Chemistry and Toxicology of Major Bioactive Substances in Inocybe Mushrooms

Mushroom poisoning has always been a threat to human health. There are a large number of reports about ingestion of poisonous mushrooms every year around the world. It attracts the attention of researchers, especially in the aspects of toxin composition, toxic mechanism and toxin application in poisonous mushroom. Inocybe is a large genus of mushrooms and contains toxic substances including muscarine, psilocybin, psilocin, aeruginascin, lectins and baeocystin. In order to prevent and remedy mushroom poisoning, it is significant to clarify the toxic effects and mechanisms of these bioactive substances. In this review article, we summarize the chemistry, most known toxic effects and mechanisms of major toxic substances in Inocybe mushrooms, especially muscarine, psilocybin and psilocin. Their available toxicity data (different species, different administration routes) published formerly are also summarized. In addition, the treatment and medical application of these toxic substances in Inocybe mushrooms are also discussed. We hope that this review will help understanding of the chemistry and toxicology of Inocybe mushrooms as well as the potential clinical application of its bioactive substances to benefit human beings.     

A study of the local site effects on the ground response for the city of Eskişehir,Turkey

Bulletin of Engineering Geology and the Environment - Local soil characteristics play a key role in determining soil-structure interaction and reliability of the superstructure behavior under...     

Characterization of the specificities of human blood group H gene-specified alpha 1,2-L-fucosyltransferase toward sulfated/sialylated/fucosylated acceptors: evidence for an inverse relationship between alpha 1,2-L-fucosylation of Gal and alpha 1,6-L-fucosylation of asparagine-linked GlcNAc

The assembly of complex structures bearing the H determinant was examined by characterizing the specificities of a cloned blood group H gene-specified alpha 1,2-L-fucosyltransferase (FT) toward a variety of sulfated, sialylated, or fucosylated Gal beta 1,3/4GlcNAc beta- or Gal beta 1,3GalNAc alpha-based acceptor structures. (a) As compared to the basic type 2, Gal beta 1,4GlcNAc beta-(K(m) = 1.67 mM), the basic type 1 was 137% active (K(m) = 0.83 mM). (b) On C-6 sulfation of Gal, type 1 became 142.1% active and type 2 became 223.0% active (K(m) = 0.45 mM). (c) On C-6 sulfation of GlcNAc, type 2 showed 33.7% activity. (d) On C-3 or C-4 fucosylation of GlcNAc, both types 1 and 2 lost activity. (e) Type 1 showed 70.8% and 5.8% activity, respectively, on C-6 and C-4 O-methylation of GlcNAc. (f) Type 1 retained 18.8% activity on alpha 2,6-sialylation of GlcNAc. (g) Terminal type 1 or 2 of extended chain had lower activity. (h) With Gal in place of GlcNAc in type 1, the activity became 43.2%. (i) Compounds with terminal alpha 1,3-linked Gal were inactive. (j) Gal beta 1,3GalNAc alpha- (the T-hapten) was approximately 0.4-fold as active as Gal beta 1,4GlcNAc beta-. (k) C-6 sulfation of Gal on the T-hapten did not affect the acceptor activity. (l) C-6 sulfation of GalNAc decreased the activity to 70%, whereas on C-6 sulfation of both Gal and GalNAc the T-hapten lost the acceptor ability. (m) C-6 sialylation of GalNAc also led to inactivity. (n) beta 1,6 branching from GalNAc of the T-hapten by a GlcNAc residue or by units such as Gal beta 1, 4GlcNAc-, Gal beta 1,4(Fuc alpha 1,3)GlcNAc-, or 3-sulfoGal beta 1,4GlcNAc- resulted in 111.9%, 282.8%, 48.3%, and 75.3% activities, respectively. (o) The enhancement of enzyme affinity by a sulfo group on C-6 of Gal was demonstrated by an increase (approximately 5-fold) in the K(m) for Gal beta 1,4GlcNAc beta 1,6(Gal beta 1,3)GalNAc alpha-O-Bn in presence of 6-sulfoGal beta 1,- 4GlcNAc beta-O-Me (3.0 mM). (p) Among the two sites in Gal beta 1, 4GlcNAc beta 1,6(Gal beta 1,3) GalNAc alpha-O-Bn, the enzyme had a higher affinity ( > 3-fold) for the Gal linked to GlcNAc. (q) With respect to Gal beta 1,- 3GlcNAc beta-O-Bn (3.0 mM), fetuin triantennary asialo glycopeptide (2.4 mM), bovine IgG diantennary glycopeptide (2.8 mM), asialo Cowper's gland mucin (0.06 mM), and the acrylamide copolymers (0.125 mM each) containing Gal beta 1,3GlcNAc beta-, Gal beta 1,3(6-sulfo)GlcNAc beta-, Gal beta 1,3GalNAc alpha-, Gal beta 1,3Gal beta-, or Gal alpha 1,3Gal beta- units were 153.6%, 43.0%, 6.2%, 52.5%, 94.9%, 14.7%, 23.6%, and 15.6% active, respectively. (r) Fucosylation by alpha 1,2-L-FT of the galactosyl residue which occurs on the antennary structure of the bovine IgG glycopeptide was adversely affected by the presence of an alpha 1,6-L-fucosyl residue located on the distant glucosaminyl residue that is directly attached to the asparagine of the protein backbone. This became evident from the 4-fold activity of alpha 1,2-L-FT toward bovine IgG glycopeptide after approximately 5% removal of alpha 1,6-linked Fuo.     

Multiresolution coding techniques for digital television: A review

Multiresolution decompositions for video coding are reviewed. Both nonrecursive and recursive coding schemes are considered. In nonrecursive schemes, it is shown that pyramid structures have certain advantages over subband or wavelet techniques, and a specific spatiotemporal pyramid coding of HDTV is discussed in some detail. It is shown that recursive, DPCM like schemes will incur a slight loss of optimality due to a restricted form of prediction if multiresolution decomposition with compatible decoding is required. Compatibility and transmission issues are also discussed. Multiresolution transmission for digital broadcast TV is introduced. This, when combined with multiresolution source coding, achieves spectrum efficiency, robustness and graceful degradation under channel impairments.Invited PaperWork supported in part by the National Science Foundation under grants ECD-88-11111, MIP-90-14189 and Bell Communications Research.Work supported by the National Science Foundation under grants ECD-88-11111. K.M. Uz is now with David Sarnoff Research Center in Princeton, NJ 08543.     

Oxygen-enrichment of YBa2Cu3 YBa2Cu3O7-δ using the fluidization techniqueusing the fluidization technique

The oxygen-deficient phase of the highT _c superconductor, YBa₂Cu₃O₇, was oxygen-enriched using the fluidization technique to give good superconducting properties. The normal method of oxygen treatment at 900°C for 24 h and at 600°C for 24 h has been reduced to just one treatment at 600°C for 12 h by the fluidization technique to achieve almost the same strength of superconducting signal for the YBa₂Cu₃O₇ powder, which establishes the attractiveness of the latter route for the large-scale preparation of superconducting material. The particle sizes were in the range 0–90, 90–180 and 180–420 μm. The fluidized particles were crystalline with orthorhombic distortion.T _c ^onset , estimated using the a.c. magnetic susceptibility method, was 91·3 K. The volume fraction of superconducting material in the product was 83·7–85·3%, one of the highest values reported so far for YBa₂Cu₃O₇.     

基于XML和N层VSM的Web信息检索

基于XML文档格式良好、层次清晰，可以方便地操纵、分析其结构的特点。文中在将Web上的HTML文档转化为XML文档的基础上，通过Java中的DOM树，分析文档的层次结构。把文档分为层次化的文本段，对传统的VSM算法进行改进，把每个文本段转换为空间向量，实现了N层VSM算法，通过试验证明，改进后算法的查全率和查准率都要优于传统的VSM算法。     

Phase diagram modeling for titanium alloys with light element impurities

It is well known that low levels of light element impurities, such as oxygen and nitrogen, can significantly modify phase equilibria in conventional titanium alloys. However, although the role of nitrogen and oxygen as alpha stabilizers is well established, little quantitative work exists in ternary and higher order systems. Moreover the effect of such elements on equilibria with phases other than cx-and P-Ti is often unknown. The problems in measuring light elements at the microscopic level adds to the difficulty of establishing partitioning, and old axioms are often transferred to new alloys with little evidence that they are applicable. As part of a current program on titanium alloys, phase diagram modeling has been performed for a variety of titanium alloys with additions of oxygen and nitrogen. This paper presents results for the system Ti-Al-V-O-(N,C) with particular reference to the O additions to the commercially important alloy Ti-6A1-4V. This paper was presented at the International Phase Diagram Prediction Symposium sponsored by the ASM/MSD Thermodynamics and Phase Equilibria Committee at Materials Week, October 21–23,1991, in Cincinnati, OH. The symposium was organized by John Morral, University of Connecticut, and Philip Nash, Illinois Institute of Technology.     

Characterization of surface micromachined metallic microneedles

The purpose of the paper is to provide quantitative characterization of metallic microneedles. Mechanical and fluid flow experiments were performed to evaluate the buckling force, the penetration force, and the pressure versus flow rate characteristics of the microneedles. The microneedle design variations characterized included varying the shaft lengths, varying the tip taper angles/geometries, and the inclusion of micromechanical barbs. The penetration force was found to range from 7.8 gF for a microneedle of shaft length 500 /spl mu/m, to 9.4 gF for a length of 1500 /spl mu/m, both with a tip taper angle of 30/spl deg/. Microneedles with a linear tip taper angle of 30/spl deg/ penetrated 95 +% of the time without failure. The microneedles with a 15/spl deg/ and 20/spl deg/ linear tip taper penetrated 10% and 25% of the time, respectively. The buckling force was found to be 98.4 gF for a 500 /spl mu/m long microneedle shaft, 72.3 gF for a needle of shaft length 1000 /spl mu/m, and 51.6 gF for a 1500 /spl mu/m long shaft. The results demonstrate that the penetration force was 7.9% of the buckling force for 500 /spl mu/m long shafts, 11.6% for a 1000 /spl mu/m long shaft, and 18.2% for a 1500 /spl mu/m long microneedle shafts. The microneedle fluid flow characteristics were studied. An inlet pressure of 49.0 Pa was required for a flow rate of 1000 /spl mu/L/h and 243.0 Pa for a flow rate of 4000 /spl mu/L/h using air as the fluid medium. For water, an average pressure of 30.0 kPa was required for a flow rate of 1000 /spl mu/L/h and 106.0 kPa for a flow rate of 4000 /spl mu/L/h.     

Nodal ant colony optimization for solving profit based unit commitment problem for GENCOs

This paper proposes a nodal ant colony optimization (NACO) technique to solve profit based unit commitment problem (PBUCP). Generation companies (GENCOs) in a competitive restructured power market, schedule their generators with an objective to maximize their own profit without any regard for system social benefit. Power and reserve prices become important factors in decision process. Ant colony optimization that mimics the behavior of ants foraging activities is suitably implemented to search the UCP search space. Here a search space consisting of optimal combination of binary nodes for unit ON/OFF status is represented for the movement of the ants to maintain good exploration and exploitation search capabilities. The proposed model help GENCOs to make decisions on the quantity of power and reserve that must be put up for sale in the markets and also to schedule generators in order to receive the maximum profit. The effectiveness of the proposed technique for PBUCP is validated on 10 and 36 generating unit systems available in the literature. NACO yields an increase of profit, greater than 1.5%, in comparison with the basic ACO, Muller method and hybrid LR-GA.