Heat capacities of polyethylene and linear fluoropolymers

Heat capacities at constant pressure, C_p, and at constant volume C_v, were calculated with the help of normal mode frequency spectra and compared to experimental data for crystalline or semicrystalline polyethylene, poly(vinyl fluoride), poly(vinylidene fluoride), polytrifluooroethylene and poly(tetrafluoroethylene). A calculation scheme using a Tarasov function for 2N skeletal vibrational modes and an approximation of the residual 7N normal modes from known data on polyethylene and polytetrafluoroethylene is developed for all homologous, linear fluoropolymers. N is the number of carbon backbone atoms of the repeating unit. Calculations can be carried out over the whole temperature range 0 K to melting. For the two theta temperatures and the constant A₀ used for C_v to C_p conversion, fluorine-concentration dependent curves are given. The relations are expected to hold also for copolymers and blends of intermediate fluorine contents. Recommended experimental (data bank) heat capacities agree to ±2.5% with the calculations.     

On challenges of model transformation from UML to Alloy

The Unified Modeling Language (UML) is the de facto language used in the industry for software specifications. Once an application has been specified, Model Driven Architecture (MDA) techniques can be applied to generate code from such specifications. Since implementing a system based on a faulty design requires additional cost and effort, it is important to analyse the UML models at earlier stages of the software development lifecycle. This paper focuses on utilizing MDA techniques to deal with the analysis of UML models and identify design faults within a specification. Specifically, we show how UML models can be automatically transformed into Alloy which, in turn, can be automatically analysed by the Alloy Analyzer. The proposed approach relies on MDA techniques to transform UML models to Alloy. This paper reports on the challenges of the model transformation from UML class diagrams and OCL to Alloy. Those issues are caused by fundamental differences in the design philosophy of UML and Alloy. To facilitate better the representation of Alloy concepts in the UML, the paper draws on the lessons learnt and presents a UML profile for Alloy.     

The influence of spiral jet-milling on the physicochemical properties of carbamazepine form III crystals: Quality by design approach

The purpose of this study was to investigate the influence of spiral jet-milling process on the physicochemical characteristics of α polymorphic active pharmaceutical ingredient, using Carbamazepine form III as a model drug, and taking into consideration Quality by Design (QbD) approach to pharmaceutical development. A 2^(4-1) factorial screening design was implemented to identify the spiral jet-milling process variables that significantly affect the particle size distribution of milled samples. Diameter of injector nozzles, diameter of ring nozzles and air pressure were selected for further analysis using a 2^(3-1) factorial experimental design. Particle size distribution of additional samples was determined, while physicochemical properties were examined by differential scanning calorimetry (DSC), hot-stage polarized microscopy (HSPM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), and compared to those of un-milled drug. The gathered results shown that applied experimental design approach is capable to predict material behavior and could help in better understanding of material behavior during jet-milling process. Created design space (DS) provides assurance of product quality, expressed as the powder particle sizes lower than 5 μm, as well as, in initial polymorph form existence after jet-milling through combination and interaction of input variables.     

Performance and reliability of SLS ELA polysilicon TFTs fabricated with novel crystallization techniques

SLS ELA polysilicon TFTs fabricated in films crystallized with several novel techniques, yielding different film microstructure and texture, were investigated. The parameter statistics indicate that the TFT performance depends on film quality and asperities, in conjunction with the grain boundary trap density. The drain current transients, upon TFT switch from OFF to ON state, showed gate oxide polarization, related to film asperities and also confirmed the presence of extended defects in the TFTs of small mobilities. DC hot carrier stress was applied, indicating a reliability dependence on polysilicon structure and differences in degradation mechanisms for the various TFT technologies.     

Failure Analysis of a Cast Mn-Bronze Propeller

The investigation of a failure of a cast manganese bronze propeller, fractured after a short service period (~4–5 months), was conducted. Chemical analysis, visual inspection, optical microscopy, fractographic evaluation, SEM/EDS analysis, and hardness testing were used as the principal analytical tools for the failure investigation. The findings suggest that the failure occurred due to fatigue mechanism under low stress conditions. The non-conformities detected in material chemical composition, as well as the presence of internal and surface flaws could be considered as the main contributors of the premature failure of the propeller.     

Data-enabled extremum seeking: A cooperative concurrent learning-based approach

This paper introduces a new class of feedback-based data-driven extremum seeking algorithms for the solution of model-free optimization problems in smooth continuous-time dynamical systems. The novelty of the algorithms lies on the incorporation of memory to store recorded data that enables the use of information-rich datasets during the optimization process, and allows to dispense with the time-varying dither excitation signal needed by standard extremum seeking algorithms that rely on a persistence of excitation (PE) condition. The model-free optimization dynamics are developed for single-agent systems, as well as for multi-agent systems with communication graphs that allow agents to share their state information while preserving the privacy of their individual data. In both cases, sufficient richness conditions on the recorded data, as well as suitable optimization dynamics modeled by ordinary differential equations are characterized in order to guarantee convergence to a neighborhood of the solution of the extremum seeking problems. The performance of the algorithms is illustrated via different numerical examples in the context of source-seeking problems in multivehicle systems.     

A Novel Agglomerated-Silicon Thin-Film Transistor

This letter discusses the fabrication and electrical characteristics of a novel thin-film transistor (TFT) architecture based on intentionally agglomerated silicon for the active (island) region. Although the agglomeration of irradiated semiconductor is undesirable during the laser crystallization of polycrystalline-silicon TFTs, it is shown that precisely controlled wirelike structures can be obtained for certain conditions. Their width and pitch are maintained over very long distances, and their crystal structure is almost single crystal. Fabricated n- and p-channel TFT characteristics with maximum effective mobility values of 360 and 70 cm²/V ·s, respectively, are presented, with on/off current ratios exceeding ten decades.     

Continuous spatial assignment of moving users

Consider a set of servers and a set of users, where each server has a coverage region (i.e., an area of service) and a capacity (i.e., a maximum number of users it can serve). Our task is to assign every user to one server subject to the coverage and capacity constraints. To offer the highest quality of service, we wish to minimize the average distance between users and their assigned server. This is an instance of a well-studied problem in operations research, termed optimal assignment. Even though there exist several solutions for the static case (where user locations are fixed), there is currently no method for dynamic settings. In this paper, we consider the continuous assignment problem (CAP), where an optimal assignment must be constantly maintained between mobile users and a set of servers. The fact that the users are mobile necessitates real-time reassignment so that the quality of service remains high (i.e., their distance from their assigned servers is minimized). The large scale and the time-critical nature of targeted applications require fast CAP solutions. We propose an algorithm that utilizes the geometric characteristics of the problem and significantly accelerates the initial assignment computation and its subsequent maintenance. Our method applies to different cost functions (e.g., average squared distance) and to any Minkowski distance metric (e.g., Euclidean, L ₁ norm, etc.).     

Data mining for agent reasoning: A synergy for training intelligent agents

The task-oriented nature of data mining (DM) has already been dealt successfully with the employment of intelligent agent systems that distribute tasks, collaborate and synchronize in order to reach their ultimate goal, the extraction of knowledge. A number of sophisticated multi-agent systems (MAS) that perform DM have been developed, proving that agent technology can indeed be used in order to solve DM problems. Looking into the opposite direction though, knowledge extracted through DM has not yet been exploited on MASs. The inductive nature of DM imposes logic limitations and hinders the application of the extracted knowledge on such kind of deductive systems. This problem can be overcome, however, when certain conditions are satisfied a priori. In this paper, we present an approach that takes the relevant limitations and considerations into account and provides a gateway on the way DM techniques can be employed in order to augment agent intelligence. This work demonstrates how the extracted knowledge can be used for the formulation initially, and the improvement, in the long run, of agent reasoning.