M16C/62P在液晶电视制造中的应用

本文介绍M16C平台在先进的数字液晶电视技术以及硬件配置和软件算法方面的作用，同时也将讨论其他的LSI。此外，也为电视制造商用于26英寸或以上液晶电视提供主要解决方案。     

Assessment of different techniques for quantification of α-Al(FeMn)Si and β-AlFeSi intermetallics in AA 6xxx alloys

During homogenisation of AA 6xxx aluminium alloys, the platelike β-AlFeSi intermetallic phase will transform to a less Si-rich and more spheroidised α-Al(FeMn)Si phase which is more favourable for extrusion. In this study, several quantitative methods, which determine the relative volume fraction of α-Al(FeMn)Si and β-AlFeSi, are compared and an assessment of each method is made. The methods used are optical microscopy, scanning electron microscopy (SEM) in combination with electron dispersive X-ray (EDX) using polished samples, and X-ray diffraction (XRD) on intermetallics, extracted through selective dissolution of the Al matrix. The highest accuracy is obtained by using SEM/EDX analysis and applying two criteria.     

Cytological Observations and Bulked-Segregant Analysis Coupled Global Genome Sequencing Reveal Two Genes Associated with Pollen Fertility in Tetraploid Rice

Neo-tetraploid rice with high fertility is a useful germplasm for polyploid rice breeding, which was developed from the crossing of different autotetraploid rice lines. However, little information is available on the molecular mechanism underlying the fertility of neo-tetraploid rice. Here, two contrasting populations of tetraploid rice, including one with high fertility (hereafter referred to as JG) and another with low fertility (hereafter referred to as JD), were generated by crossing Huaduo 3 (H3), a high fertility neo-tetraploid rice that was developed by crossing Jackson-4x with 96025-4x, and Huajingxian74-4x (T452), a low fertility autotetraploid rice parent. Cytological, global genome sequencing-based bulked-segregant (BSA-seq) and CRISPR/Cas9 technology were employed to study the genes associated with pollen fertility in neo-tetraploid rice. The embryo sacs of JG and JD lines were normal; however, pollen fertility was low in JD, which led to scarce fertilization and low seed setting. Cytological observations displayed low pollen fertility (25.1%) and approximately 31.3 and 27.2% chromosome lagging at metaphase I and II, and 28.8 and 24.8% chromosome straggling at anaphase I and II in JD, respectively. BSA-seq of F_2–3 generations and RNA-seq of F₄ generation detected a common fragment, i.e., 18,915,234–19,500,000, at chromosome 7, which was comprised of 78 genes associated with fertility. Among 78 genes, 9 genes had been known to be involved in meiosis and pollen development. Two mutants ny1 (LOC_Os07g32406) and ny2 (LOC_Os07g32040) were generated by CRISPR/Cas9 knockout in neo-tetraploid rice, and which exhibited low pollen fertility and abnormal chromosome behavior. Our study revealed that two unknown genes, LOC_Os07g32406 (NY1) and LOC_Os07g32040 (NY2) play an important role in pollen development of neo-tetraploid rice and provides a new perspective about the genetic mechanisms of fertility in polyploid rice.     

Interspecies Behavioral Variability of Medaka Fish Assessed by Comparative Phenomics

Recently, medaka has been used as a model organism in various research fields. However, even though it possesses several advantages over zebrafish, fewer studies were done in medaka compared to zebrafish, especially with regard to its behavior. Thus, to provide more information regarding its behavior and to demonstrate the behavioral differences between several species of medaka, we compared the behavioral performance and biomarker expression in the brain between four medaka fishes, Oryzias latipes, Oryzias dancena, Oryzias woworae, and Oryzias sinensis. We found that each medaka species explicitly exhibited different behaviors to each other, which might be related to the different basal levels of several biomarkers. Furthermore, by phenomics and genomic-based clustering, the differences between these medaka fishes were further investigated. Here, the phenomic-based clustering was based on the behavior results, while the genomic-based clustering was based on the sequence of the nd2 gene. As we expected, both clusterings showed some resemblances to each other in terms of the interspecies relationship between medaka and zebrafish. However, this similarity was not displayed by both clusterings in the medaka interspecies comparisons. Therefore, these results suggest a re-interpretation of several prior studies in comparative biology. We hope that these results contribute to the growing database of medaka fish phenotypes and provide one of the foundations for future phenomics studies of medaka fish.     

Bench-scale continuous hydrogenation of Australian coals — study of iron catalysts and recycle solvent composition

The inter-relations between iron catalysts, recycle solvent composition and product yield and composition have been investigated in bench-scale (1–2 kg h^?1) continuous hydrogenation of Australian coals at process severity of 21–22 MPa at 400–430°C. Products and recycle solvent are recovered in batch distillation (atmospheric and vacuum) and the distillate solvent is returned to slurry feed without further treatment. Successive samples of recycle solvent are analysed by g.c.-m.s., i.r. and titrimetry. The effect of adding iron catalysts in the form of red mud - sulphur mixtures or compounds after a short period of continuous operation without catalyst is demonstrated. Distillate yields from black coals increase from 24–34 wt% daf under non-catalytic conditions to 35–53 wt% daf by adding iron catalysts. The composition of the almost equilibrated recycle solvent also changes and a new equilibrium is approached after the iron catalyst is added. The effect of solvent composition on distillate yield can not be determined from these data. The ratio of hydroaromatic components to hydroaromatic plus aromatic components in the solvent increases from ≈0.2 at non-catalytic equilibrium to ≈0.5–0.6 at catalysed equilibrium after adding iron. Other compositional parameters in the recycle solvent do not show any clear responses to the addition of iron. Equilibrium solvent composition under constant operating conditions is attained at ≈10 passes at 1 kg ^h?1 throughput with total system holdup of ≈20 kg. Paraffins for the Queensland subbituminous coal equilibrated at 18–24% in the solvent, phenolics at 16–21%, basic nitrogen at ≈0.4% (as N), and the balance a mixture of aromatics and hydroaromatics. The total aromatics neglecting phenolics in the equilibrium recycle solvent consists of ≈40–50% each of two-and three-ring and 5–10% four-ring members.     

A survey on enhanced subspace clustering

Subspace clustering finds sets of objects that are homogeneous in subspaces of high-dimensional datasets, and has been successfully applied in many domains. In recent years, a new breed of subspace clustering algorithms, which we denote as enhanced subspace clustering algorithms, have been proposed to (1) handle the increasing abundance and complexity of data and to (2) improve the clustering results. In this survey, we present these enhanced approaches to subspace clustering by discussing the problems they are solving, their cluster definitions and algorithms. Besides enhanced subspace clustering, we also present the basic subspace clustering and the related works in high-dimensional clustering.     

Overcoming challenges in the study of nitrided microalloyed steels using atom probe

Nitrided steels are widely used in the engineering field due to their superior hardness and other attractive properties. Atom probe tomography (APT) was employed to study two Nb-microalloyed CASTRIP steels with different N contents. A major challenge of using APT to study this group of materials is the presence of tails after Fe peaks in the mass spectra, which overestimates the composition for alloying elements such as Nb and Cu in the steels. One important factor that contributes to the tails is believed to be delayed field evaporation from Fe²⁺. This artefact of the mass spectrum was observed to be the most severe when voltage pulsing was used. The application of laser pulses with energy ranging from 0.2 to 1.2 nJ successfully reduced the tails and lead to better compositional measurement accuracy. Spatial resolution in the z-direction (along the tip direction) was observed to be less affected by changing laser energy but deteriorates in x-y direction with increasing laser energy. This investigation suggests that pulsed-laser atom probe with ∼0.4 nJ laser energy can be used to study this group of materials with improved mass resolution while still maintaining high spatial resolution.     

Methanol Conversion to Hydrocarbons (MTH) Over H-ITQ-13 (ITH) Zeolite

Product flexibility is key to meeting fluctuating chemicals demands in the future. In this contribution, the methanol to hydrocarbons (MTH) reaction was investigated over two Ge-containing H-ITQ-13 samples, one with needle-like (H-ITQ-13(N), with (Si+Ge)/Al) = 42) and another with plate-like (H-ITQ-13(P), with (Si+Ge)/Al > 100) morphology. The samples were characterised using XRD, BET, SEM/EDS and FTIR spectroscopy, and their MTH performance was compared with the performance of H-ZSM-5 and H-ZSM-22. Similar specific surface areas (413 and 455 m² g^?1 for H-ITQ-13(N) and (P), respectively) and similar acid strength (Δν ~ ?327(?310) cm^?1) was observed for the two H-ITQ-13 samples. Testing of H-ITQ-13(N) at weight hourly space velocity (WHSV) = 2–8 h^?1 at 350–450 °C revealed that C₅₊ alkenes were the main products (35–45 % selectivity at 400 °C), followed by propene and butene. A low but significant selectivity for aromatic products was observed (6–8 % selectivity at 400 °C). Product selectivity was found to be independent of deactivation. The methanol conversion capacity of H-ITQ-13(N) was 120–150 g methanol g^?1 catalyst at 400 °C. Testing H-ITQ-13 at high (30 atm) and ambient pressure, respectively, at 350 °C showed that a high pressure led to enhanced C₅₊ selectivity, but close to a tenfold decrease in methanol conversion capacity. H-ITQ-13(P) was tested at 400 °C and 2 h^?1. It gave lower conversion than H-ITQ-13(N). Furthermore, when compared at the same conversion level, H-ITQ-13(P) gave higher C₅₊ alkene selectivity, lower aromatics selectivity, and a higher propene to ethene ratio than H-ITQ-13(N). The H-ITQ-13 samples yielded a product spectrum intermediate of H-ZSM-22 and H-ZSM-5. The effluent product cut-off of H-ITQ-13 was similar to that of H-ZSM-5 with tetramethylbenzene as the largest significant product, while H-ZSM-22 produced mainly linear and branched alkenes. The lifetime of H-ITQ-13(N) was clearly enhanced compared to H-ZSM-22, but inferior to H-ZSM-5.