Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

Zeolite synthesis from paper sludge ash with addition of diatomite

BACKGROUND: This study aimed to investigate the synthesis of zeolites from paper sludge ash (PSA) with added diatomite to remove both NH₄⁺ and PO₄^3? for water purification. The PSA had low Si and significant Ca contents. Four types of diatomite: white (T‐W) and brown (T‐B) from deposits of marine origin in Takanosu, and white (S‐W) and gray (S‐G) from lacustrine deposits in Shonai, were added to NaOH solution to increase the Si content and thereby synthesize zeolites with high cation exchange capacity (CEC). RESULTS: The order of the amounts of Si extracted from the diatomite to the alkali solution was S‐W > T‐W = T‐B > S‐G, which correlates with the amorphous SiO₂ content of diatomite. The original ash without addition of diatomite yielded hydroxysodalite with CEC of about 1.0 mmol g^?1. For all samples, the addition of diatomite to the solution yielded zeolite‐P with a higher CEC, but the addition of excess Si inhibited the synthesis of zeolite‐P, and the CEC of the product was low. A product with high CEC including zeolite‐P was obtained in a solution with around 500 mmol L^?1 of Si concentration, and had the ability to remove both NH₄⁺ and PO₄^3?. CONCLUSION: Diatomite has the potential for used as an additive for the synthesis of high CEC zeolite from PSA. The product with zeolite‐P exhibited relatively high CEC, capacity for NH₄⁺ uptake, and the ability to remove PO₄^3? by precipitation, which is preferable for water purification applications. Copyright © 2008 Society of Chemical Industry     

The influence of exercise intensity on sweating efficiency of the whole body in a mild thermal condition

The photodegradation of seven carbamate pesticides (bendiocarb, isoprocarb, promecarb, ethiofencarb, furathiocarb, fenoxycarb and pirimicarb), in aqueous solution, has been examined by GC-MS. The most general result was formation of the corresponding phenols. Irradiation of isoprocarb and promecarb also resulted in photo-Fries rearrangement to ortho- and para-hydroxybenzamides. In the case of ethiofencarb photocleavage of the carbon-sulfur bond gave 2-methylphenyl methylcarbamate as main product. Likewise, N-S bond cleavage occurred upon irradiation of furathiocarb, to allow the formation of the carbamate insecticide carbofuran, butyl methylcarbamate and carbofuranphenol. Under similar conditions, fenoxycarb gave p-phenylphenol and 2-hydroxydibenzofuran, through primary homolysis of the aryloxy-methylene bond. Finally, pirimicarb gave rise to 2-formylamino-5,6-dimethylpyrimidin-4-yl dimethylcarbamate.     

Arterial oxygen desaturation during non-sedated diagnostic upper gastrointestinal endoscopy

We studied oxygen saturation (SaO2) using a pulse oximeter in 120 patients undergoing non-sedated diagnostic upper gastrointestinal endoscopy. The baseline SaO2 was 98.3 +/- 1.0%. During the procedure, absence of oxygen desaturation (SaO2 > or = 95%) was found in 56%, mild oxygen desaturation (95% > SaO2 > or = 90%) in 35%, and severe oxygen desaturation (SaO2 < 90%) in 9%. Age (p = 0.56), gender (p = 0.47), smoking (p = 0.35), hemoglobin level (p = 0.52), body mass index (p = 0.27), or total endoscopy time (p = 0.72) was not related to the degree of oxygen desaturation. These results suggest that oxygen desaturation is frequently observed during non-sedated diagnostic upper gastrointestinal endoscopy although severe oxygen desaturation, which may induce rare but serious cardiopulmonary events, is not common. Furthermore, we cannot predict in which patients desaturation will occur. We therefore recommend continuous monitoring of arterial oxygenation in all patients during the procedure.     

Temperature Dependence of Thermal Reflection Behavior of Al2O3–TiO2 Multilayer Thermal Energy Window Coating

An Al₂O₃–TiO₂ multilayer-coated sapphire thermal energy window coating has been fabricated using an ultra-high-speed vacuum sputtering method. Thermal reflection spectra of the coated material in the wavelength range from 1.43 to 3.33 μm are measured in ambient air at temperatures of 298, 773, and 1173 K. The result shows that the light reflectance of ∼70% is achieved using a layered structure and this performance continues up to 1173 K. Thermal reflection energy of the coated material at T =1173 K is estimated to be about three times higher than that of uncoated sapphire, suggesting the potential of this coating to control thermal radiation energy.     

An Application of Silica‐Based Monolithic Membrane Emulsification Technique for Easy and Efficient Preparation of Uniformly Sized Polymer Particles

Summary: Uniformly sized polymer particles were prepared by an emulsification and polymerization technique utilizing a silica monolithic membrane, namely the “silica monolithic membrane emulsification technique”. In this paper, we utilized silica monolithic membrane as a device for the preparation of uniformly sized polymer particles. A mixture of monomers, diluents and oil‐soluble initiator was emulsified into a continuous medium through the silica monolithic membrane and polymerized. The particles obtained had a higher size uniformity than that of particles prepared by previously reported membrane emulsification techniques, such as the Shirasu Porous Glass (SPG) emulsification technique. Through the silica monolithic membrane emulsification technique, we could prepare particles having availability as a possible packing material for solid‐phase extraction (SPE) and high performance liquid chromatography (HPLC).

SEM photograph of silica particles prepared through capillary plate membrane.     

Critical mass in the emergence of collective intelligence: a parallelized simulation of swarms in noisy environments

We extend an abstract agent-based swarming model based on the evolution of neural network controllers, to explore further the emergence of swarming. Our model is grounded in the ecological situation, in which agents can access some information from the environment about the resource location, but through a noisy channel. Swarming critically improves the efficiency of group foraging, by allowing agents to reach resource areas much more easily by correcting individual mistakes in group dynamics. As high levels of noise may make the emergence of collective behavior depend on a critical mass of agents, it is crucial to reach sufficient computing power to allow for the evolution of the whole set of dynamics in simulation. Since simulating neural controllers and information exchanges between agents are computationally intensive, to scale up simulations to model critical masses of individuals, the implementation requires careful optimization. We apply techniques from astrophysics known as treecodes to compute the signal propagation, and efficiently parallelize for multi-core architectures. Our results open up future research on signal-based emergent collective behavior as a valid collective strategy for uninformed search over a domain space.     

Effect of growth conditions of Lactobacillus gasseri OLL2809 on the immunostimulatory activity for production of interleukin-12 (p70) by murine splenocytes

Lactobacillus gasseri OLL2809, a probiotic lactic acid bacterium, strongly stimulates interleukin (IL)-12 (p70) production by murine splenocytes; therefore, it is expected to ameliorate allergic diseases. Although many studies have investigated characteristics of the immunostimulatory activity of probiotics, little is known about how bacterial growth conditions affect the activity. In this study, we investigated the effects of the growth conditions of L. gasseri OLL2809 on the stimulation of IL-12 (p70) production. L. gasseri OLL2809 was grown under various culture conditions including different cultivation periods, media, and culture pH, and IL-12 (p70) production by murine splenocytes stimulated with these bacterial cells was determined. The results revealed that IL-12 (p70) production (i) increased with the growth of the bacterial cells and was higher in stationary-phase cells than in logarithmic-phase cells; (ii) it was higher in the cells grown in acidic pH; and (iii) it decreased when the cells were incubated in a buffer at neutral pH prior to heat treatment. These observations indicated that stimulation of IL-12 (p70) production is affected by culture medium pH. In addition, the observations of a difference in the stimulation of IL-12 (p70) production by L. gasseri OLL2809 grown under various conditions are consistent with the characteristics of autolysis. Therefore, it was deduced that the integrity of the bacterial cells is necessary for the stimulatory effect on IL-12 (p70) production and that acidic pH and heat treatment contributed to the stimulation by inhibiting the activity of autolysins indigenous to the bacteria. Our result suggests that cultivation until the stationary phase under acidic pH is required for the effective production of probiotics with immunostimulatory activity.     

A Method for Systematic Assessment of Intrinsically Disordered Protein Regions by NMR

Intrinsically disordered proteins (IDPs) that lack stable conformations and are highly flexible have attracted the attention of biologists. Therefore, the development of a systematic method to identify polypeptide regions that are unstructured in solution is important. We have designed an “indirect/reflected” detection system for evaluating the physicochemical properties of IDPs using nuclear magnetic resonance (NMR). This approach employs a “chimeric membrane protein”-based method using the thermostable membrane protein PH0471. This protein contains two domains, a transmembrane helical region and a C-terminal OB (oligonucleotide/oligosaccharide binding)-fold domain (named NfeDC domain), connected by a flexible linker. NMR signals of the OB-fold domain of detergent-solubilized PH0471 are observed because of the flexibility of the linker region. In this study, the linker region was substituted with target IDPs. Fifty-three candidates were selected using the prediction tool POODLE and 35 expression vectors were constructed. Subsequently, we obtained ¹⁵N-labeled chimeric PH0471 proteins with 25 IDPs as linkers. The NMR spectra allowed us to classify IDPs into three categories: flexible, moderately flexible, and inflexible. The inflexible IDPs contain membrane-associating or aggregation-prone sequences. This is the first attempt to use an indirect/reflected NMR method to evaluate IDPs and can verify the predictions derived from our computational tools.