Magnetic resonance imaging (MRI) site planning and economics

Site planning and economic forecasting for MRI require careful, individualized analysis of several possible sites. Particular attention should be accorded to the magnetic environment. Realistic estimates of financial feasibility will depend heavily on decisions of regulators and third-party payers.     

Potential of microbial growth control in water hydraulic systems by UV‐irradiation and filtration

Water hydraulic systems use water as a pressure medium and, thus, do not pose such adverse environmental impacts as oil hydraulics. Microbial deterioration of the pressure medium and biofouling of the surfaces restrict the applicability of the water‐based technology. The potential of microbial growth control by UV‐irradiation and filtration was studied in a pilot‐scale water hydraulic system. The UV‐irradiation (25 m Ws cm^?2) of the pressure medium reduced the total viable counts of bacteria by 1–2 log₁₀ cfu cm^?3, whereas the total microbial cell numbers and the numbers of surface‐attached microorganisms remained unaffected. Prefiltration (1.2 µm, absolute) of the pressure medium decreased the total microbial cell number in the water phase and retarded the attachment of bacteria. The filtration during the operation (2 µm, absolute) decreased the total numbers of microbial cells and the total viable counts in the pressure medium, and microbial attachment on the surfaces. Microbial attachment was not prevented by filtration. The microbial water quality obtained by pre‐ and on‐line filtration of the pressure medium was sufficient to ensure the long‐term operation of the water hydraulic system assuming that clean work practices are complied with in assembly and during the operation. © 2002 Society of Chemical Industry     

Chemical inhibitors when timing is critical: a pharmacological concept for the maturation of T cell contacts

Cellular signal transduction proceeds through a complex network of molecular interactions and enzymatic activities. The timing of these molecular events is critical for the propagation of a signal and the generation of a specific cellular response. To define the timing of signalling events, we introduce the combination of high-resolution confocal microscopy with the application of small-molecule inhibitors at various stages of signal transduction in T cells. Inhibitors of Src-family tyrosine kinases and actin dynamics were employed to dissect the role of the lymphocyte-specific tyrosine kinase Lck in the formation and maintenance of T cell receptor/CD3-dependent contacts. Anti-CD3epsilon-coated coverslips served as a highly defined stimulus. The kinetics of the recruitment of the yellow fluorescent protein-tagged signalling protein ZAP-70 were detected by high-resolution confocal microscopy. The analysis revealed that at 5 min after receptor engagement, Lck activity was required for maintenance of contacts. In contrast, after 20 min of receptor engagement, the contacts were Lck-independent. The relevance of the timing of inhibitor application provides a pharmacological concept for the maturation of T cell-substrate contacts.     

Acute heavy alcohol intake increases silent myocardial ischaemia in patients with stable angina pectoris

PURPOSE: The purpose was to determine tumor neovascularisation via colour-coded Doppler (duplex) sonography and the "power mode", both visually and quantitatively, by means of videodensitometry. MATERIAL AND METHODS: 6 VX2 tumours of 4 to 11 mm size were implanted in 4 rabbits at various sites. The colour-coded duplex sonography and the new sonographic power technique were tested before and after having injected a new contrast medium (SH U 616A). RESULTS: If no contrast medium was injected, tumour neovascularisation was identified in only 50% of the cases. Injection of contrast medium increased signal intensity three to fourfold with all examined tumors. Combined use of the sonographic method by the power technique with injection of contrast medium is outstandingly suitable for tumor vessel imaging even of small tumors, as these initial results seem to show. CONCLUSION: If these results are corroborated by further studies, contrast-medium supported sonographic technique may possibly become established as an alternative method to other imaging procedures.     

Effect of Anisotropy and Destructuration on the Behavior of Murro Test Embankment

This paper investigates the influence of anisotropy and destructuration on the behavior of a test embankment on soft clay. The test embankment at Murro, Finland, was commissioned in 1993 by the Finnish Road Administration and has been monitored for over 10?years. The construction and consolidation of Murro test embankment is analyzed with finite element method using three different constitutive models to represent the soft soil. The results are compared with field observations. The constitutive models used include two recently proposed constitutive models, namely S-CLAY1 that accounts for initial and plastic strain induced anisotropy and its extension, called S-CLAY1S. The S-CLAY1S model accounts, additionally, for interparticle bonding and degradation of bonds. For comparison, the test embankment is also analyzed using the isotropic Modified Cam Clay model. The simulations demonstrate that for this type of problem, it is important to account for the anisotropy, whereas destructuration appears to have less influence on predicted deformations. However, only a model incorporating destructuration can explain the decrease in undrained shear strength during consolidation that was measured in field.     

Angiotensin I-converting enzyme inhibitory properties of whey protein digests: concentration and characterization of active peptides

The aim of this study was to identify whey-derived peptides with angiotensin I-converting enzyme (ACE) inhibitory activity. The bovine whey proteins alpha-lactalbumin and beta-lactoglobulin were hydrolysed with pepsin, trypsin, chymotrypsin, pancreatin, elastase or carboxypeptidase alone and in combination. The total hydrolysates were fractionated in a two step ultrafiltration process, first with a 30 kDa membrane and then with a 1 kDa membrane. Inhibition of ACE was analysed spectrophotometrically. The peptides were isolated by chromatography and identified by mass and sequencing analysis. The most potent inhibitory peptides were synthesized by the 9-fluorenylmethoxycarbonyl solid phase method. Inhibition of ACE was observed after hydrolysis with trypsin alone, and with an enzyme combination containing pepsin, trypsin and chymotrypsin. Whey protein digests gave a 50% inhibition (IC50) of ACE activity at concentration ranges within 345-1733 micrograms/ml. The IC50 values for the 1-30 kDa fractions ranged from 485 to 1134 micrograms/ml and for the < 1 kDa fraction from 109 to 837 mg/ml. Several ACE-inhibitory peptides were isolated from the hydrolysates by reversed-phase chromatography, and the potencies of the purified peptide fractions had IC50 values of 77-1062 microM. The ACE-inhibitory peptides identified were alpha-lactalbumin fractions (50-52), (99-108) and (104-108) and beta-lactoglobulin fractions (22-25), (32-40), (81-83), (94-100), (106-111) and (142-146).     

The effect of external flow on the feeding currents of sessile microorganisms

Microscopic sessile suspension feeders live attached to surfaces and, by consuming bacteria-sized prey and by being consumed, they form an important part of aquatic ecosystems. Their environmental impact is mediated by their feeding rate, which depends on a self-generated feeding current. The feeding rate has been hypothesized to be limited by recirculating eddies that cause the organisms to feed from water that is depleted of food particles. However, those results considered organisms in still water, while ambient flow is often present in their natural habitats. We show, using a point-force model, that even very slow ambient flow, with speed several orders of magnitude less than that of the self-generated feeding current, is sufficient to disrupt the eddies around perpendicular suspension feeders, providing a constant supply of food-rich water. However, the feeding rate decreases in external flow at a range of non-perpendicular orientations due to the formation of recirculation structures not seen in still water. We quantify the feeding flow and observe such recirculation experimentally for the suspension feeder Vorticella convallaria in external flows typical of streams and rivers.     

Use of numerical modeling in design for co-firing biomass in wall-fired burners

Co-firing biomass with coal or gas in the existing units has gained increasing interest in the recent past to increase the production of environmentally friendly, renewable green power. This paper presents design considerations for co-firing biomass with natural gas in wall-fired burners by use of numerical modeling. The models currently used to predict solid fuel combustion rely on a spherical particle shape assumption, which may deviate a lot from reality for big biomass particles. A sphere gives a minimum in terms of the surface-area-to-volume ratio, which impacts significantly both motion and reaction of a particle. To better understand the biomass combustion and thus improve the design for co-firing biomass in wall-fired burners, non-sphericity of biomass particles is considered. To ease comparison, two cases are numerically studied in a long gas/biomass co-fired burner model. (1) The biomass particles are assumed as solid or hollow cylinders in shape, depending on the particle group. To model accurately the motion of biomass particles, the forces that could be important are all considered in the particle force balance, which includes a drag for non-spherical particles, an additional lift due to particle non-sphericity, and a “virtual-mass” force due to relatively light biomass particles, as well as gravity and a pressure-gradient force. Since the drag and lift forces are both shape factor- and orientation-dependent, coupled particle rotation equations are resolved to update particle orientation. To better model the reaction of biomass particles, the actual particle surface area available and the average oxygen mass flux at particle surface are considered, both of which are shape factor-dependent. (2) The non-spherical biomass particles are simplified as equal-volume spheres, without any modification to the motion and reaction due to their non-sphericity. The simulation results show a big difference between the two cases and indicate it is very significant to take into account the non-sphericity of biomass particles in order to model biomass combustion more accurately. Methods to improve the design for co-firing biomass in wall-fired burners are finally suggested.