Electro-copolymerisation of indene and styrene

Electroinitiated cationic copolymerisation of indene and styrene was investigated by constant potential electrolysis. Effects of copolymerisation potential and temperature on the copolymer composition and the reactivity ratios are discussed. The reactivity ratios of the monomers were calculated according to the integrated Lewis-Mayo equation.     

Water absorption properties of phosphate glass fiber‐reinforced poly‐ϵ‐caprolactone composites for craniofacial bone repair

The moisture uptake of polymers and composites has increasing significance where these materials are specified for invasive, long‐term medical applications. Here we analyze mass gain and the ensuing degradation mechanisms in phosphate glass fiber reinforced poly‐?‐caprolactone laminates. Specimens were manufactured using in situ polymerization of ?‐caprolactone around a bed of phosphate glass fibers. The latter were sized with 3‐aminopropyltriethoxysilane to control the rate of modulus degradation. Fiber content was the main variable in the study, and it was found that the moisture diffusion coefficient increased significantly with increasing fiber volume fraction. Diffusion, plasticization, and leaching of constituents appear to be the dominant aspects of the process over these short‐term tests. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Enhancing electrochromic properties of polypyrrole by silsesquioxane nanocages

A new monomer, octa(thiophenephenyl)silsesquioxane (OThiophenePS) was synthesized via click chemistry. The chemical structure of OThiophenePS was characterized by nuclear magnetic resonance (¹H NMR) and Fourier transform infrared (FT-IR) spectroscopies. Electrochemical polymerization of pyrrole with OThiophenePS was performed resulting in polypyrrole-attached, polyhedral oligomeric silsesquioxane (OPS–PPy). The spectroelectrochemical studies show that the electrochromic properties of (OPS–PPy) are superior to those of polypyrrole (PPy). This great improvement can be attributed to the more accessible doping sites and the facile ion movement during the redox switching brought by the loose packing of the PPy chains.     

Robust MIMO disturbance observer analysis and design with application to active car steering

A multi‐input–multi‐output extension of the well‐known two control degrees‐of‐freedom disturbance observer architecture that decouples the problem into single‐input–single‐output disturbance observer loops is presented in this paper. Robust design based on mapping D‐stability and the frequency domain specifications of weighted sensitivity minimization and phase margin bound to a chosen controller parameter space is presented as a part of the proposed design approach. The effect of the choice of disturbance observer Q filter on performance is explained with a numerical example. This is followed by the use of structured singular values in the robustness analysis of disturbance observer controlled systems subject to structured, real parametric and mixed uncertainty in the plant. A design and simulation study based on a four wheel active car steering control example is used to illustrate the methods presented in the paper. Copyright © 2009 John Wiley & Sons, Ltd.     

PETOOL: MATLAB-based one-way and two-way split-step parabolic equation tool for radiowave propagation over variable terrain

A MATLAB-based one-way and two-way split-step parabolic equation software tool (PETOOL) has been developed with a user-friendly graphical user interface (GUI) for the analysis and visualization of radio-wave propagation over variable terrain and through homogeneous and inhomogeneous atmosphere. The tool has a unique feature over existing one-way parabolic equation (PE)-based codes, because it utilizes the two-way split-step parabolic equation (SSPE) approach with wide-angle propagator, which is a recursive forward–backward algorithm to incorporate both forward and backward waves into the solution in the presence of variable terrain. First, the formulation of the classical one-way SSPE and the relatively-novel two-way SSPE is presented, with particular emphasis on their capabilities and the limitations. Next, the structure and the GUI capabilities of the PETOOL software tool are discussed in detail. The calibration of PETOOL is performed and demonstrated via analytical comparisons and/or representative canonical tests performed against the Geometric Optic (GO) + Uniform Theory of Diffraction (UTD). The tool can be used for research and/or educational purposes to investigate the effects of a variety of user-defined terrain and range-dependent refractivity profiles in electromagnetic wave propagation.

Program summary

Program title: PETOOL (Parabolic Equation Toolbox)Catalogue identifier: AEJS_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJS_v1_0.htmlProgram obtainable from: CPC Program Library, Queen?s University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 143 349No. of bytes in distributed program, including test data, etc.: 23 280 251Distribution format: tar.gzProgramming language: MATLAB (MathWorks Inc.) 2010a. Partial Differential Toolbox and Curve Fitting Toolbox requiredComputer: PCOperating system: Windows XP and VistaClassification: 10Nature of problem: Simulation of radio-wave propagation over variable terrain on the Earth?s surface, and through homogeneous and inhomogeneous atmosphere.Solution method: The program implements one-way and two-way Split-Step Parabolic Equation (SSPE) algorithm, with wide-angle propagator. The SSPE is, in general, an initial-value problem starting from a reference range (typically from an antenna), and marching out in range by obtaining the field along the vertical direction at each range step, through the use of step-by-step Fourier transformations. The two-way algorithm incorporates the backward-propagating waves into the standard one-way SSPE by utilizing an iterative forward–backward scheme for modeling multipath effects over a staircase-approximated terrain.Unusual features: This is the first software package implementing a recursive forward–backward SSPE algorithm to account for the multipath effects during radio-wave propagation, and enabling the user to easily analyze and visualize the results of the two-way propagation with GUI capabilities.Running time: Problem dependent. Typically, it is about 1.5 ms (for conducting ground) and 4 ms (for lossy ground) per range step for a vertical field profile of vector length 1500, on Intel Core 2 Duo 1.6 GHz with 2 GB RAM under Windows Vista.     

Effects of blade tenderization,aging method and aging time on meat quality characteristics of Longissimus lumborum steaks from cull Holstein cows

The effects of blade tenderization (BT), two aging methods (dry (D) and wet (W)), and aging time (2 and 23 d) on tenderness, color, and sensory properties of Longissimus lumborum muscles from 12 cull Holstein cows were evaluated. Dry-aged loins had higher combined trim and aging losses than control (C) for both D- and W-aging, mostly because of excess trim losses. BT steaks had WBSF of 33.13 N while C steaks had WBSF of 41.46 N (P = 0.09). Aging decreased WBSF. Blade tenderized steaks had higher cook loss than C steaks. Aging, W-aging, and BT × W-aging improved myofibrillar (sensory) tenderness scores. Aging and/or BT improves sensory panel tenderness cull cow Longissimus lumborum steaks. Aging and blade tenderization combined can increase tenderness and value of Longissimus steaks from cull Holstein cows.     

Functionalized Hybrid Coatings on ABS Surfaces by PLD and Dip Coatings

It is important to give water-repellent and antibacterial properties to the acrylonitrile butadiene styrene (ABS) surfaces of the hearing aids. In this study, the sol–gel Si and sol–gel Ti solutions were prepared from the reactions of silicon ethoxide, titanium butoxide and methacrylic acid. The catalyst and Dynasylan F8815 were added to the sol–gel solutions to give hydrophobic properties onto the ABS surfaces. Additionally, silver nanoparticles were synthesized by nanosecond laser and added to the coating solutions to give extra antibacterial properties. The surfaces of the ABS targets were coated using the sol–gel dip coating and pulsed laser deposition techniques. The coatings with good adhesion between film and substrate and good water-repellent properties were achieved. The average contact angles for the coated ABS surfaces were measured in the range between 120 and 125 degrees. The obtained sol–gel materials and produced thin films onto the ABS surfaces were also analyzed in terms of the antibacterial properties. The highly antibacterial properties were observed in the sol–gel solutions and the thin films.     

Tribological Behavior of TiAlN,AlTiN, and AlCrN Coatings at Boundary Lubricating Condition

In this study, ~?3.5 µm thick multilayer titanium alumina nitride (TiAlN), alumina titanium nitride (AlTiN), and alumina chromium nitride (AlCrN) coatings were deposited on the H13 steel surface by cathodic arc physical vapor deposition (CAPVD) method. The tribological performance of the coatings was evaluated by a tribometer at boundary lubrication condition. Then, coating surfaces were observed by optical microscope, optical profilometer, and atomic force microscope to evaluate the morphological changes, wear volumes, and tribofilm thickness. Also, scanning electron microscopy (energy dispersive X-ray) and X-ray photoelectron spectrometry analyses were applied to coating surfaces for the tribochemical evolution of the tribofilm. Results showed that AlCrN coating performed the best tribological behavior at boundary lubricated condition, when compared to TiAlN and AlTiN coatings and it can be used as a wear resistant cam tappet coating in internal combustion engines.