Structure and processability of iodinated poly(vinyl alcohol). IV. Drawability of the films iodinated at solution before casting

The drawability of iodinated at solution before casting (IBC) polyvinyl alcohol films prepared by casting aqueous solutions of 10 wt % PVA containing 15.2, 39.8, 83.2, 117.0, and 140.1% was examined with a tensile tester at 20–60°C. The tensile behavior of IBC films showed that the yield and breaking loads were much lower, and the breaking elongation was even higher than those of the unoriented iodinated after casting (IAC) films as well as the untreated PVA films. The maximum draw ratios of the films with the weight gain of 15.2, 39.8, 83.2, 117, and 140.1% were 4.5, 5.5, 8.5, 8.0, and 7.5, respectively, which were achieved at 20°C in all. The crystallinity of all films increased by the maximum draw, regardless of crystallinity before drawing. The crystalline structure was recovered to the original PVA crystalline lattice by deiodination. Amorphous orientation and initial moduli increased with the maximum draw ratio, while the orientation of crystals was constant. The orientation and moduli increased up to the weight gain of 83.2%, whose highest draw ratio and initial modulus were 8.5 and of 7.1 GPa, respectively, and then decreased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

The role of grain-boundary on the hydrogen-induced degradation inthin-film ferroelectric capacitors

The electrical properties of thin-film ferroelectric capacitors are known to degrade severely when exposed to hydrogen. In this study, we directly measured the effects of the grain boundary on the hydrogen-induced degradation in ferroelectric Pb(Zr, Ti)O₃ (PZT) thin films by the location of the top Pt electrode either inside the grains or at the grain boundary. A strong relationship between the grain boundary and the electrical properties of ferroelectric capacitors as a result of hydrogen annealing was found. The degradation of the electrical properties in thin-film ferroelectric capacitors after hydrogen annealing is mainly due to the presence of the grain boundary in the ferroelectric thin film     

A kinetic model for polystyrene (PS) pyrolysis reaction

A mathematical model for the pyrolysis reaction of polystyrene (PS) in a semi-batch reactor has been presented. The thermal degradation of PS was flexibly modeled by a combination of random and specific chain-end scissions. Numerical simulation was used to investigate the effect of operating conditions on the PS products spectrum, the results of which were validated by the experimental data. It was found that as the reaction temperature increased (decreased), the monomer fraction in the products became lower (higher) while the trimer higher (lower). No significant variation in the product composition was, however, observed while constant temperature was maintained. These results indicate the reaction temperature is an effective manipulated variable for the control of products composition of PS pyrolysis. The calculation of the optimum temperature trajectories through the optimization study can thus be of interest for achieving productivity enhancement in plastics pyrolysis processes. This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement from Korea University.     

A Lyapunov functional approach to robust stability analysis of continuous-time uncertain linear systems in polytopic domains

In this paper, a sufficient linear matrix inequality (LMI) condition is presented for robust stability analysis of continuous-time linear time-invariant (LTI) systems in polytopic domains. The underlying idea behind the proposed approach is to introduce a family of complex functions which map the closed right-hand side of the complex plane into the inside of the closed unit circle centered at the origin. Then, the mapping properties are used to assure that all the eigenvalues of a system are located in the open left-hand side of the complex plane. Examples show the validity of the proposed condition.     

Comments on “A new robust control for a class of uncertaindiscrete-time systems”

A completed proof for a theorem on the robust controller design proposed in Wang and Ghosh (ibid. vol.43 (1997)) is presented in this paper     

A Study on the Pd/a-Si/Ni Seed Layer for Metal-Induced Lateral Crystallization and Poly-Si TFTs

The effect of Pd on the growth rate of metal-induced lateral crystallization (MILC) from Ni seed and the electrical properties of thin-film transistors (TFTs) fabricated on the films crystallized by MILC were investigated. When the Pd metal is placed on the amorphous-silicon/Ni-seed layer, the MILC growth rate is two to three times faster than that of conventional Ni-MILC, without any degradation of TFTs. These results were explained by a stress that is generated by the formation of Pd₂Si     

High efficiency red phosphorescent organic light-emitting diodes using a spirobenzofluorene type phosphine oxide as a host material

High efficiency red phosphorescent organic light-emitting diodes have been developed using a spirobenzofluorene type phosphine oxide (SPPO2) as a host material. The SPPO2 had a high glass transition temperature of 119 °C and a smooth surface morphology with a surface roughness less than 1 nm. The red device with the SPPO2 as a host showed a quantum efficiency of 14.3% with a current efficiency of 20.4 cd/A.     

Tunable 3D Nanoresonators for Gas‐Sensing Applications

The detection of gas species with high sensitivity is a significant task for fundamental sciences as well as for industrial applications. Similarly, the ongoing trend for device miniaturization brings new challenges for advanced fabrication including on‐demand functionality tuning. Following this motivation, here the additive, direct‐write fabrication of freestanding 3D nanoarchitectures is introduced, which can be brought into mechanical resonance via electric AC fields. Specifically, this study focuses on the 3D nanostructure synthesis, the subsequent determination of Young's modulus, and demonstrates a postgrowth procedure, which can precisely tune the material modulus. As‐fabricated resonators reveal a Young's modulus of 9–13 GPa, which can be increased by a factor greater than 5. Next, the electric readout of the resonance behavior is demonstrated via electric current measurement as an essential element for the resonance sensor applications. Finally, the implications of gas‐physisorption and gas‐chemisorption on the resonance frequencies are studied, representing a proof‐of‐principle for sensing applications by the here presented approach.     

High‐Performance,Transparent Thin Film Hydrogen Gas Sensor Using 2D Electron Gas at Interface of Oxide Thin Film Heterostructure Grown by Atomic Layer Deposition

A high‐performance, transparent, and extremely thin (<15 nm) hydrogen (H₂) gas sensor is developed using 2D electron gas (2DEG) at the interface of an Al₂O₃/TiO₂ thin film heterostructure grown by atomic layer deposition (ALD), without using an epitaxial layer or a single crystalline substrate. Palladium nanoparticles (≈2 nm in thickness) are used on the surface of the Al₂O₃/TiO₂ thin film heterostructure to detect H₂. This extremely thin gas sensor can be fabricated on general substrates such as a quartz, enabling its practical application. Interestingly, the electron density of the Al₂O₃/TiO₂ thin film heterostructure can be tailored using ALD process temperature in contrast to 2DEG at the epitaxial interfaces of the oxide heterostructures such as LaAlO₃/SrTiO₃. This tunability provides the optimal electron density for H₂ detection. The Pd/Al₂O₃/TiO₂ sensor detects H₂ gas quickly with a short response time of <30 s at 300 K which outperforms conventional H₂ gas sensors, indicating that heating modules are not required for the rapid detection of H₂. A wide bandgap (>3.2 eV) with the extremely thin film thickness allows for a transparent sensor (transmittance of 83% in the visible spectrum) and this fabrication scheme enables the development of flexible gas sensors.