Reliability and scale effect in toughness of concrete structures

In the present work, the distribution of the random toughness characteristics (i.e. critical energy release rate, G_1c) has been evaluated on the basis of experimental observations. Fracture test results from three groups of geometrically similar concrete specimens of size (width×total depth×thickness), 420×420×50–1680×1680×200 mm³, made with different maximum aggregate size of 9.5, 19, 38, and 76 mm were analyzed using a recently proposed distribution of extremes. In applications of probability, it is important to use an appropriate distribution type and adequate techniques for estimating the parameters of distribution. In this study, a new type distribution of minima is employed for probability computations. It was noticed that the entropy of distribution increases with the crack length, i.e. the uncertainty of toughness, G_1c, value increases with crack length. A non-linear reduction of the maximum allowable splitting force with the defect size, a, was noticed. For large specimens, the maximum allowable splitting load is more sensitive to the required reliability level than that for small specimens. Reliability increases with aggregate size when all other conditions were constant.     

Impact Fracture of Thermally Tempered Glass Helicopter Windshields

In-service fracture of helicopter windshields was studied. Simulated catastrophic fracture tests were conducted by firing alumina and steel spheres onto stationary tempered and as-received glass panels. The results were studied by Hertzian analysis and modified Auerbach's relations. Thermally tempered glass shows much higher impact resistance than that estimated from superposition of residual stresses. Subcritical impact sites exhibit slow crack growth in tempered plates, eventually leading to fracture of the entire plate.     

Longitudinal bone mineral density changes in early rheumatoid arthritis

A prospective longitudinal study of patients with early RA was performed to examine the influence of disease duration, disease activity and physical activity on bone loss. Sixty-seven patients with non-steroid treated RA of less than 5 yr duration, including 16 patients with disease duration less than 6 months, had BMD measurements of the femoral neck and the lumbar spine over a 12-month period using dual energy X-ray absorptiometry. The BMD changes were compared with values from 72 control patients and were also correlated with serial measurements of disease activity (measured by the Stoke Index) and disability [measured by the Health Assessment Questionnaire (HAQ) score], at 3-monthly intervals over the 12-month period. No significant differences in BMD changes were found between RA patients and controls overall. Patients with disease duration of less than 6 months had significantly greater loss of BMD at the femoral neck (-3.9%, S.E.M. 1.5) than the remainder of the cohort (-0.2%, S.E.M. 0.7) (P = 0.02) and controls (-0.8%, S.E.M. 0.6). Lumbar spine BMD changes correlated with the initial Stoke Index (Rs-0.373, P = 0.01) but not mean Stoke Indices. There was no correlation of BMD changes with age or HAQ scores. These findings suggest that significant bone loss occurs within the first few months of disease in patients with RA.     

Targeting optimum resource allocation using reverse problem formulations and property clustering techniques

Decoupling the constitutive equations from the balance and constraint equations allows for reformulating a conventional forward problem into two reverse problems. The first reverse problem is the reverse of a simulation problem, where the process model is solved in terms of the constitutive (synthesis/design) variables instead of the process variables, thus providing the synthesis/design targets. The second reverse problem (reverse property prediction) solves the constitutive equations to identify unit operations, operating conditions and/or products by matching the synthesis/design targets. Visualization of the problem is achieved by employing recently developed property clustering techniques, which allows a high-dimensional problem to be visualized in two or three dimensions. The clusters by definition satisfy intra-stream and inter-stream conservation through linear “mixing” rules, which allows for the development of consistent additive rules along with their ternary representation.     

Microwave spectra of CD3OH methanol

The microwave spectrum of CD₃OH has been studied over the 8 to 58 GHz region, and numerousb-type transitions have been assigned. Many of these belong toP subbranches which descend to the microwave region from subband origins lying much higher in the far-infrared, pass through zero frequency, and return upward again. Others are members ofb-typeQ branches which extend across the region. As well, variousa-typeK-doublet lines arising as transitions directly across the split levels of asymmetry doublets have been identified.     

Water Pricing in Irrigated Agriculture

Access to water is viewed as a basic human right, a social necessity and a critical environmental resource in spite of the fact that water also has its own financial and economic values. Thus, the selection of set prices and pricing mechanisms addressing these contradicting views is remarkably complicated. On the other hand, water pricing is typically viewed as a good means to cover initial costs and sustain resources invested in water systems development, especially irrigated agriculture. Additionally, the cost of water services needs to be reasonable enough and linked to the amount of water consumed to encourage conservation. This paper illustrates criteria for equitable cost sharing, which include economic justification, efficiency and equity as well as users' acceptance. Elements of agricultural water pricing are also discussed. These elements comprise: the cost of water services, which is the total cost associated with irrigated agricultural systems development; the value of water, which reflects water's economic, social, environmental, cultural and religious values in the society; and the cost recovery mechanisms, which are the organizational and administrative measures to implement agreed upon policies to value water and services and make the collections.     

The effect of adjacent channel interference on the capacity of FDMAcellular systems

In FDMA cellular radio systems, the adjacent channel interference (ACI) is suppressed by the IF filter and also by a distance factor. Channels immediately adjacent to each other in frequency are assigned to different cells and, as such, the distance plays a role in reducing their mutual interference. The authors study the feasibility of optimizing the frequency spacing between carriers such that the combined effect of distance and IF filter will be enough to control the interference while allowing the maximum number of channels in a given bandwidth. They also study the decision feedback equalizer (DFE) as a means to reduce any excess ACI that results from reducing the channel spacing. The paper starts with a model that estimates the cumulative probability density of the signal to adjacent channel interference ratio (SIR) as a function of the channel spacing. They then present the results of a computer simulation study to estimate the performance of DFE in mitigating the effect of ACI. The results indicate that, under the conditions of slow flat fading and selection diversity, the DFE is very effective in reducing the effect of excess ACI interference which allows for a considerable reduction in the frequency spacing