terpinene-4-ol, (Z)-verbenol, and piperitone. The steam distillate of tansy as well as a synthetic blend of identified compounds released consistent attraction in a field cage. The use of nonhost plants and host plant odors in integrated pest management is discussed.     

Changes in the size and docosahexaenoic acid content of adipocytes during chick embryo development

The development of adipose tissue in the chick embryo was investigated using two groups of fertile eggs which differed by 1.7-fold in their initial yolk lipid levels. The triacylglycerol content of the subcutaneous adipose depot in both groups increased dramatically from day 12 of the 21-day embryonic period, attaining a maximal value just prior to hatching. During this period, the amount of triacylglycerol deposited in the adipose tissue was very highly correlated with the amount of lipid transferred from the yolk. The triacylglycerol content of the depot was also dependent on the initial yolk lipid content. During the hatching period, the amount of adipose triacylglycerol remained approximately constant in the group with the higher initial yolk lipid content but, in the case of the group with the lower initial yolk lipid levels, decreased by approximately 25%. The size distribution of adipocytes isolated from the tissue was determined by computerized image analysis microscopy. The mean adipocyte diameter increased from approximately 6 to 35 μm between days 12 and 19, irrespective of the initial yolk content, although development within the eggs with the lower initial yolk content resulted in a decrease in cell size over the hatching period. Both the triacylglycerol and phospholipid fractions of the isolated adipocytes contained substantial proportions (approximately 6%, w/w) of docosahexaenoic acid (DHA) at days 12 and 14, and lower levels of this fatty acid at the later stages. The amount (mg/depot) of DHA in adipose triacylglycerol decreased dramatically over the hatching period. The amount (mg/brain) of DHA in brain phospholipid increased by more than 5-fold between day 12 of development and hatching. A possible explanation for the data may be that DHA is preferentially mobilized from adipose tissue in order to deliver the fatty acid to the developing neural tissues in a form suitable for uptake.     

The Pupal Parasitoid Trichopria drosophilae Is Attracted to the Same Yeast Volatiles as Its Adult Host

Journal of Chemical Ecology - There is increasing evidence that microorganisms, particularly fungi and bacteria, emit volatile compounds that mediate the foraging behaviour of insects and therefore...     

Minimum cost design of laterally loaded welded rectangular cellular plates

Material and fabrication costs are included in the cost function. The fabrication cost is calculated by three formulae relating to the preparation, welding and additional costs. The design constraints are related to bending stresses, the local buckling of ribs due to bending and shear and to the limitation of the plate thicknesses. The local buckling of the compressed face plate elements is considered by an effective width calculation. In the numerical examples, the variables are the plate dimensions and the numbers of ribs in two directions. The optimization is carried out for steel Fe 360 and Fe 510 and for various values of the fabrication cost factor. The computations are performed by using the backtrack discrete combinatorial method, Rosenbrock's Hillclimb method and the FSQP method developed by Zhou and Tits (1992), and the results are compared with each other.Partly presented at the international conference Structural Optimization '93, Rio de Janeiro, August 2–6, 1993.