Doped silicon and NIS junctions for bolometer applications

We discuss the performance, of a normal metal hot electron bolometer (NHEB) that we have measured at 0.3 K. We found that the noise equivalent power was limited by the amplifier noise. To improve the NHEB power response and to make it more robust and reliable we propose to substitute the normal metal with heavily doped silicon. The heavily doped silicon behaves like a metal with lower carrier concentration and has a smaller electron–phonon thermal coupling. We have fabricated superconductor-doped silicon-superconductor contacts (S-Sm-S) and we have used them as thermometers and coolers.     

Multicriteria procedure for the design and the management of infiltration systems.

Infiltration systems are frequently used as an option to manage urban storm drainage. By reducing flows and volumes in downstream sewers or in surface waters, they decrease the overflows and make it possible to recharge groundwater. They come in various forms with different uses; therefore, their performance is diverse and integrates multiple aspects. Consequently, a multicriteria approach was developed in order to quantify the performance of these systems and to help in decision making problems. For that purpose, a list of performance indicators integrating technical, economical, environmental and social aspects was developed. The performances were defined with the help of a working group composed of engineers from different technical or strategic departments from Greater Lyon and researchers from different fields. The paper presents the last version of the performance indicators tested according to a set of quality requirements: availability of data, relevance, fidelity, precision, sensitivity/robustness. This critical review of the set of indicators has led us to redefine a certain number of indicators, identify numerous biases and allow putting forward general instructions for criterion or indicator construction. The last phase is to propose multicriteria decision aid methods; a procedure using ELECTRE methods should be used.     

Scintillation prediction models compared to measurements on a timebase of several days

The prediction models for scintillation variance of ITU-R and Karasawa et al. (1988) are compared to measurements on a time base which is much shorter than originally considered for these models. It is shown that even after averaging over just three days, a good correlation with the measured variance is found. Both models predict higher scintillation variance than is measured at 19.8 GHz on a 12.7° elevation path in Kirkkonummi, Finland     

Paste Residence Time in a Spouted Bed Dryer. III: Effect of Paste Properties and Quality Interactions

The aim of this study was to evaluate the effects of paste properties on residence time during drying in a spouted bed dryer with inert bodies. The effect of paste solids content, surface tension, and viscosity on the residence time distribution and the mean residence times were studied using factorial experimental designs. The inert bodies used were glass and polyethylene beads. The mean residence times varied from 13.6 to 16.3 and 12.2 to 17.7 min for drying on glass and polyethylene beads, respectively. The analysis of variance showed that mean residence times significantly depended on solids content and surface tension for glass beads and also on viscosity for polyethylene beads. The residence time distributions for all conditions studied fitted well to the perfect mixing cell when applying the continuous stirred vessels in series model analysis. The powder density, flowability, and particle size depended on paste properties and inert type.     

Nisin expression production from Lactococcus lactis in milk whey medium

BACKGROUND: Nisin is a commercially available bacteriocin produced by Lactococcus lactis ATCC 11454 and used as a natural agent in the biopreservation of food. In the current investigation, milk whey, a byproduct from dairy industries was used as a fermentation substrate for the production of nisin. Lactococcus lactis ATCC 11454 was developed in a rotary shaker (30 °C/36 h/100 rpm) using two different media with milk whey (i) without filtration, pH 6.8, adjusted with NaOH 2 mol L^?1 and without pH adjustment, both autoclaved at 121 °C for 30 min, and (ii) filtrated (1.20 µm and 0.22 µm membrane filter). These cultures were transferred five times using 5 mL aliquots of broth culture for every new volume of the respective media. RESULTS: The results showed that culture media composed of milk whey without filtration supplied L. lactis its adaptation needs better than filtrated milk whey. Nisin titers, in milk whey without filtration (pH adjusted), was 11120.13 mg L^?1 in the second transfer, and up to 1628‐fold higher than the filtrated milk whey, 6.83 mg.L^?1 obtained in the first^t transfer. CONCLUSIONS: Biological processing of milk byproducts (milk whey) can be considered a profitable alternative, generating high‐value bioproducts and contributing to decreasing river disposals by dairy industries. Copyright © 2008 Society of Chemical Industry     

PhotoGeo: a photo digital library with spatial-temporal support and self-annotation

The recent popularity of digital cameras has posed a new problem: how to efficiently store and retrieve the very large number of digital photos captured and chaotically stored in multiple locations without any annotation. This paper proposes an infrastructure, called PhotoGeo, which aims at helping users with the people photo annotation, event photo annotation, storage and retrieval of personal digital photos. To achieve the desired objective, PhotoGeo uses new algorithms that make it possible to annotate photos with the key metadata to facilitate their retrieval, such as: the people who were shown in the photo (who); where it was captured (where); the date and time of capture (when); and the event that was captured. The paper concludes with a detailed evaluation of these algorithms.     

Performance of Green Solvents in the Extraction of Sunflower Oil from Enzyme-Treated Collets

The main goal of this work is to evaluate the extraction of sunflower oil from enzyme-treated collets using ethanol and isopropanol (IPA) as solvents. The sunflower collets are pretreated with the multienzyme complex Viscozyme L prior to solvent extraction by the Soxhlet method. The influence of the moisture content of the collets, pretreatment, processing time, and solvent type on the amount of total extracted material and the oil extraction efficiency is studied. Some quality parameters such as phospholipid content of the oil and chlorogenic acid content of the residual meal are also analyzed. At low moisture content (7%) the solvents exhibit similar oil extraction ability (98–99%), but with increasing moisture the extraction efficiency of ethanol decreases to about 85%, while no significant differences are observed for IPA. The enzymatic treatment increases the extraction efficiency for all times, especially for ethanol. It is observed that IPA is more efficient in the extraction compared to ethanol, and the amount of nonlipid material is reduced by ≈70%. In addition, the oil extracted with IPA have lower phospholipid content and the residual meal presents a higher chlorogenic acid content. Practical Applications:This work would contribute toward the use of green solvents in the extraction of sunflower oil from collets. Ethanol and isopropanol, used as solvents, present attractive advantages, including low toxicity, good operational security, as well as being obtained from a renewable source. The obtained data provide up-to-date information on the use of these alcohols in the extraction of sunflower oil from collets and the influence of operating conditions, such as moisture content, enzymatic pretreatment of the collets, and the extraction time. Information about oil and meal quality is also reported.     

Nickel Activation for Hydrogenolysis Reaction on USY Zeolite

The effects of the SAR (14 and 38) and of the methodology of introduction of nickel (wetness impregnation and ion exchange) on catalyst activation were investigated in Ni/USY model catalysts submitted to two activation treatments: reduction (A) and reduction/calcination/reduction, successively (B). the catalysts prepared by wetness impregnation, a marked increase in the catalytic activity after treatment B was observed. On the basis of the catalyst efficiency toward ethane hydrogenolysis, the lower SAR catalyst presents a threefold higher activity. On the contrary, the catalysts prepared by ion exchange, as well as a model catalyst prepared by wetness impregnation over a USY exhaustively exchanged with nickel ions, do not present measurable increasing of the catalytic activity under the same activation conditions. Monitoring the catalyst activation by EXAFS indicates the formation of nickel clusters in the impregnated catalysts after activation treatment B, which should be responsible for the high catalytic activity. However, TEM images reveal a bimodal particle size distribution, with large (ca. 20 nm) and small nickel particles. Temperature-programmed reduction performed under the same conditions of catalyst activation suggests that only the small nickel particles are activated under the experimental conditions adopted in this work.     

Removal of fulvic acid from aqueous media by adsorption onto modified vermiculite

Clay minerals are low cost materials that can be structurally modified and exploited for removal of natural organic matter from freshwaters. The present study shows that vermiculites modified by ion exchange with hexadecyltrimethylammonium or intercalation with poly(hydroxy iron) cations are potential adsorbents for removal of fulvic acid, whereas the adsorption on the raw clay mineral is negligible. The efficiency of the modified vermiculite was evaluated by measuring adsorption isotherms by the batch technique using initial fulvic acid concentrations between 2.5 and 50.0 mg L^− 1, with one hour of contact time. At least 94% of the fulvic acid initially present in a 20 mg L^− 1 solution was sorbed onto either the intercalated poly(hydroxy iron) cations or the organically modified vermiculite. Up to an initial concentration of 5.0 mg L^− 1 the adsorption is irreversible, and no quantifiable fulvic acid was measured in the desorption experiments. For initial fulvic acid concentrations between 10.0 and 50.0 mg L^− 1, desorption was between 2.3% and 4.9% for Fe(III) intercalated vermiculite, and between 1.4% and 9.2% for the organoclay. The adsorption percentages on intercalated poly(hydroxy iron) cations increased upon lowering pH and increasing the ionic strength, indicating the occurrence of strong binding mechanisms such as ligand exchange. Adsorption percentage of fulvic acid onto the organoclay also increased with lowering of pH, but in this case the adsorption percentages showed a small decrease at high ionic strength, suggesting that electrostatic attraction plays an important role in the adsorption process.