Theoretical estimation of dielectric loss of oxide glasses using nonequilibrium molecular dynamics simulations

To theoretically explore amorphous materials with a sufficiently low dielectric loss, which are essential for next-generation communication devices, the applicability of a nonequilibrium molecular dynamics simulation employing an external alternating electric field was examined using alkaline silicate glass models. In this method, the dielectric loss is directly evaluated as the phase shift of the dipole moment from the applied electric field. This method enabled us to evaluate the dielectric loss in a wide frequency range from 1 GHz to 10 THz. It was observed that the dielectric loss reaches its maximum at a few THz. The simulation method was found to qualitatively reproduce the effects of alkaline content and alkaline type on the dielectric loss. Furthermore, it reasonably reproduced the effect of mixed alkalines on the dielectric loss, which was observed in our experiments on sodium and/or potassium silicate glasses. Alkaline mixing was thus found to reduce the dielectric loss.     

An optically clocked transistor array with dual serial-to-parallel and parallel-to-serial conversion capability for optical label swapping

We propose an optically clocked transistor array optoelectronic integrated circuit (OEIC) for both serial-to-parallel and parallel-to-serial conversion (demux/mux), enabling an interface between high-speed asynchronous burst optical labels and CMOS circuitry for optical label swapping. Dual functionality of the OEIC reduces size, power, and cost of the optical label swapper. The capability for greater than 20-Gb/s conversion operation is demonstrated.     

Photoresponsive peptide and polypeptide systems: part II. Photochromism of poly(l-ornithine) containing various azo-contents in side chains

Poly(L-ornithine)s having various azo-contents in the side chains were synthesized by the water-soluble carbodiimide procedure. The photochemical properties of the polypeptides poly[N^δ-p-(phenylazo)benzoyl-L-ornithine] (PPABLO) containing 3–77 mol% azobenzene were investigated by absorption and circular dichroism spectroscopy in hexafluoro-2-propanol (HFIP) or water, and in HFIP-water or methanol-water solvent mixtures. The photochromism of the dichroic bands of the PPABLOs containing 20–77 mol% azobenzene in the visible and ultraviolet wavelength regions was found to be mostly reversible as a function of irradiation time at different wavelengths due to the photostationary state (above 80% trans-cis photoisomerization) of the azo aromatic moieties. The PPABLO containing 3.2 mol% azobenzene in water exhibited conformational changes from random coil to helix by the addition of methanol or sodium dodecyl sulphate (SDS). The photo-induced conformational change was observed in HFIP-water-SDS solvent mixtures, while no conformational change was seen in water and HFIP-water solvent mixtures.     

Recovery retardation in equal channel angular pressed Al–Zr alloy during friction stir welding

The effect of Zr on reduction of hardness and microstructure in an FS weld of equal channel angular-pressed Al alloy was investigated. Zr addition to Al suppressed dynamic recovery in the thermomechanically affected zone and enabled retention of the high hardness of the ECA-pressed material throughout the weld.     

A Web Server for Designing Molecular Switches Composed of Two Interacting RNAs

The programmability of RNA–RNA interactions through intermolecular base-pairing has been successfully exploited to design a variety of RNA devices that artificially regulate gene expression. An in silico design for interacting structured RNA sequences that satisfies multiple design criteria becomes a complex multi-objective problem. Although multi-objective optimization is a powerful technique that explores a vast solution space without empirical weights between design objectives, to date, no web service for multi-objective design of RNA switches that utilizes RNA–RNA interaction has been proposed. We developed a web server, which is based on a multi-objective design algorithm called MODENA, to design two interacting RNAs that form a complex in silico. By predicting the secondary structures with RactIP during the design process, we can design RNAs that form a joint secondary structure with an external pseudoknot. The energy barrier upon the complex formation is modeled by an interaction seed that is optimized in the design algorithm. We benchmarked the RNA switch design approaches (MODENA+RactIP and MODENA+RNAcofold) for the target structures based on natural RNA-RNA interactions. As a result, MODENA+RactIP showed high design performance for the benchmark datasets.     

Sesamin is a potent and specific inhibitor of Δ5 desaturase in polyunsaturated fatty acid biosynthesis

Incubation with sesame oil increases the mycelial dihomo-γ-linolenic acid content of an arachidonic acid-producing fungus,Mortierella alpina, but decreases its arachidonic acid content [Shimizu, S., K. Akimoto, H. Kawashima, Y. Shinmen and H. Yamada (1989)J. Am. Oil Chem. Soc. 66, 237–241]. The factor causing these effects was isolated and identified to be (+)-sesamin. The results obtained in experiments with both a cell-free extract of the fungus and with rat liver microsomes demonstrated that (+)-sesamin specifically inhibits Δ5 desaturase at low concentrations, but does not inhibit Δ6, Δ9 and Δ12 desaturases. Kinetic analysis showed that (+)-sesamin is a noncompetitive inhibitor (K_i for rat liver Δ5 desaturase, 155 μM). (+)-Sesamolin, (+)-sesaminol and (+)-episesamin, also inhibited only Δ5 desaturases of the fungus and liver. These results demonstrate that (+)-sesamin and related lignan compounds present in sesame seeds or its oil are specific inhibitors of Δ5 desaturase in polyunsaturated fatty acid biosynthesis in both microorganisms and animals. On leave from Suntory Ltd.     

Production of dihomo-γ-linolenic acid byMortierella alpina 1S-4

The mycelial dihomo-γ-linolenic acid content of an arachidonic acid-producing fungus,Mortierella alpina 1S-4, was found to increase, with an accompanying marked decrease in its arachidonic acid content, on cultivation with sesame oil. The resultant mycelia were found to be a rich source of dihomo-γ-linolenic acid. This unique phenomenon was suggested to be due to specific repression of the conversion of dihomo-γ-linolenic acid to arachidonic acid by the oil. After fractionation of the oil with acetone into oil and non-oil fractions, it was found that the effective factor(s) was present in the non-oil fraction. In a study on optimization of the culture conditions for the production of dihomo-γ-linolenic acid byM. alpina 1S-4, a medium containing glucose, yeast extract and the non-oil fraction was found to be suitable for the production. Under the optimal conditions in a 50-1 fermentor, the fungus produced 107 mg of dihomo-γ-linolenic acid/g dry mycelia (2.17 g/l of culture broth). This value accounted for 23.1% of the total fatty acids in the lipids extracted from the mycelia. The mycelia were also rich in arachidonic acid (53.5 mg/g dry mycelia, 11.2%). Other major fatty acids in the lipids were palmitic acid (24.1%), stearic acid (7.0), oleic acid (20.1), linoleic acid (6.6) and γ-linolenic acid (4.1). On leave from Suntory Ltd.     

Cholesteryl ester compounds containing alkyl branched acyl groups — their preparations,properties and applications

Cholesterol having a reactive hydroxyl group at C₃-position can react with fatty acids to give the corresponding cholesteryl esters. Most of the natural cholesteryl esters consist of straight alkyl chain fatty acids with a high melting point. In oleochemistry it is well known that alkyl branched fatty acids, which are derived from petroleum or the fat and oil industry, have low melting points (mp.) and are chemically more stable if they are saturated acids. We designed alkyl branched fatty acid cholesteryl esters by means of common esterification and found some esters having a low mp. (mostly as a liquid). They had no irritative effect on both animal and human skin. They showed characteristic emulsification properties, namely the formation of either O/W or W/O emulsion coexistence together with other lipid components. Applying them onto human skin, they were able to penetrate towards the stratum corneum and improve the water-retaining ability and the barrier function of the stratum corneum. Based on these properties we have been applying the alkyl branched fatty acid cholesteryl ester, especially the methyl branched isostearic acid cholesteryl ester (IS-CE), to a shampoo and a rinse as hair cosmetics, skin care cosmetics and bath-additive products in the past decade.     

The motion capturing of female divers under water and the trial production of motion viewers for developing a virtual diving experience learning system

The virtual diving experience learning system of “Ama”, Japanese traditional female divers, has been developed to simulate how divers move in a virtual space using the diving interface and utilizing an accelerometer and a gyroscope. This interface not only detects the diving motion but also outputs the movement. Diving motion is shown in the ways of hand motion while standing. Although this makes it possible for a learner to understand the divers’ actions more clearly, this system’s difficulty is in visualizing a divers’ actions including their hands or bodies. Therefore, our study focuses on developing the operation system to reproduce actual ways of Amas’ diving with a virtual human body in a virtual space. First, the motion capture was done in an underwater condition. In the next process, the virtual human body was created. Finally, with the motion viewer, the more vivid actions of the Ama were successfully reproduced much more than in previous attempts. Using this system, the effectiveness of the Amas’ movement learning was confirmed, because a learner practices Amas’ movement.     

Route guidance by a car navigation system based on augmented reality

Car navigation systems play a prominent role in road traffic safety and traffic regulation. However, it is necessary to improve the route guidance of car navigation systems so that they accurately and quickly recognize small differences in location. Thus, to increase the ease of understanding and safety of car navigation systems, navigation systems based on augmented reality have been proposed for providing guidance at road intersections. We are currently developing a car navigation system based on augmented reality, called AR‐Navi. We investigated designs for the display of road intersection guidance that can be easily understood even when limited information is available and proposed a “best shot” display method that does not use moving images. In addition, we implemented a prototype system that includes these methods and conducted driving experiments on public roads to evaluate the ease of understanding and safety of AR‐Navi. Using the evaluation results, we confirmed that the ease of understanding and safety is similar in the case of AR‐Navi and CG‐Navi. We also clarified the characteristics of AR‐Navi. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(2): 43–54, 2012; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22278