Simple approach to analysis of switched-capacitor circuits with nonideal op-amps

A possible method for the simulation of nonideal op-amps with a finite gain and bandwidth by means of an equivalent SC circuit, containing ideal components, is presented. The approach is extended by the case of an op-amp with non-switched input SC building blocks.     

On the determination of the thermal diffusion factor from column measurements

A new method for experimental determination of the thermal diffusion factor _T for binary gas mixtures with a thermal diffusion column (TDC) is developed, based on A. M. Rozen's equation of TDC. The experimental results for _T are obtained in a reduced form in this approximation. An experimental reference point, determined in the same TDC with a standard gas mixture, is used for the transformation of the results for _T in absolute units. The proposed method is applicable for arbitrary gas mixtures, irrespective of the mass difference of the components.     

Physikalische und mechanische Eigenschaften von Polyester-Polyamid-bikonstituenten Fasern

In a pilot plant biconstitusent fibres with poly(ethylene terephthalate) as main component and poly(caproamid) as second component were produced. Their microstructure, their behaviour during melting and crystallization, some dynamic-mechanic and mechano-textile properties as well as some electrostatic, hygroscopic and dyeing properties were determined. The biconstituent fibres have a low capability for electrifying and tend to show a “pilling”-effect. Their dyeing abilities open possibilities for interesting dyeing effects. An aim of the investigation was to clear some changes in the physical and mechanical properties of the biconstituent fibres from the view of their fibrille-matrix-structure and from the mutual effect between the two components at the interphase.     

Induction of DNA-double-strand breaks by auger electrons from 99mTc complexes with DNA-binding ligands

The potential of certain Auger electron emitting nuclides for systemic radiotherapeutic applications has recently gained much attention. In particular, the ability of several nuclides, including 111In, 125I, and 123I, to induce DNA double-strand breaks (dsb), a good indicator of cytotoxicity, has been extensively studied. However, this ability has never previously been shown experimentally for 99mTc, which, besides the well-known gamma radiation that is used for diagnostic applications, also emits an average of 1.1 conversion electrons and 4 Auger or Coster-Kronig electrons per decay. Owing to the short range of Auger electrons, the radionuclide needs to be located very close to the DNA for dsb to occur. We synthesized two cationic 99mTcI-tricarbonyl complexes with pendant DNA binders, pyrene and anthraquinone. The X-ray crystal structures of the two complexes could be elucidated. Linear dichroism and UV/Vis spectroscopy revealed that the complex with pyrene intercalates DNA with a stability constant, K, of 1.1 x 10(6) M(-1), while the analogous complex with anthraquinone interacts with DNA in a groove-binding mode and has an affinity value of K=8.9 x 10(4) M(-1). We showed with phiX174 double-stranded DNA that the corresponding 99mTc complexes induce a significant amount of dsb, whereas non-DNA-binding [TcO4]- and nonradioactive Re compounds did not. These results indicate that the Auger electron emitter 99mTc can induce dsb in DNA when decaying in its direct vicinity and this implies potential for systemic radiotherapy with 99mTc complexes.     

Reconstruction analysis of honeybee colony collapse disorder modeling

Optimization and Engineering - The honeybee has a significant impact on industry and nature. In recent years, a mysterious disease make honeybees die, often losses reach 80–100% of the...     

Comparison of the fatty acids of the tunicateBotryllus schlosseri from the Black Sea with two associated bacterial strains

The fatty acid composition of the tunicateBotryllus schlosseri and of two bacterial strains found within the tunicate, namelyVibrio parahaemolyticus and of an associated but previously unreported gram positive cocci were studied. The polyunsaturated fatty acids 6,9,12-octadecatrienoic acid, 5,8,11,14,17-eicosapentaenoic acid, and 4,7,10,13,16,19-docosahexaenoic acid were particularly abundant inB. schlosseri and were not detected in the two bacterial strains found in the tunicate. Theiso/anteiso pair, 13-methyltetradecanoic acid and 12-methyltetradecanoic acid, were the principal fatty acids in the gram positive cocci, and the 9- and 11-hexadecenoic acids were particulary abundant inV. parahaemolyticus. The diunsaturated fatty acid 9,12-octadecadienoic acid was also shown to be present inV. parahaemolyticus. The fatty acid composition of a third bacterial strain, characterized as either aPseudomonas or anAlteromonas species, and shown to be present only in the sea water from the Black Sea and not inB. schlosseri, is also reported. This is the first investigation on fatty acids from Black Sea bacteria.     

Thermal behavior of poly(ethylene‐co‐propylene) containing carbon nanofibers

The effect of carbon nanofiber on the thermal behavior of poly(ethylene‐co‐propylene) (PEP) as revealed by differential scanning calorimetry and thermogravimetric analysis is reported. Analysis showed faster crystallization of PEP at higher temperature upon cooling with the increase of carbon nanofiber (CNF) content. The crystallization behavior changed to a single narrow crystallization peak as compared with the broad double crystallization peak of the neat polymer. This demonstrates the nucleation ability of CNF to induce crystals with more uniform distribution. The modified‐Avrami approach was used to study the crystallization behavior. We found that the crystallization rate constant increased with addition of CNFs. The dimensionality of crystal growth was found not to depend significantly on the content of CNF. Thermal degradation in air was monitored using thermogravimetric analysis and observed that the incorporation of nanofiber greater than 2.4 vol% improves thermal stability of PEP. All these results indicate that CNFs can significantly help polymer processing and increase thermal stability of polymers. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers