Tribological Performance of UHMWPE/GNPs Nanocomposite Coatings for Solid Lubrication in Bearing Applications

Ultra-high molecular weight polyethylene (UHMWPE)/ graphene nanoplatelets (GNPs) nanocomposite coatings were developed to reduce friction and wear in the absence of liquid lubrication. UHMWPE nanocomposite powders with different loadings (0.25, 1, and 2 wt.%) of GNPs were prepared and electrostatic spraying technique was then used to deposit the nanocomposite powders on aluminum alloy to form a thin coating. Friction and wear tests were conducted on the coatings against a flat-end pin, made of hardened tool steel to determine the best loading of GNPs. That was further tested to investigate the effect of sliding speed and contact pressure on its tribological properties and to establish coating operating limits. Results showed that UHMWPE nanocomposite coating reinforced with 1 wt.% GNPs showed the best tribological performance. It reduced wear rate by about 51% as compared to the pristine UHMWPE coating. The coating sustained a maximum sliding speed of 1 m/s at a contact pressure of 4 MPa equivalent to a pressure and velocity (PV) value of 4 MPa.m/s.     

Biobased composites prepared by compression molding with a novel thermoset resin from soybean oil and a natural‐fiber reinforcement

Biobased composites were manufactured with a compression‐molding technique. Novel thermoset resins from soybean oil were used as a matrix, and flax fibers were used as reinforcements. The air‐laid fibers were stacked randomly, the woven fabrics were stacked crosswise (0/90°), and impregnation was performed manually. The fiber/resin ratio was 60 : 40. The prepared biobased composites were characterized by impact and flexural testing. Scanning electron microscopy of knife‐cut cross sections of the specimens was also done to investigate the fiber–matrix interface. Thermogravimetric analysis of the composites was carried out to provide indications of thermal stability. Three resins from soybean oil [methacrylated soybean oil, methacrylic anhydride modified soybean oil (MMSO), and acetic anhydride modified soybean oil] were used as matrices. The impact strength of the composites with MMSO resin reinforced with air‐laid flax fibers was 24 kJ/m², whereas that of the MMSO resin reinforced with woven flax fabric was between 24 and 29 kJ/m². The flexural strength of the MMSO resin reinforced with air‐laid flax fibers was between 83 and 118 MPa, and the flexural modulus was between 4 and 6 GPa, whereas the flexural strength of the MMSO resin reinforced with woven fabric was between 90 and 110 MPa, and the flexural modulus was between 4.87 and 6.1 GPa. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Photoelastic analysis of practical mode I fracture test specimens

A photoelastic technique for the evaluation of the isochromatic fringe patterns of practical Mode I fracture test specimen is presented.The new procedure uncouples the expressions for the stress intensity factor $\text{K}$ and the non-singular stress term $\text{A}$ from the governing maximum shear expression by employing a line perpendicular to the crack-tip in a photoelastic specimen, (this line intersects the isochromatic fringes at the locus of points $\text{r}{}_{\mathrm{i}}$, $\text{θ}{}_{\mathrm{i}}\text{= π/2}$, $\text{i = 1,2,…, n}$, where $\text{n}$ is the maximum analizable fringe) in developing the least-squares technique employed in this research.The least-squares expressions developed required no assumption of initial values for the stress intensity factor $\text{K}$ and the non-singular stress term $\text{A}$. The accuracy of the approach is then demonstrated by obtaining the $\text{K}$ and $\text{A}$ values of some practical Mode I specimens under applied uniaxial and biaxial stresses.     

DFTMicroagg: a dual-level anonymization algorithm for smart grid data

International Journal of Information Security - The introduction of advanced metering infrastructure (AMI) smart meters has given rise to fine-grained electricity usage data at different levels of...     

Prediction of structural response to blast –induced vibration in Kopek Construction Quarry,Ikere – Ekiti,Ekiti State,Nigeria

The responses of adjoining structures to blast induced ground vibrations emanating from Kopek Construction Quarry, Ikere – Ekiti in Ekiti State were evaluated and predicted. Five off site receptors at predetermined distances from the blast source were chosen and the Peak Particle Velocity (PPV) at each receptor during blasting was estimated using the squared root scaled distance equation. The estimated PPVs were compared with the USBM – RI 8705 reference. The results showed that the blast induced vibrations from the quarry site were within the recommended limits and were insignificant to warrant concerns of causing structural damages to buildings in proximity to the quarry site with the given blast design parameters.     

Functional and tableting properties of acetylated and oxidised finger millet (Eleusine coracana) starch

The functional and tableting properties of native (NaFM) and chemically modified (by acetylation, AcFM; and oxidation, OxFM) finger millet starches were investigated. The tablet formation properties of the starches were assessed by Heckel and Kawakita analysis. The swelling power and solubility of the starch increased with increase in temperature with AcFM having the highest swelling power, while OxFM had the highest solubility. X‐ray diffractometry showed that the starches had the characteristic ‘A’ pattern with strong peaks at 3.78, 4.37, 4.87, and 5.17 Å. Chemical modification causes rupture of some starch granules as revealed by the Scanning Electron Micrograph. Chemical modification also leads to improved gelatinisation profile, with reduction in ΔH_gel from 9.64 J/g (NaFM) to 3.88 J/g (AcFM) and 8.76 J/g (OxFM). The bulk density and Hausner's ratio increased after chemical modification of the starch. Chemical modification reduced the mean yield pressure, P_y (Heckel analysis) but increased the deformability P_k (Kawakita analysis) of the starch compacts. Chemical modification also increased the crushing and tensile strength of the starch compacts, but lowered its disintegration time and friability.     

Pasting,Thermal, Hydration,and Functional Properties of Annealed and Heat-Moisture Treated Starch of Sword Bean (Canavalia gladiata)

The effects of annealing (ANN) and heat-moisture treatments (HMT) on the physicochemical and functional properties of Sword bean starches were investigated. The pasting properties differ significantly among the starches, with peak viscosity ranging from 399.17 RVU to 438.33 RVU; however, all the starches exhibited ‘Type C’ class with restricted swelling. The HMT starches had the highest gelatinization temperature, while change in enthalpy of gelatinization, ΔH_gel of the native starch, was higher (13.82 J/g) than that of the modified starches (1.39–6.74 J/g). The solubility and swelling power of all the starches increased as the temperature increased. The oil and water absorption capacity of the starches ranges between 3.24–3.91 g/g and 2.42–3.35 g/g, respectively. HMT (at 25 and 30% moisture level) changes the X-ray diffraction pattern of the starch from Type ‘B’ to Type ‘C’. The Scanning electron micrograph results revealed the starch granules with smooth ellipsoids and indentation in their centre, hydrothermal modification showed little effect on the morphology and size of the granules. Hydrothermal modification improved the physicochemical and functional properties of the starch without destroying the granule of the starch.     

Twitter spam account detection based on clustering and classification methods

The Journal of Supercomputing - Twitter social network has gained more popularity due to the increase in social activities of registered users. Twitter performs dual functions of online social...