Superswelling Microneedle Arrays for Dermal Interstitial Fluid (Prote)Omics

The noninvasive sampling of dermal interstitial fluid (ISF) for the monitoring of clinical biomarkers is a greatly appealing area of research. The identification of molecular biomarkers in biological fluids has been accelerated with -omics analyses but remains limited in ISF because of its time-consuming and complex extraction process. Here, the generation of microneedle (MN) patches made of superabsorbent acrylate-based hydrogels for the rapid sampling of dermal ISF is described to explore its proteome. In depth, iterative optimization allows the identification of novel acrylate-based compositions with the required chemical, mechanical, and biocompatibility properties allowing proteomic analysis of the extracted ISF for the first time after sampling with swelling MNs. The generated MN arrays show no cytotoxic effect, successfully cross the stratum corneum, and can collect up to 6 µL of dermal ISF in 10 min in vivo. Proteomics lead to the detection of 176 clinically relevant biomarkers in the collected samples validating the use of ISF as a relevant bodily fluid for disease monitoring and diagnostic. Importantly, it is discovered that extraction fingerprint is strongly dependent on the MNs chemistry, and thus specific biomarkers could be selectively extracted by tuning the composition of the patch, making the system versatile and specific.     

Pharmacological Evidence on Augmented Antiallodynia Following Systemic Co-Treatment with GlyT-1 and GlyT-2 Inhibitors in Rat Neuropathic Pain Model

The limited effect of current medications on neuropathic pain (NP) has initiated large efforts to develop effective treatments. Animal studies showed that glycine transporter (GlyT) inhibitors are promising analgesics in NP, though concerns regarding adverse effects were raised. We aimed to study NFPS and Org-25543, GlyT-1 and GlyT-2 inhibitors, respectively and their combination in rat mononeuropathic pain evoked by partial sciatic nerve ligation. Cerebrospinal fluid (CSF) glycine content was also determined by capillary electrophoresis. Subcutaneous (s.c.) 4 mg/kg NFPS or Org-25543 showed analgesia following acute administration (30–60 min). Small doses of each compound failed to produce antiallodynia up to 180 min after the acute administration. However, NFPS (1 mg/kg) produced antiallodynia after four days of treatment. Co-treatment with subanalgesic doses of NFPS (1 mg/kg) and Org-25543 (2 mg/kg) produced analgesia at 60 min and thereafter meanwhile increased significantly the CSF glycine content. This combination alleviated NP without affecting motor function. Test compounds failed to activate G-proteins in spinal cord. To the best of our knowledge for the first time we demonstrated augmented analgesia by combining GlyT-1 and 2 inhibitors. Increased CSF glycine content supports involvement of glycinergic system. Combining selective GlyT inhibitors or developing non-selective GlyT inhibitors might have therapeutic value in NP.     

Addition of ferulic acid,ethyl ferulate,and feruloylated monoacyl- and diacylglycerols to salad oils and frying oils

To determine antioxidative effects of ferulic acid and esterified ferulic acids, these compounds were added to soybean oils (SBO), which were evaluated for oxidative stability and frying stability. Additives included feruloylated MAG and DAG (FMG/FDG), ferulic acid, ethyl ferulate, and TBHQ. After frying tests with potato chips, oils were analyzed for retention of additives and polar compounds. Chips were evaluated for hexanal and rancid odor. After 15 h frying, 71% of FMG/FDG was retained, whereas 55% of ethyl ferulate was retained. TBHQ and ferulic acid levels were 6% and <1%, respectively. Frying oils with ethyl ferulate or TBHQ produced significantly less polar compounds than SBO with no additives. Chips fried in SBO with TBHQ or ferulic acid had significantly lower amounts of hexanal and significantly less rancid odor after 8 d at 60°C than other samples. Oils were also aged at 60°C, and stability was analyzed by PV, hexanal, and rancid odor. Oils with TBHQ or FMG/FDG had significantly less peroxides and hexanal, and a lower rancid odor intensity than the control. FMG/FDG inhibited deterioration at 60°C, whereas ethyl ferulate inhibited the formation of polar compounds in frying oil. Ferulic acid acted as an antioxidant in aged fried food. TBHQ inhibited oil degradation at both temperatures. Presented at the 94th AOCS Meeting & Expo, Kansas City, MO, May 4–7, 2003.     

Generating Rare Association Rules Using the Minimal Rare Itemsets Family

Rare association rules correspond to rare, or infrequent, itemsets, as opposed to frequent ones that are targeted by conventional pattern miners. Rare rules reflect regularities of local, rather than global, scope that can nevertheless provide valuable insights to an expert, especially in areas such as genetics and medical diagnosis where some specific deviations/illnesses occur only in a small number of cases. The work presented here is motivated by the long-standing open question of efficiently mining strong rare rules, i.e., rules with high confidence and low support. We also propose an efficient solution for finding the set of minimal rare itemsets. This set serves as a basis for generating rare association rules.     

Approximation Bounds for Minimum Information Loss Microaggregation

The NP-hard microaggregation problem seeks a partition of data points into groups of minimum specified size k, so as to minimize the sum of the squared euclidean distances of every point to its group's centroid. One recent heuristic provides an O(k³) guarantee for this objective function and an O(k²) guarantee for a version of the problem that seeks to minimize the sum of the distances of the points to its group's centroid. This paper establishes approximation bounds for another microaggregation heuristic, providing better approximation guarantees of O(k²) for the squared distance measure and O(k) for the distance measure.     

Evaluation of microalgae-based biorefinery alternatives

Microalgae-based biorefineries for the production of renewable biofuels like biodiesel, upgraded bio-oil, biochar, biogas and other high-value chemicals have received great attention in recent decades as potential major sources of energy for the future. Microalgae are a suitable species to produce biodiesel and other high energy density by-products; however, it is questionable whether a net energy gain can be realized or not considering the whole processing chain. In the present study, the energy balances of different algae-based biofuel and bioenergy production technologies are investigated in detail and compared to each other corresponding to a cradle-to-grave overall energetic analysis. The study includes cultivation, harvesting, cell pretreatments (cell disruption, drying, grinding), lipid extraction, transesterification, gasification and hydrothermal liquefaction with bio-oil stabilization and hydroprocessing. The energy consumption and energy gain are estimated for each operational step to determine the net energy ratio (NER, energy output over energy input) for the overall technologies studied. Our detailed investigation enables to detect the most energy consuming unit operation, that is, the bottleneck point(s) of the microalgae-based technologies which should be still improved in the future for the sake of more efficient algae-based biorefineries. The investigation makes also possible to evaluate and compare the different large scale alternatives for biomass transformation. Positive energy balances with a NER value of 1.109 and 1.137 are found in two already existing processes: open raceway ponds and closed photobioreactors, respectively. Our work gives also a detailed algorithm that can be followed at the evaluation of other microalgae-based biorefineries.     

Pulsed laser reshaping and fragmentation of upconversion nanoparticles — from hexagonal prisms to 1D nanorods through “Medusa”-like structures

One dimensional (1D) nanostructures attract considerable attention, enabling a broad application owing to their unique properties. However, the precise mechanism of 1D morphology attainment remains a matter of debate. In this study, ultrafast picosecond (ps) laser-induced treatment on upconversion nanoparticles (UCNPs) is offered as a tool for 1D-nanostructures formation. Fragmentation, reshaping through recrystallization process and bioadaptation of initially hydrophobic (β-Na_1.5Y_1.5F₆: Yb³⁺, Tm³⁺/β-Na_1.5Y_1.5F₆) core/shell nanoparticles by means of one-step laser treatment in water are demonstrated. “True” 1D nanostructures through “Medusa”-like structures can be obtained, maintaining anti-Stokes luminescence functionalities. A matter of the one-dimensional UCNPs based on direction of energy migration processes is debated. The proposed laser treatment approach is suitable for fast UCNP surface modification and nano-to-nano transformation, that open unique opportunities to expand UCNP applications in industry and biomedicine.

     

A DSS for Production Planning

This paper presents a decision support system designed to aid the production planner in choosing the values of the principle parameters governing just-in-time manufacturing. The DSS uses a knowledge base composed of data from simulations of the production of the entire product line under systematically varied conditions. The planners may add data from actual production experience as it is obtained. The stochastic dominance outranking method of Martel and Zaras allows the identification of clusters of parameters that respect the preferences of the decision maker. When launching an order for a product, the decision maker may judge certain sets of parameters to be equivalent. A visual interactive simulation model will then allow their comparison according to three performance criteria.