Delaminations at the free edge of a composite laminate

The concept of a fracture process zone where damage takes place is used to analyse the delaminations at the free edges of angle ply laminates under uniaxial tension. The use of a fracture process zone removes the singularity in the interlaminar stresses and enables the initiation and growth of delaminations to be modelled for a perfect laminate without any assumed prior defects. Two different models for the stress displacement relationship in the fracture process zone are examined: a constant stress up to critical displacement and a linear relationship. Finite element analysis shows that there is little difference in the predictions obtained from the two models. An approximate analysis is presented for the constant stress stress-displacement model which is shown to agree with a finite element solution and experimental data. Hence it is argued that the approximate method using a constant stress model for the fracture process zone is sufficient for accurate prediction of delaminations.     

Synthesis and Characterization of Silver Nanoparticles and Silver Inks: Review on the Past and Recent Technology Roadmaps

The synthesis of silver nanoparticles for silver ink formation has attracted broad interest in the electronic part printing and semiconductor chip industry due to the extraordinary electrical and mechanical properties of these materials. The preparation of silver nanoparticles through a physical or chemical reduction process is the most common methodology applied to obtain nanoparticles with the required size, shape and surface morphology. The chemical solution or solvent carrier applied for silver ink formulation must be applied simultaneously with the direct writing technique to produce the desired adherence, viscosity, and reliable performance. This review paper discusses the details concerning the past and recent advancement of the synthesis and characterization of silver nanoparticles and silver ink formation. A review on the advantages of various sintering techniques, which aim to achieve the electrical and mechanical properties of the required printed structure, is also included. A brief summary concerning the recent challenges and improvement approaches is presented at the end of this review.     

Fabrication of Copper Nanowire Films and their Incorporation into Polymer Matrices for Antibacterial and Marine Antifouling Applications

With the ban of tributyltin, copper‐based biocides are now widely used in antifouling coatings as the major active ingredients. Given the past experience of heavy‐metal accumulation in harbors with limited water exchange, there is a significant interest in developing copper materials that greatly reduce the amount of copper ions released into marine surroundings. In this paper, copper nanowires (NWs) encapsulated in polymer matrices are investigated as the means to control the release of copper ions and to achieve a long‐lasting antifouling effect. Very long CuNWs with high aspect ratio in organic solution are drop‐coated onto substrates to fabricate uniform thin films. They are then incorporated into an elastomeric polydimethylsiloxane (PDMS) matrix. A small amount of CuNWs in PDMS can inhibit barnacle cyprid settlement, while it exhibits low mortality to cyprids and nauplii present in the surrounding seawater environment. The low levels of copper released after 50 days suggest that the intersecting and interconnected CuNWs embedded in PDMS could potentially release copper ions continuously over a few years in seawater. This approach provides a novel platform to use hybrid materials as effective marine antifouling coatings, and may be applied to fouling release materials to enhance their antifouling properties.     

Seroprevalence of hepatitis B and C viral markers in patients with primary hepatocellular carcinoma in Singapore

This paper reviews studies on the basic principles of biostimulation of wound healing by various low-energy lasers. It looks at the mechanism of action of biostimulation as well as the laser's effect on cell proliferation, collagen synthesis, and would healing.     

Experimental Studies of Hydrodynamics and Regime Transition in Bubble Columns

The detailed flow structures in bubble columns with and without internal draught tube have been investigated using the PIV technique. The onsets of transition due to vortex formation and different flow patterns with and without draught tube have been studied using the drift‐flux model and the experimentally measured Reynolds stresses. The role of solid particles and liquid viscosity, as well as bubbling orifice configuration on the flow patterns and regime transition has also been studied and discussed.     

Neural apoptosis in the retina during experimental and human diabetes. Early onset and effect of insulin

This study determined whether retinal degeneration during diabetes includes retinal neural cell apoptosis. Image analysis of retinal sections from streptozotocin (STZ) diabetic rats after 7.5 months of STZ diabetes identified 22% and 14% reductions in the thickness of the inner plexiform and inner nuclear layers, respectively (P < 0. 001). The number of surviving ganglion cells was also reduced by 10% compared to controls (P < 0.001). In situ end labeling of DNA terminal dUTP nick end labeling (TUNEL) identified a 10-fold increase in the frequency of retinal apoptosis in whole-mounted rat retinas after 1, 3, 6, and 12 months of diabetes (P < 0.001, P < 0. 001, P < 0.01, and P < 0.01, respectively). Most TUNEL-positive cells were not associated with blood vessels and did not colocalize with the endothelial cell-specific antigen, von Willebrand factor. Insulin implants significantly reduced the number of TUNEL-positive cells (P < 0.05). The number of TUNEL-positive cells was also increased in retinas from humans with diabetes. These data indicate that retinal neural cell death occurs early in diabetes. This is the first quantitative report of an increase in neural cell apoptosis in the retina during diabetes, and indicates that neurodegeneration is an important component of diabetic retinopathy.     

The role of functionalized carbon nanotubes in a PA6/LCP blend

Multi-walled carbon nanotubes (MWCNTs) were carboxyl-functionalized in order to improve their dispersion in a polymer matrix. The carboxyl-functionalized MWCNTs (i.e., MWCNT-COOH) were added into a blend matrix consisting of polyamide 6 (PA6) and liquid crystalline polymer (LCP) (PA6:LCP = 80:20 in weight) to make ternary composites. The effects of MWCNT-COOH on the rheological, physical, morphological, thermal, mechanical, and electrical properties of the ternary composites have been examined systematically. The dispersion of MWCNTs in the polymer matrix and their interactions with the polymers (i.e., PA6 and LCP) were found to be the most important factors affecting all properties. The functionalization of MWCNTs resulted in the significant improvement in their dispersion in the polymer matrix and largely enhanced the interactions of MWCNTs with the polymer matrix. The functionalized MWCNTs acted not only as reinforcement fillers but also as a compatibilizer that could enhance the interfacial adhesion between PA6 and LCP. Interestingly, the packing density of the polymer matrix was greatly increased by adding MWCNT-COOH.     

The performance of superhydrophobic and superoleophilic carbon nanotube meshes in water–oil filtration

Vertically-aligned multi-walled carbon nanotubes (CNTs) were grown on stainless steel (SS) mesh by thermal chemical vapor deposition with a diffusion barrier of Al₂O₃ film. These three-dimensional porous structures (SS-CNT meshes) were found to be superhydrophobic and superoleophilic. Water advancing contact angles of 145–150° were determined for these SS-CNT meshes in air and oil (gasoline, isooctane). Oil, on the other hand, completely wet the SS-CNT meshes. This combined superhydrophobic and superoleophilic property repelled water while allowed the permeation of oil. Filtration tests demonstrated efficiencies better than 80% of these SS-CNT meshes as the filtration membranes of the water-in-oil emulsions. We have conducted quantitative analysis on the diameters of the oil droplets in both the feed emulsion and the filtrate. Then, we have evaluated the issue of water blockage and possible way to improve the filtration efficiency. Finally, the filtration and blockage mechanisms are proposed.