Off-Site Exposure to Respirable Aerosols Produced during the Disk-Incorporation of Class B Biosolids

Field experiments were conducted at a Class B biosolids land application site in central Arizona to measure, model, and source-track the off-site transport of aerosols emitted when biosolids were disk-incorporated into soils. Real-time PM10 monitoring provided time-resolved aerosol information sufficient for verifying both off-site concentration and off-site exposure time model results. Under the conditions considered and at a distance of 165?m from the aerosol source, biosolids disk-incorporation resulted in an intermittent exposure to biosolids-derived aerosol concentration between 15 and 40?μg/m3 and an inhalable biosolids dose between 2 and 8?μg. Transport modeling predicted that these doses will decrease with increasing wind speed. In addition, three DNA sequence-based biosolids source tracking methods were applied to aerosol samples and confirmed the presence of biosolids in aerosols at 5, 65, and 165?m from the aerosol source. Field measurements and modeling indicate that the nature of biosolids-derived aerosol exposure is a series of intermittent high concentration puffs, rather than a continuous low concentration.     

Jitter considerations in the design of a 10-Gb/s automatic gain control amplifier

The effects of noise on random jitter in multistage broad-band amplifiers are analyzed. Limiting amplifiers are compared to automatic gain control (AGC) amplifiers with different gain profiles. Results are presented for a 10-Gb/s AGC amplifier implemented in an SiGe process with f_T of 45 GHz. Active peaking techniques were used to achieve a maximum gain of 48 dB with 7.8 GHz of bandwidth. The amplifier demonstrates low jitter and less than 0.5 dB of peak-to-peak output amplitude variation over a 50-dB input amplitude range. It consumes 30 mW of power from a 3.3-V supply. The amplifier core occupies 0.1 mm² and requires no external components     

A model with length scales for composites with periodic structure. Steady state heat conduction problem

A new high-order model for analysing distribution of temperature in periodic composites is proposed. The original scalar elliptic problem with Y-periodic coefficients (Y is a cube) is replaced with a vectorial elliptic problem of constant coefficients. The unknown fields are: the averaged distribution of temperature and the vector field which stands for perturbation of the temperature within the cells of periodicity. The recovery of temperature in the original composite is given by the approximation: 0(x)=0(x) +h ^a (x/) _a (x) analogous with the first terms of the two-scale asymptotic expansion known from the homogenization theory. The functions h are defined as approximations of the solutions to the basic cell problems. In contrast to the two-scale expansion the expression for satisfies the boundary condition.     

Na+ and/or Cl− Toxicities Determine Salt Sensitivity in Soybean (Glycine max (L.) Merr.), Mungbean (Vigna radiata (L.) R. Wilczek), Cowpea (Vigna unguiculata (L.) Walp.), and Common Bean (Phaseolus vulgaris L.)

Grain legumes are important crops, but they are salt sensitive. This research dissected the responses of four (sub)tropical grain legumes to ionic components (Na⁺ and/or Cl⁻) of salt stress. Soybean, mungbean, cowpea, and common bean were subjected to NaCl, Na⁺ salts (without Cl⁻), Cl⁻ salts (without Na⁺), and a “high cation” negative control for 57 days. Growth, leaf gas exchange, and tissue ion concentrations were assessed at different growing stages. For soybean, NaCl and Na⁺ salts impaired seed dry mass (30% of control), more so than Cl⁻ salts (60% of control). All treatments impaired mungbean growth, with NaCl and Cl⁻ salt treatments affecting seed dry mass the most (2% of control). For cowpea, NaCl had the greatest adverse impact on seed dry mass (20% of control), while Na⁺ salts and Cl⁻ salts had similar intermediate effects (~45% of control). For common bean, NaCl had the greatest adverse effect on seed dry mass (4% of control), while Na⁺ salts and Cl⁻ salts impaired seed dry mass to a lesser extent (~45% of control). NaCl and Na⁺ salts (without Cl⁻) affected the photosynthesis (P_n) of soybean more than Cl⁻ salts (without Na⁺) (50% of control), while the reverse was true for mungbean. Na⁺ salts (without Cl⁻), Cl⁻ salts (without Na⁺), and NaCl had similar adverse effects on P_n of cowpea and common bean (~70% of control). In conclusion, salt sensitivity is predominantly determined by Na⁺ toxicity in soybean, Cl⁻ toxicity in mungbean, and both Na⁺ and Cl⁻ toxicity in cowpea and common bean.     

Toward Better Understanding of Task Difficulty during Physicians’ Interaction with Electronic Health Record System (EHRs)

ABSTRACT

The goal of this study was to assess the relationship of task difficulty and mental effort with performance during physicians’ interaction with electronic health records (EHRs). A total of 38 physicians were asked to identify abnormal results and take follow-up action to “close the loop” on care delivery. Task difficulty was quantified via task-flow strategies and computer mouse-click patterns. Mental effort was quantified using eye movements based on changes in pupillary dilations (task evoked pupillary response or TEPR) and blink rate. Performance was quantified based on commission errors (error vs. no-error). Results indicated that physicians had different task-flow strategies; however, with improved awareness of the patient status, they exhibited an optimal task-flow strategy. Overall, performance was related to task-flow strategies, computer mouse-click patterns, and blink rate, indicating that physicians had lower task-difficulty and experienced lower mental effort with improved awareness of patient follow-up status. This is an important finding demonstrating that task-flows are a dominant predictor of physician performance when comparing between EHR designs. On the contrary, mouse-click patterns and blink rate are both useful predictors of physician performance when assessment was done within an EHR.     

The Potential Role of SP-G as Surface Tension Regulator in Tear Film: From Molecular Simulations to Experimental Observations

The ocular surface is in constant interaction with the environment and with numerous pathogens. Therefore, complex mechanisms such as a stable tear film and local immune defense mechanisms are required to protect the eye. This study describes the detection, characterization, and putative role of surfactant protein G (SP-G/SFTA2) with respect to wound healing and surface activity. Bioinformatic, biochemical, and immunological methods were combined to elucidate the role of SP-G in tear film. The results show the presence of SP-G in ocular surface tissues and tear film (TF). Increased expression of SP-G was demonstrated in TF of patients with dry eye disease (DED). Addition of recombinant SP-G in combination with lipids led to an accelerated wound healing of human corneal cells as well as to a reduction of TF surface tension. Molecular modeling of TF suggest that SP-G may regulate tear film surface tension and improve its stability through specific interactions with lipids components of the tear film. In conclusion, SP-G is an ocular surface protein with putative wound healing properties that can also reduce the surface tension of the tear film.     

Über definierte Polyoxyäthylenderivate. V. [1] Stickstoffhaltige Polyoxyäthylene

On Defined Polyethylene Oxide Adducts. V. Nitrogen Containing Polyethylene Oxide Adducts The authors report on the synthesis and properties of longchain α-hydro-ω-N-alkylamino-polyoxyethylenes, there methylethers, and of α-hydro-ω-N-dodecylacetamidopolyoxyethylenes. Special surface properties as solubility, surface activity and micel formation are discussed.     

Effect of Ti,Nb, and Ti + Nb Coatings on the Bond Strength-Structure Relationship in Al/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Joints

There is a growing interest in metal-ceramic bonding for wide range of applications in electronic devices and high technology industry for fabrication of metal matrix composites and bonding of ceramic components to metals. The object of the work was to study the effect of Ti, Nb, and Ti + Nb thin films deposited by PVD method on alumina substrates on structure and bond strength properties of Al/Al₂O₃ joints. The joints were fabricated using the results of a wetting experiment and the sessile drop method at a temperature of 1223 K in a vacuum of 0.2 MPa for 30 min of contact. The structure of the metal/ceramic interface was investigated using scanning electron microscopy. The elemental distribution at the metal-ceramic interface was analyzed using energy dispersive x-ray spectroscopy. Transmission electron microscopy was also used to investigate some aspects of the metal/ceramic interface. The bond strength properties of joints were measured using shear test. The shear strength results demonstrated significant improvement of shear strength of Al/Al₂O₃ joints due to the application of Ti + Nb thin film on alumina substrate. Microstructural investigations of the interface indicated that Al/coating/Al₂O₃ couples have diffusion transition interface which influences the strengthening of these joints. A conclusion could be drawn that the presence of thin film layers changes the character of interaction and leads to the formation of new reaction products in the bonding layer.     

Toughening of syndiotactic polypropylene with chalk

We hypothesized that polymer crystal anisotropy is advantageous for toughening of polymer composites involving easy slip network of oriented crystalline layers around filler particles. To this end, composites of syndiotactic polypropylene (sPP) with high concentration of submicrometer calcium carbonate particles were prepared and examined because usual sPP crystals exhibit high packing anisotropy. The specific orientation of sPP lamellae around chalk grains was found, which is supposed to facilitate the plastic deformation of polymer matrices. The compression molded bars of the composite exhibited markedly higher Izod impact strength than those of neat sPP. Toughening was even enhanced in the injection molded composite, for which 4.5‐fold increase in the impact strength was achieved. Injection‐induced orientation of the disordered form I sPP crystals was enhanced in the composite. The injection molded tensile specimens exhibited also a good drawability. Debonding at chalk–sPP interface occurred both during the impact and tensile tests facilitating the plastic deformation of sPP matrix. Chalk did not have any significant influence on the thermal properties of the composites but it affected the rheological behavior, increasing the loss and storage moduli, and the viscosity. Highly filled sPP composite exhibited solid‐like behavior in a molten state with the storage modulus exceeding the loss modulus in the entire frequency range. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43651.     

Measurement of mechanical properties in a 316L stainless steel welded joint

The aim of this study was to measure the mechanical properties of weld material taken from a single weld bead laid down on a 316L steel plate. Due to the low available volume of weld material, microsamples with a total length of 5.5 mm were used. The Digital Image Correlation method (DIC), which enables measurement of mechanical properties of very small samples, was employed for the strain measurements in a uniaxial tensile test. Samples were cut out from three different zones of the specimen: plate, weld, and the heat affected zone. The material from heat affected zone showed the highest value of the Ultimate Tensile Strength (UTS) (580 ± 7 MPa) and yield strength (339 ± 6 MPa). Plate material had lower UTS (559 ± 5 MPa) and yield strength (304 ± 7 MPa). The lowest values of UTS (526 ± 6 MPa) and yield strength (291 ± 8 MPa) have been revealed for the weld. The values obtained for UTS, yield strength and elongation to failure for the plate material were compared with data obtained using standard test specimens. No significant differences between results obtained for the microsamples and standard samples have been found.