Green Measurements for Software Product Based on Sustainability Dimensions

Software is a central component in the modern world and vastly affects the environment’s sustainability. The demand for energy and resource requirements is rising when producing hardware and software units. Literature study reveals that many studies focused on green hardware; however, limited efforts were made in the greenness of software products. Green software products are necessary to solve the issues and problems related to the long-term use of software, especially from a sustainability perspective. Without a proper mechanism for measuring the greenness of a particular software product executed in a specific environment, the mentioned benefits will not be attained. Currently, there are not enough works to address this problem, and the green status of software products is uncertain and unsure. This paper aims to identify the green measurements based on sustainable dimensions in a software product. The second objective is to reveal the relationships between the elements and measurements through empirical study. The study is conducted in two phases. The first phase is the theoretical phase, where the main components, measurements and practices that influence the sustainability of a software product are identified. The second phase is the empirical study that involved 103 respondents in Malaysia investigating current practices of green software in the industrial environment and further identifying the main sustainability dimensions and measurements and their impact on achieving green software products. This study has revealed seven green measurements of software product: Productivity, Usability, Cost Reduction, Employee Support, Energy Efficiency, Resource Efficiency and Tool Support. The relationships are statistically significant, with a significance level of less than 0.01 (p = 0.000). Thus, the hypothesised relationships were all accepted. The contributions of this study revolve around the research perspectives of the measurements to attain a green software product.     

A novel triple notch‐bands ultra wide‐band band‐pass filters using parallel multi‐mode resonators and CSRRs

This article discusses a technique based on combination of multimode resonators (MMR) and complementary split ring resonators (CSRR) to design multi notch‐bands ultra wide‐band (UWB) band‐pass filters (BPF). The proposed structure consists of two parallel multimode resonators, resulting in a dual notch‐band UWB BPF, integrated with a single cell of CSRR to realize the third notch‐band. The mechanism of realizing the notch‐bands is mathematically presented and a triple notch‐bands UWB BPF is designed, simulated and fabricated. The overall size of the proposed filter is reported to be around 36 × 7.7 mm² where a size reduction of around 35% is demonstrated in comparison to the conventional filter. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:375–381, 2014.     

Parallel‐series connected rectenna array using frequency selective surface (FSS) for power harvesting applications at 5.8 GHz

This article presents a frequency selective surface (FSS) and rectenna array in parallel‐series connection to harvest power of wireless power systems. To improve the basic antenna parameters, a frequency selective surface was mounted on the reverse side of the substrate. According to the results, the proposed method showed significant improvement in comparison to other methods in both single and rectenna array. Moreover, the conversion efficiency of the presented technique was increased to 76%. The output voltage of 4.5 and 9 V and the current of 60 and 120 mA were resulted for 5 and 10 rectenna units, respectively. The proposed arrays can be expanded to large scale integrated array without any significant degradation in conversion efficiency.     

Performance evaluation of supported ionic liquid membrane for removal of phenol

This work evaluates the performance of ionic liquid in supported liquid membrane (SLM) for the removal of phenol from wastewater. Ionic liquids are organic salts entirely composed of organic cations and either organic or inorganic anions. Due to the fact that the vapor pressure of ionic liquid is not detectable and they are sparingly soluble in most conventional solvents, they can be applied in SLM as the organic phase. In this work, 1-n-alkyl-3-methylimidazolium salts, [C_nMIM]⁺[X]⁻ have been investigated so as to determine an optimal supported ionic liquid membrane. The effect of operational parameters such as pH, stirring speed and the concentration of stripping agent has been studied, and an evaluation of different membrane supports were also carried out. With a minimal amount of the ionic liquid 1-Butyl-3-methylimidazolium hydrogensulfate, 85% phenol removal could be achieved by using polytetrafluoroethylene hydrophobic membrane filter in the SLM.     

Modeling of linear time-varying systems by linear time-invariant systems of lower order

A technique for modeling linear time-varying differential systems by linear time-invariant systems of lower order is discussed and criteria for determining stability, uniqueness, and the choice of the model of a given dimension are developed. In addition, a lower bound for the minimized performance index is derived and the effect on it of decreasing the dimension of the model is demonstrated.     

Preparation,characterization and in vitro anticancer activity of paclitaxel conjugated magnetic nanoparticles

In this study, magnetic nanoparticles (MNPs) coated with L-aspartic acid (F-Asp NPs) were synthesized through a co-precipitation method and conjugated with paclitaxel (PTX) (F-Asp-PTX NPs) by esterification reaction between the carboxylic acid end groups on MNPs surface and the hydroxyl groups of the PTX and studied its cytotoxic effect in vitro. The successful conjugating of PTX onto the nanoparticles (NPs) was confirmed by X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), fourier transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM) and transmission electron microscopy (TEM) techniques. The results showed that the average size was 46.11?±?7.8 (mean?±?SD (n?=?25)) nm. The cytotoxicity of void of PTX and F-Asp-PTX NPs were compared to each other by MTT assay of the treated MCF-7 cell line. The F-Asp-PTX NPs showed pH-dependent drug release behavior. These studies specify that F-Asp-PTX NPs have a very remarkable anticancer effect, for breast cancer cell line.     

Novel polymorphous aluminosilicate nano minerals: Preparation,characterization and dyes wastewater treatment

Polymorphous aluminosilicate, such as Andalusite, Kyanite and Sillimanite, were prepared and characterized by XRF, XRD, FT-IR and SEM analysis. These cheap and accessible nanoparticles were used for removal of Disperse Red 177 and Disperse Blue 60 dyes. The adsorption process was held in a batch system considering the effects of major parameters consist of pH, adsorbent dosage, dye initial concentration and temperature. The obtained results show that both Freundlich and Temkin isotherms suitably fit with experimental data of adsorption of dyes in equilibrium mode. Also, the adsorption of dyes follows and matches pseudo-second-order kinetic model for Andalusite, Kyanite and Sillimanite nanoadsorbents. Thermodynamic study of dye adsorption process proves low randomness, exothermicity and spontaneous reactions. The comparison of three adsorbent efficiencies for adsorption of DR-177 and D-B-60 dyes was as: Andalusite>Sillimanite>Kyanite and Sillimanite>Kyanite>Andalusite, respectively.     

Single‐wall carbon nanotubes dispersion behavior and its effects on the morphological and mechanical properties of the electrospun nanofibers

The dispersion behavior of single‐walled carbon nanotube (SWCNT) has important effects on morphological and mechanical properties of SWCNT composite nanofibers. The relationship of the dispersion conditions with morphological and mechanical characteristics for SWCNT / polyacrylonitrile (PAN) / polyvinylpyrrolidone (PVP) composite nanofibers have been examined. The SEM and TEM analyses of the nanofibers revealed that the deformation in the nanofiber structures increases with increasing concentration of SWCNTs. Tensile results showed that only 2 wt% SWCNT loading to the electrospun composite nanofibers gave rise to 10‐fold and 3‐fold increase in the tensile modulus and tenacity of nanofiber layers, respectively. Essentially, high mechanical properties and uniform morphology of the composite nanofibers were found at SWCNT concentration of ∼2 wt% due to their stable and individual dispersion. POLYM. COMPOS., 33:1951–1959, 2012. © 2012 Society of Plastics Engineers     

Compact tunable tri-band bandpass filter using varactor diodes for wireless fidelity,wireless local area network,and worldwide interoperability for microwaves access applications

The purpose of this paper is to present a tri-band bandpass filter (BPF) with compact structure. This filter consists of 50 Ω transmission line, varactor diode, positive-intrinsic-negative (PIN) diode, symmetrical square-shaped half-loop resonator pair, and three pairs of rectangular half circle that a T-stub is placed in it. By using the add PIN and varactor diodes in the proposed structure, it is possible to connect and disconnect each band, and change the central frequency up to 400 MHz. In addition, there is a situation to disconnect and connect all three bands simultaneously and asynchronously (unconditionally). This filter contains a low ripple value in all three bands. In this regard, the maximum ripple value does not exceed 0.3 dB and rejection is greater than 25 dB in total stop-band. An experimental tri-band BPF has been developed for wireless fidelity, wireless local area network, and worldwide interoperability for microwaves access applications. The measured results are properly accommodated with simulated results.     

Theoretical and Numerical Investigation of Required Torque in ECAP-Conform Process

Metallurgical and Materials Transactions B - In recent years, special attention has been paid to continuous methods of severe plastic deformation, such as the ECAP-Conform process. In this...