Technological and sensorial properties of liquid nitrogen ice cream enriched with protein from brewing waste (trub)

Debittered trub (brewing waste) is an important source of protein source (70.26%). Trub and whey protein were used for 5% protein enrichment of ice cream frozen by liquid nitrogen. Three formulations were elaborated: ice cream standard (ICS), ice cream with whey protein (ICW) and ice cream with trub (ICT). Chemical composition, rheological properties, texture, overrun, melting rate, scanning electron microscopy and a sensorial test were performed. Results showed that ICT presented a higher viscosity, obtained on the upward curve up to 6.76 Pa s⁻¹, consistency index (22.96 (Pa s⁻¹)ⁿ), hysteresis area (140.40 mPa s⁻¹) and hardness (31113.33 g) but a lower melting rate (0.38 g min⁻¹), overrun (13.92%) and sensorial acceptability than the other formulations. The addition of trub debittered for protein enrichment improved ice cream properties and demonstrated that it could be used as a food ingredient.     

Algorithmic Fairness in Mortgage Lending: from Absolute Conditions to Relational Trade-offs

Minds and Machines - To address the rising concern that algorithmic decision-making may reinforce discriminatory biases, researchers have proposed many notions of fairness and corresponding...     

Transporting Deformations of Face Emotions in the Shape Spaces: A Comparison of Different Approaches

Studying the changes of shape is a common concern in many scientific fields. We address here two problems: (1) quantifying the deformation between two given shapes and (2) transporting this deformation to morph a third shape. These operations can be done with or without point correspondence, depending on the availability of a surface matching algorithm, and on the type of mathematical procedure adopted. In computer vision, the re-targeting of emotions mapped on faces is a common application. We contrast here four different methods used for transporting the deformation toward a target once it was estimated upon the matching of two shapes. These methods come from very different fields such as computational anatomy, computer vision and biology. We used the large diffeomorphic deformation metric mapping and thin plate spline, in order to estimate deformations in a deformational trajectory of a human face experiencing different emotions. Then we use naive transport (NT), linear shift (LS), direct transport (DT) and fanning scheme (FS) to transport the estimated deformations toward four alien faces constituted by 240 homologous points and identifying a triangulation structure of 416 triangles. We used both local and global criteria for evaluating the performance of the 4 methods, e.g., the maintenance of the original deformation. We found DT, LS and FS very effective in recovering the original deformation while NT fails under several aspects in transporting the shape change. As the best method may differ depending on the application, we recommend carefully testing different methods in order to choose the best one for any specific application.

     

Effect of olive paste kneading process time on the overall quality of virgin olive oil

The influence of the olive paste malaxation time on the composition and the industrial output of oil was investigated. To this purpose, three Italian olive varieties (Leccino, Dritta, Caroleo) were processed with a centrifugal system for six malaxation periods (0, 15, 30, 45, 60 and 75 min). The concentrations of the majority of the oil constituents changed during the malaxation. However, these changes were not significant for all of them: the contents of β‐carotene, the major xanthophylls, chlorophylls a and b, pheophytins a and b in the oils increased progressively with increasing malaxing times, whereas the contents of simple and hydrolysable phenols (secoiridoid derivatives), o‐diphenols and total phenols decreased. A significant increase in total volatiles and green volatiles of the lipoxygenase cascade (C₆ aldehydes, C₆ alcohols, C₅ alcohols and C₅ carbonyls) was detected. An opposite trend was observed for the green C₆ esters. As a result, the global analytical quality, flavour, aroma and shelf‐life of the oils were negatively affected. The oil yield increased substantially up to 45 min of paste malaxation times. Beyond 60 min, the yields tended to decrease.     

Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.     

Self-organized porous TiO2 and ZrO2 produced by anodization

The present work investigates the electrochemical formation of self-organized high aspect ratio TiO₂ and ZrO₂ nanotube layers. The formation and growth of a self-organized porous layer can be achieved directly by anodization without any templates in fluoride containing electrolytes. The morphology of the porous layers is affected by the electrochemical conditions such as the electrolyte composition, the pH and the exact polarization treatment (such as the potential sweep rate from the open-circuit potential to the anodizing potential). For Ti, nanotube layers are formed with diameters varying from approx. 20 nm to 100 nm and lengths from approx. 0.25 μm to 2.5 μm depending on the electrolytes and pH. On the other hand, for Zr, tubes of 50 nm in diameter and up to approx. 17 μm in length can be grown—a key parameter in this case is the potential sweep rate. The large difference between Ti and Zr in the achievable thickness of nanotube layers indicates a difference in the growth mechanism which may be based on the different chemical dissolution rates of electrochemically formed oxides.     

Conformity Assessments and Post-market Monitoring: A Guide to the Role of Auditing in the Proposed European AI Regulation

The proposed European Artificial Intelligence Act (AIA) is the first attempt to elaborate a general legal framework for AI carried out by any major global economy. As such, the AIA is likely to become a point of reference in the larger discourse on how AI systems can (and should) be regulated. In this article, we describe and discuss the two primary enforcement mechanisms proposed in the AIA: the conformity assessments that providers of high-risk AI systems are expected to conduct, and the post-market monitoring plans that providers must establish to document the performance of high-risk AI systems throughout their lifetimes. We argue that the AIA can be interpreted as a proposal to establish a Europe-wide ecosystem for conducting AI auditing, albeit in other words. Our analysis offers two main contributions. First, by describing the enforcement mechanisms included in the AIA in terminology borrowed from existing literature on AI auditing, we help providers of AI systems understand how they can prove adherence to the requirements set out in the AIA in practice. Second, by examining the AIA from an auditing perspective, we seek to provide transferable lessons from previous research about how to refine further the regulatory approach outlined in the AIA. We conclude by highlighting seven aspects of the AIA where amendments (or simply clarifications) would be helpful. These include, above all, the need to translate vague concepts into verifiable criteria and to strengthen the institutional safeguards concerning conformity assessments based on internal checks.

     

Semantic fusion of laser and vision in pedestrian detection

Fusion of laser and vision in object detection has been accomplished by two main approaches: (1) independent integration of sensor-driven features or sensor-driven classifiers, or (2) a region of interest (ROI) is found by laser segmentation and an image classifier is used to name the projected ROI. Here, we propose a novel fusion approach based on semantic information, and embodied on many levels. Sensor fusion is based on spatial relationship of parts-based classifiers, being performed via a Markov logic network. The proposed system deals with partial segments, it is able to recover depth information even if the laser fails, and the integration is modeled through contextual information—characteristics not found on previous approaches. Experiments in pedestrian detection demonstrate the effectiveness of our method over data sets gathered in urban scenarios.     

Performance analysis of available bandwidth estimation tools for grid networks

Modern large-scale grid computing systems for processing advanced science and engineering applications rely on geographically distributed clusters. In such highly distributed environments, estimating the available bandwidth between clusters is a key issue for efficient task scheduling. We analyze the performance of two well known available bandwidth estimation tools, pathload and abget, with the aim of using them in grid environments. Differently than previous investigations (Jain et al., ; Shriram et al., in Passive and active network measurement: 6th international workshop, PAM 2005. Springer, Berlin, 2005), our experiments consider a series of relevant metrics such as accuracy of the estimation, convergence time, degree of intrusion in the grid links, and ability to handle multiple simultaneous estimations. No previous work has analyzed the use of available bandwidth tools for the derivation of efficient grid scheduling.