Piezoelectric properties of PVDF-conjugated polymer nanofibers

This study presents the development and characterization of PVDF-conjugated polymer nanofiber-based systems. Five different conducting polymers (CPs) were synthesized successfully and used to create the nanofiber systems. The CPs used are polyaniline (PANI), polypyrrole (PPY), polyindole (PIN), polyanthranilic acid (PANA), and polycarbazole (PCZ). Nanofiber systems were produced utilizing the Forcespinning® technique. The nanofiber systems were developed by mechanical stretching. No electrical field or post-process poling was used in the nanofiber systems. The morphology, structure, electrochemical and piezoelectric performance was characterized. All of the nanofiber PVDF/CP systems displayed higher piezoelectric performance than the fine fiber PVDF systems. The PVDF/PPY nanofiber system displays the highest piezoelectric performance of 15.56 V. The piezoelectric performance of the PVDF/CP nanofiber systems favors potential for an attractive source of energy where highly flexible membranes could be used in power actuators, sensors and portable, and wireless devices to mention some.     

Influence of the dispersion of Nanoclays on the cellular structure of foams based on polystyrene

In the present work blends of polystyrene (PS) with sepiolites have been produced using a melt extrusion process. The dispersion degree of the sepiolites in the PS has been analyzed by dynamic shear rheology and X-ray micro-computed tomography. Sepiolites treated with quaternary ammonium salts (O-QASEP) are better dispersed in the PS matrix than natural sepiolites (N-SEP) or sepiolites organo-modified with silane groups (O-SGSEP). A percolated network is obtained when using 6.0 wt% of O-QASEP, 8.0 wt% of N-SEP and 10.0 wt% of O-SGSEP. It has been shown that multiple extrusion processes have a negative effect on the polymer architecture. They produce a reduction in the length of the polymeric chains, and they do not lead to a better dispersion of the particles in the polymer matrix. Foams have been produced using a gas dissolution foaming process, where a strong effect of the dispersion degree on the cellular structure of the different foams was found. The effects on the cellular structure obtained by using different types of sepiolites, different contents of sepiolites and different extrusion conditions have been analyzed. The foams produced with the formulations containing O-QASEP present the lowest cell size and the most homogeneous cellular structures.     

Rate of ammonia oxidation in a synthetic saline wastewater by a nitrifying mixed‐culture

Most of the kinetic studies on nitrification have been performed in diluted salts medium. In this work, the ammonia oxidation rate (AOR) was determined by respirometry at different ammonia (0.01 and 33.5 mg N‐NH₃ L^?1), nitrite (0–450 mg N‐NO₂^? L^?1) and nitrate (0 and 275 mg N‐NO₃^? L^?1) concentrations in a saline medium at 30 °C and pH 7.5. Sodium azide was used to uncouple the ammonia and nitrite oxidation, so as to measure independently the AOR. It was determined that ammonia causes substrate inhibition and that nitrite and nitrate exhibit product inhibition upon the AOR. The effects of ammonia, nitrite and nitrate were represented by the Andrews equation (maximal ammonia oxidation rate, r_AOMAX, = 43.2 [mg N‐NH₃ (g VSS_AO h)^?1]; half saturation constant, K_SAO, = 0.11 mg N‐NH₃ L^?1; inhibition constant K_IAO, = 7.65 mg N‐NH₃ L^?1), by the non‐competitive inhibition model (inhibition constant, K_INI, = 176 mg N‐NO₂^? L^?1) and by the partially competitive inhibition model (inhibition constant, K_INA, = 3.3 mg N‐NO₃^? L^?1; α factor = 0.24), respectively. The r_AOMAX value is smaller, and the K_SAO value larger, than the values reported in diluted salts medium; the K_IAO value is comparable to those reported. Process simulations with the kinetic model in batch nitrifying reactors showed that the inhibitory effects of nitrite and nitrate are significant for initial ammonia concentrations larger than 100 mg N‐NH₄⁺ L^?1. Copyright © 2005 Society of Chemical Industry     

Pattern expressions and pattern automata

We define the pattern expressions as an extension of both regular expressions and patterns. We prove several properties of the new family of languages, similar to those of extended regex languages [Câmpeanu et al., Int. J. Found. Comput. Sci. 14 (6) (2003) 1007-1018]. We also define an automata system that recognizes these languages. Differences between regex and pattern expressions are also discussed.     

Effect-Size Indices for Dichotomized Outcomes in Meta-Analysis.

It is very common to find meta-analyses in which some of the studies compare 2 groups on continuous dependent variables and others compare groups on dichotomized variables. Integrating all of them in a meta-analysis requires an effect-size index in the same metric that can be applied to both types of outcomes. In this article, the performance in terms of bias and sampling variance of 7 different effect-size indices for estimating the population standardized mean difference from a 2 × 2 table is examined by Monte Carlo simulation, assuming normal and nonnormal distributions. The results show good performance for 2 indices, one based on the probit transformation and the other based on the logistic distribution. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Evaluation, modelling and optimization of the cleaning process of contaminated plastic food refillables

In this study several types of bottle materials (glass, PET (polyethylene terephthalate), PC (polycarbonate), HDPE (high density polyethylene), PP (polypropylene) and PVC (polyvinyl chloride)) were evaluated in order to be used as food refillables, comparing the residual chemical contamination after classical caustic washing. Bottles were contaminated with model chemicals (chloroxylenol and d-limonene) and caustic washed with varied process parameters using a simulated laboratory-scale washing procedure. After washing, the chemical-contaminated bottles were filled with water and stored for 28 days at 37 degrees C. The concentrations of the model chemicals in the water after storage were taken as a measure of chemical contamination. The influence of the cleaning parameters (temperature, caustic and commercial additive concentration) was studied using response surface methodology. Washing temperature showed a significant influence on the removal of absorbed chemicals from surfaces compared with the effect of the caustic and especially the additive concentration. Optimization of caustic cleaning for the cleaning process in question led to better cleaning effectiveness, although none of the different washing conditions were able to remove all absorbed chemicals out of the polymeric resins. Commercially available plastic refillables (PET and PC) showed the best chemical rinsability. Glass bottles, however, had in every case the best rinsing characteristics.     

Ornament and function

The architects and builders in the past lacked our knowledge concerning fluid dynamics, but they exhibited a deep rooted ability to observe and reflect - thus, different cultures have developed by trial and error. The authors have produced a stimulating analysis which couples the science of fluid dynamics and a sensitive understanding of past cultures. The paper is recommended reading.