Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Excessive closure of the right eye: a new sign of infarction in the territory of the ipsilateral right middle cerebral artery

In right middle cerebral territory infarction a new sign, excessive closure of the right eye ipsilateral to the lesion and mild closure of the left eye on command, was noted. The excessive ipsilateral eye closure was not observed on spontaneous eye closure.     

Patients with ultrasonic coarse-nodular cirrhosis who are anti-hepatitis C virus-positive are at high risk for hepatocellular carcinoma

BACKGROUND: The relationship between echosonographic patterns of patients with cirrhosis who are antihepatitis C virus (HCV)-positive, the DNA synthesis of hepatocytes, and the risk for HCC were studied. METHODS: Thirty-eight patients with anti-C-100 antibody-positive and Child's grade A posthepatitic cirrhosis were studied. DNA synthesis activity was measured by a bromodeoxyuridine (BrdU, a thymidine analogue)-labeling index (LI), using the BrdU-anti-BrdU in vitro method, and the patients were followed prospectively by frequent liver ultrasonography for 3 years. The ultrasound patterns were classified into fine, coarse, and coarse-nodular (CN) patterns, and the reproducibility of the classification in practical use also was confirmed. RESULTS: Of the 21 patients with high DNA synthesizing cirrhosis (BrdU LI > or = 1.5%), 10 (48%) showed coarse-nodular, 5 (24%) coarse, and 6 (29%) fine pattern in ultrasonography. Conversely, of the 17 patients with low DNA synthesizing LC (BrdU LI < 1.5%), only 1 (6%) showed coarse-nodular, 2 (12%) coarse, and 14 (82%) fine pattern. A significant relationship was found between the two groups of BrdU LI and ultrasound imaging patterns (P < 0.05). The incidence of CN pattern was significantly higher (P < 0.01) in the high DNA synthesizing group than in low DNA synthesizing group. Of the 11 patients with CN pattern by ultrasound imaging, 10 (91%) were in the high DNA synthesizing group, and 9 (82%) developed HCC during the follow-up period, compared with 3 of 7 (43%) with coarse, and only one of 20 (5%) with fine pattern developed HCC. The incidence of HCC was significantly higher (P < 0.01) in patients with a CN cirrhosis pattern than in those with a fine pattern. CONCLUSIONS: In patients with cirrhosis who are anti-HCV-positive, the CN pattern by ultrasound imaging indicates increased DNA synthesis of hepatocytes and a high risk for developing HCC.     

Endoscopic treatment of vesicoureteral reflux in patients with myelodysplasia

PURPOSE: We assessed the usefulness of and indications for endoscopic treatment of vesicoureteral reflux in myelodysplasia patients. MATERIALS AND METHODS: A total of 26 patients treated with intermittent catheterization was divided into 11 (16 ureters) with and 15 without vesicoureteral reflux. In 9 patients (13 ureters) endoscopic correction was performed with 3% atelo-collagen and without anesthesia at the outpatient clinic. In each ureter we obtained the sum of scores for 4 risk factors for upper urinary tract deterioration: bladder compliance less than 10 ml./cm. water, grade 2 to 3 bladder deformity, detrusor-sphincter dyssynergia and urethral closure pressure 50 cm. water or greater. RESULTS: No reflux was demonstrated immediately after the initial collagen injection but cystography 3 to 6 months later showed recurrent reflux in 5 ureters (38%). Repeat injection cured the reflux, with results persisting for an average of 17 months. Mean risk factor score for patients without vesicoureteral reflux was significantly lower than that for patients with reflux. In patients treated with intermittent catheterization and anticholinergic agents the mean score for ureters with an increased or unchanged reflux grade was significantly greater than for those with a decreased grade. CONCLUSIONS: Endoscopic treatment of reflux appears to be safe and useful in patients with myelodysplasia. The treatment is preferable in those with high risk factor scores due to the possibility of increased reflux grade in such patients.     

Adsorption of urea,creatinine, and uric acid from three solution types using spherical activated carbon and its recyclability

In this paper, we propose that the urinary toxins from the wastewater be adsorbed on an adsorbent such as spherical activated carbon and the latter be regenerated by subjecting it to high temperatures to recycle activated carbon and also to recycle the water used in dialysis. We studied the adsorption of artificial waste dialysate, which is a mixed solution of urea, creatinine, and uric acid, and the separate solutions for each of these and found that their extents of adsorption onto the spherical activated carbon material were nearly identical. The amount of adsorption was approximately 1.4 mg·g^-1 for urea, 18 mg·g^-1 for creatinine, and 20 mg·g^-1 for uric acid. The urea, creatinine, and uric acid adsorbed onto the spherical activated carbon decomposed on heat treatment at 500℃, and the adsorption capacity of the spherical activated carbon was regenerated. Our study successfully demonstrated that the spherical activated carbon can be recycled in the waste dialysate treatment process.     

Effect of platelet-activating factor on lipoprotein lipase and blood lipids

We investigated the effect of platelet-activating factor (PAF) and of the PAF specific antagonist CV-6209 on plasma lipid metabolism, and particularly on post-heparin plasma lipolytic activity in male Wistar rats. Lipoprotein lipase (LPL) activity was enhanced by intravenous injection of PAF before intravenous injection of heparin when the PAF dose was low (0.2 μg/kg). PAF activated hepatic triacylglycerol lipase (HTGL) activity dose-dependently. Plasma triacylglycerols (TG) significantly decreased with the activation of LPL and/or HTGL. Plasma total cholesterol (TC) and phospholipid (PL) levels decreased at a low dose of PAF (0.2 μg/kg), but increased when higher doses were used. The PAF antagonist CV-6209 partially reversed the PAF induced effects on HTGL, TC and PL. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Influence of ammonium salt on electrowinning of copper from ammoniacal alkaline solutions

In order to develop an energy-saving copper recycling process from wastes, electrochemical measurements were conducted in ammoniacal alkaline solutions containing Cu(I) ions and an ammonium salt of sulfate, chloride or nitrate. The results of each system were then compared. The polarization measurements suggested that the voltage required for the electrode process is lower in the chloride and nitrate systems than that in the sulfate system. The cathode current efficiency during the copper electrodeposition varied from 39 to 97% and increased with current density in the chloride and sulfate systems. In the nitrate system, the lowest cathode current efficiency of 30% was observed because of nitrate ion reduction. Based on these results, the power consumption required for the electrowinning stage of the copper recycling process was calculated. Among these three systems, the chloride system showed the lowest power consumption of 500 kWh t⁻¹ at the current density of 200 A m⁻², which is about 25% of the conventional copper electrowinning process from a copper sulfate-sulfuric acid solution.     

Some characteristics of a sparged agitated vessel under foaming — Mechanical control of foaming —

Foam-breaking with a rotating disk mechanical foam-breaker (MFRD) was studied for a foaming system containing a diluted detergent solution in a laboratory sparged agitated vessel. The change of the foam-breaking capacity of the MFRD by varying the air sparge rate, the working volume and the impeller speed or the disk diameter was measured. Based on these measurements, empirical equations are presented for predicting the critical foam-breaking regions of the MFRD fitted with the agitated vessel. The operational range where foam-breaking with the MFRD can be carried out effectively and economically is also discussed.     

Changes in liquid hold-up in foam and size of foam by perforated plates and contribution to mechanical foam-breaking

Changes in the liquid hold-up, ?, and the diameter of d, of a foam that are induced by perforated plates (PPs) and the contribution of PPs to foam-breaking were studied. A foaming system containing a dilute detergent solution in a column with mechanical agitation fitted with a rotating-disk foam-breaker (MFRD) was used. After the foam passed through the PPs, ? and d decreased and increased, respectively. The use of PPs to achieve a maximum reduction in ? and a maximum increase in d is confirmed. It is also demonstrated that use of PPs contributes not only to improving the foam-breaking performance of the MFRD, but also to power savings.