Effects of breed and age at slaughter on degradation of muscle lipids during processing of dry‐cured hams

Hams from Landrace, Duroc and Hampshire pigs slaughtered at ages 6, 7.5 and 9 months were processed to generate Norwegian Parma‐style hams. Lipid contents and the compositions of fatty acid classes (ΣSFA, ΣMUFA, ΣPUFA) within neutral lipids, phospholipids and free fatty acids were determined. Small differences in lipid degradation and composition of the classes were revealed. However, significant sensory differences related to lipids were observed. Breed was more important than age. Dry‐cured Hampshire hams gave a more intense mature odour that may be associated with higher overall lipid degradation. Unexpectedly, these hams also demonstrated high juiciness and tenderness, which could be related to the melting characteristics of the fat. Dry‐cured Duroc hams showed a higher susceptibility towards rancidity, presumably associated with preferential oxidation of n‐6 fatty acids relative to C18:1 n‐9. Dry‐cured Landrace hams showed the lowest juiciness and tenderness, likely due to their lower fat content (marbling).     

Relating catalyst structure and composition to the water–gas shift activity of Cu–Zn-based mixed-oxide catalysts

In order to investigate the effect of cerium oxide on Cu–Zn-based mixed-oxide catalysts four catalyst samples were characterized by means of XRD, in situ XANES and thermogravimetric analysis. The activity of the catalyst samples was tested for the forward water–gas shift reaction. Cerium oxide was found to increase the crystallinity of the ZnO phase indicating a segregation of the Cu and ZnO phases. The TOF of the water–gas shift reaction based on chemisorption data was found to be independent of composition and preparation conditions of the four catalyst samples. In contrast, the catalyst stability depends on composition and preparation conditions. Cerium oxide impregnated before calcination of the hydrotalcite-based Cu–Zn precursors leads to a more stable water–gas shift catalyst.     

Effect of specimen size and loading conditions on spalling of concrete

Different qualities of concrete have been fire tested using different geometries of the specimens as well as different load levels and load configurations. The main objective with the study was to examine a test methodology consisting of a full‐scale test and different small scale‐tests for determining the probability of spalling and the amount of spalling of fire exposed concrete structures. A reference specimen was defined as a one‐sided fire exposed slab with the dimensions 1800 × 1200 mm² giving an exposed area of 1500 × 1200 mm². A number of concrete qualities with different probabilities for spalling, were tested using the reference specimen. These tests showed that the reference specimens worked well giving the expected test results. Small specimens were manufactured in different shapes with the same concrete as the one used in the reference tests. These small specimens were tested either at the same time as the reference specimens in the large furnace or afterwards on a small‐scale furnace where the fire exposed surface was 450 × 360 mm². The test results clearly show the increased probability and the increased amount of spalling by using external compressive loading. The results also show that by using pre‐stress through bars or wires the load can be lost due to heating of the bars/wires which results in a decreased amount of spalling. The boundary of the specimen also affects the amount of spalling. The spalling around the edges was in all tests less than the spalling on the central parts of the exposed area. It could also be noted that the spalling did not pass completely through any of the specimens. The reason for this is probably that the water/vapour could migrate out from the unexposed surface of the specimen. Copyright © 2006 John Wiley & Sons, Ltd.     

On the off-design of a natural gas-fired combined cycle with CO2 capture

During the last 15 years cycles with CO₂ capture have been in focus, due to the growing concern over our climate. Often, a natural gas fired combined cycle with a chemical absorption plant for CO₂ capture from the flue gases have been used as a reference in comparisons between cycles. Neither the integration of the steam production for regeneration of amines in the combined cycle nor the off-design behaviour of such a plant has been extensively studied before.     

UNSTEADY-STATE SORPTION MEASUREMENTS A TEST OF DIFFERENT METHODS TO EVALUATE THE DIFFUSIVITY FROM UNSTEADY-STATE SORPTION MEASUREMENTS

Different simple methods for evaluating the diffusivity from a sorption measurement are presented and tested when there is a surface resistance (a limited mass transfer coefficient), a non-perfect step in relative humidity or non-Fickian effects. It is concluded that the different methods have different qualities and it is impossible to give a general recommendation on which method to use. The best tactic is probably to use more than one of the methods. A knowledge of the experimental conditions will help in choosing the best method.     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

An efficient return algorithm for non-associated plasticity with linear yield criteria in principal stress space

An efficient return algorithm for stress update in numerical plasticity computations is presented. The yield criterion must be linear in principal stress space and can be composed of any number of yield planes. Each of these yield planes may have an associated or non-associated flow rule. The stress return and the formation of the constitutive matrix is carried out in principal stress space. Here the manipulations simplify and rely on geometrical arguments. The singularities arising at the intersection of yield planes are dealt with in a straightforward way also based on geometrical considerations. The method is exemplified on non-associated Mohr–Coulomb plasticity throughout the paper.     

Numerical modelling of the structural behaviour of thin-walled cast magnesium components using a through-process approach

A through-process methodology for numerical simulations of the structural behaviour of thin-walled cast magnesium components is presented. The methodology consists of casting process simulations using MAGMAsoft, mapping of data from the process simulation onto a FE-mesh (shell elements) and numerical simulations using the explicit FE-code LS-DYNA. In this work, generic High Pressure Die Cast (HPDC) AM60 components have been studied using axial crushing, 3-point bending and 4-point bending tests. The experimental data are applied to obtain a validated methodology for finite element modelling of thin-walled cast components subjected to quasi-static loading. The cast magnesium alloy is modelled using a user-defined material model consisting of an elastic–plastic model based on a modified J2-flow theory and the Cockcroft–Latham fracture criterion. The fracture criterion is coupled with an element erosion algorithm available in LS-DYNA. The constitutive model and fracture criterion are calibrated both with data from material tests and data from the process simulation using MAGMAsoft.     

An overall model for maintenance optimization

This paper presents an approach for identifying the optimal maintenance schedule for the components of a production system. Safety, health and environment objectives, maintenance costs and costs of lost production are all taken into consideration, and maintenance is thus optimized with respect to multiple objectives. Such a global approach to maintenance optimization requires expertise from various fields, e.g., decision theory, risk analysis and reliability and maintenance modelling. Further, a close co-operation between management, maintenance personnel and analysts is required to achieve a successful result. In the past this has been a major obstacle to the extensive use of proper maintenance optimization methods in practice, and techniques to promote the communication between the involved parties of the optimization process is an essential element in the suggested approach. A simple step by step presentation of the required modelling is provided. Contrary to most current methods of RCM (Reliability Centered Maintenance), the approach is based on an analytic model, and therefore gives a sound framework for carrying out a proper maintenance optimization. The approach is also flexible as it can be carried out at various levels of detail, e.g., adopted to available resources and to the managements willingness to give detailed priorities with respect to objectives on safety vs production loss.     

Food-related coping strategies after Hurricane Andrew

This telephone survey examined food-related coping strategies in Floridian households after Hurricane Andrew. Approximately 137 households of university faculty and staff who lived in hurricane-damaged areas were interviewed. The average respondent was a college-educated woman between 41 and 60 years old. Prevailing food-purchasing problems included food stores that were either closed, without perishable food, distant, or crowded. In the absence of electricity and water, changes in food preparation included preparation of meals without a stove, more frequent use of grills and canned food, simpler meals, and less cooking. Changes in kitchen cleanup included using more disposables, cleaning more often, washing dishes by hand, and cleaning up less often because of damage in the kitchen. Respondents indicated that the hurricane experience taught them that they should have acquired more general supplies (eg, coolers, thermoses, propane stoves, and gas burners), more water and ice, and more nonperishable foods before the hurricane.