Attribute Allocation and Retrieval Scheme for Large-Scale Sensor Networks

Wireless sensor network is an emerging technology that enables remote monitoring of large geographical regions. In this paper, we address the problem of distributing attributes over such a large-scale sensor network so that the cost of data retrieval is minimized. The proposed scheme is a data-centric storage scheme where the attributes are distributed over the network depending on the correlations between them. The problem addressed here is similar to the Allocation Problem of distributed databases. In this paper, we have defined the Allocation Problem in the context of sensor networks and have proposed a scheme for finding a good distribution of attributes to the sensor network. We also propose an architecture for query processing given such a distribution of attributes. We analytically determine the conditions under which the proposed architecture is beneficial and present simulation results to demonstrate the same. To the best of our knowledge, this is the first attempt to determine an allocation of attributes over a sensor network based on the correlations between attributes.     

A comparative thermodynamic study of sorption systems: second law analysis

As a consequence of the phasing out of CFCs, sorption systems appear to be potential candidates to replace vapour compression systems. Amongst sorption systems there exists a choice between several systems, such as liquid absorption, solid adsorption and chemical reaction heat pumps. Nevertheless, few comparative studies between these systems have been undertaken so far. It is the aim of this paper to present such a study based on combined first and second law thermodynamical analysis of the different cycles. Simple entropy generation processes explain why the basic cycles for these systems yield performances much lower than the Carnot efficiency. The possibility of operating regenerative cycles with internal heat recovery and higher efficiencies has also been considered for typical common base conditions. Different entropy generation considerations have been visualised, such as thermal coupling (external/internal), non-uniform temperature component entropy production and other irreversible processes for the COP degradation in these systems. It is found that thermal coupling irreversibilities in solid sorption systems and other internal irreversibilities in liquid sorption systems with solution heat exchanger are dominant in the actual COP degradation with respect to the reversible Carnot COP.     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

Relationships between multiaxial stress states and internal fracture patterns in sphere-impacted silicon carbide

Internal fracture patterns developed in silicon carbide cylindrical targets as a result of dynamic indentation (63–500 m/s) by tungsten carbide spheres are defined. Microscopy of recovered and sectioned targets delineate into three regions, each associated with distinct cracking modes, i.e., shallow cone macrocracking at and near the impact surface, steep interior cone macrocracks that radiate into the target from the impact region and local grain-scale microcracking directly underneath the impact region. The observed fracture patterns are found to maintain a noticeable degree of self-similarity upto the impact velocity of 500 m/s. Linear elastic analysis of the full (surface and interior) stress field developed under static (Hertz) contact loading delineate the target into four regions, based on the number of principal stresses that are tensile (none, 1, 2 or all 3). A strong correlation is found between the principal stress conditions within each region and the forms of cracking, their locations and orientations present therein. This correlation has a number of implications, including non-interaction of crack systems, which are discussed. Illustrative linear elastic fracture mechanics analyses are performed for three regions, and calculated and observed macrocrack lengths are found to be in reasonable agreement.     

Evaluation of solid-desiccant-based evaporative cooling cycles for typical hot and humid climates

This paper presents an evaluation of various solid desiccant cycles for air conditioning in hot and humid climates. Psychometric evaluation of potential cycles for 16 typical Indian cities has been carried out with the objective of achieving standard comfort conditions in the room. Computer simulation is based on constant effectiveness of heat exchangers and evaporative coolers and actual performance data of a commercially available desiccant wheel dehumidifier. The influence of various outdoor conditions, the effectiveness of heat exchangers/evaporative coolers on the cooling coefficient of performance and volumetric air flowrate per unit cooling capacity have been investigated. It is found that amongst ventilation, recirculation and Dunkle cycles, the Dunkle cycle is better for a wide range of outdoor conditions. However, cycles using wet surface heat exchangers give even higher performance.     

Oxidation of some aliphatic polyols on anodically deposited MnO2

Galvanostatic steady state current potential measurements were carried out for oxidation of a series of aliphatic alcohols having varying number of hydroxyl groups. The anodically deposited layer of MnO₂ on platinum was used as the electrode material. The deposit was characterised by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX) and electrode potential measurements. The catalytic role of MnO₂ in the electro-oxidation of alcohols was indicated by the chronopotentiograms and the cyclic voltammograms. An analysis of the electrochemical data indicated a catalytic EC mechanism in which Mn (V) is generated electrochemically and consumed chemically in succession. Based on this and the hydrogen bonding interaction between alcoholic hydroxyl groups and MnO₂ layer, a mechanism was proposed which accounts for the variation in the observed electrochemical reaction orders. Tafel behaviour was found to be followed only approximately. Current efficiency of the electrochemical oxidation of polyols was studied. Replacement of platinum by carbon as current collector was found to leave the electrocatalytic activity of the MnO₂ deposit practically unaltered.     

Terahertz Interferometer That Senses Vibrations Behind Barriers

A terahertz sensor that measures vibrations behind optically opaque barriers (cardboard, plastic, wool, cotton) is described and demonstrated. Using interferometric techniques, submicrometer displacements can be resolved. Measured spectral response agrees with commercial vibrometer     

Proadrenomedullin N-terminal 20 peptide: minimal active region to regulate nicotinic receptors

Proadrenomedullin N-terminal 20 peptide (PAMP-[1-20]; ARLDVASEFRKKWNKWALSR-amide) is a potent hypotensive and catecholamine release-inhibitory peptide released from chromaffin cells. We studied the mechanism of PAMP action and how its function is linked to structure. We tested human PAMP-[1-20] on catecholamine secretion in PC12 pheochromocytoma cells and found it to be a potent, dose-dependent (IC50 approximately 350 nmol/L) secretory inhibitor. Inhibition was specific for nicotinic cholinergic stimulation since PAMP-[1-20] failed to inhibit release by agents that bypass the nicotinic receptor. Nicotinic cationic (22Na+,45Ca2+) signal transduction was disrupted by this peptide, and potencies for inhibition of 22Na+ uptake and catecholamine secretion were comparable. Even high-dose nicotine failed to overcome the inhibition, suggesting noncompetitive nicotinic antagonism. N- and C-terminal PAMP truncation peptides indicated a role for the C-terminal amide and refined the minimal active region to the C-terminal 8 amino acids (WNKWALSR-amide), a region likely to be alpha-helical. PAMP also blocked (EC50 approximately 270 nmol/L) nicotinic cholinergic agonist desensitization of catecholamine release, as well as desensitization of nicotinic signal transduction (22Na+ uptake). Thus, PAMP may exert both inhibitory and facilitatory effects on nicotinic signaling, depending on the prior state of nicotinic stimulation. PAMP may therefore contribute to a novel, autocrine, homeostatic (negative-feedback) mechanism controlling catecholamine release.     

Synergistic Effect of PVDF-Coated PCL-TCP Scaffolds and Pulsed Electromagnetic Field on Osteogenesis

Bone exhibits piezoelectric properties. Thus, electrical stimulations such as pulsed electromagnetic fields (PEMFs) and stimuli-responsive piezoelectric properties of scaffolds have been investigated separately to evaluate their efficacy in supporting osteogenesis. However, current understanding of cells responding under the combined influence of PEMF and piezoelectric properties in scaffolds is still lacking. Therefore, in this study, we fabricated piezoelectric scaffolds by functionalization of polycaprolactone-tricalcium phosphate (PCL-TCP) films with a polyvinylidene fluoride (PVDF) coating that is self-polarized by a modified breath-figure technique. The osteoinductive properties of these PVDF-coated PCL-TCP films on MC3T3-E1 cells were studied under the stimulation of PEMF. Piezoelectric and ferroelectric characterization demonstrated that scaffolds with piezoelectric coefficient d₃₃ = −1.2 pC/N were obtained at a powder dissolution temperature of 100 °C and coating relative humidity (RH) of 56%. DNA quantification showed that cell proliferation was significantly enhanced by PEMF as low as 0.6 mT and 50 Hz. Hydroxyapatite staining showed that cell mineralization was significantly enhanced by incorporation of PVDF coating. Gene expression study showed that the combination of PEMF and PVDF coating promoted late osteogenic gene expression marker most significantly. Collectively, our results suggest that the synergistic effects of PEMF and piezoelectric scaffolds on osteogenesis provide a promising alternative strategy for electrically augmented osteoinduction. The piezoelectric response of PVDF by PEMF, which could provide mechanical strain, is particularly interesting as it could deliver local mechanical stimulation to osteogenic cells using PEMF.