Effect of microwave heating on quality and mycoflora of sorghum grain

Sorghum (cv. Maldandi M35-1) was modified to 12, 14 and 16% moisture content (m.c.) and heat-treated with microwave energy at 3 levels, for 30 sec (=4.5, 9 and 18 kJ), and 60 sec (=9, 18 and 36 kJ). The effect of microwave heating on rise and subsequent fall in grain temperature, reduction in m.c. and quality characteristics including germination, seedling dry matter, free fatty acids (FFA) and contaminant fungi was determined. The temperature attained and the moisture loss in the sorghum grain was affected by grain m.c. and the time of exposure. At the lowest and highest microwave treatment level grain temperatures reached 30–40°C and 90–101°C, respectively. However, a 60-sec treatment at the highest energy level was lethal for the grain, particularly at 14 and 16% m.c. The FFA values were unaffected by microwave treatment. Statistical analyses showed that the microwave power level and time individually, and power level × time interactions were significant for most quality characteristics. The fungi present most abundantly on the sorghum grain were Eurotium spp., Aspergillus candidus, A. niger and Penicillium spp. Increasing m.c. and microwave heating resulted in elimination of most fungi after a 30-sec exposure time. With a 60-sec exposure period, practically all fungi were eliminated from the grain.     

Structural and magnetic properties of Co1+ySnyFe2-2y-xCrxO4 ferrite system

The samples of the series Co_1+ySn_yFe_{2- 2y- x}Cr_xO₄ ferrites with x = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5 and y = 0.05, were prepared by the usual double sintering ceramic technique. The single- phase spinel structure of the samples was confirmed by using X- ray diffractometry technique. The lattice parameter ’a’ with an accuracy of ± 0.002 Å were determined using Bragg peaks of XRD pattern. The lattice parameter ’a’ decreases with concentration, x, which is due to the difference in the ionic radii of Cr³⁺ and Fe³⁺ ions. The X- ray intensity calculations were carried out in order to determine the possible cation distribution amongst tetrahedral (A) and octahedral [B] sites. The X- ray intensity calculations show Cr³⁺ ions occupying B site. The saturation magnetization, σ_s, and magneton number, n_B (the saturation magnetization per formula unit), measured at 300 K determined from high field hysteresis loop technique decrease with increase in concentration, x, suggesting a decrease in ferrimagnetic behaviour. Thermal variation of low field a.c. susceptibility measurements from room temperature to about 800 K exhibits almost normal ferrimagnetic behaviour and the Curie temperature, T_C determined from a.c. susceptibility data decreases with increase in x.

     

Directionality from anisotropic phonon production in solid state dark matter detection

We present results from computer simulations of the events immediately following the scattering of a dark matter particle off a nucleus in a crystal detector. Our simulations show that with NaF as the target, the recoil produces solitary waves that decay slowly, resulting in a narrow wake of phonons. The phonon wake allows a determination of direction of the nuclear recoil.     

Deep neural network architectures for dysarthric speech analysis and recognition

Neural Computing and Applications - This paper investigates the ability of deep neural networks (DNNs) to improve the automatic recognition of dysarthric speech through the use of convolutional...     

High-Thermal-Conductivity Aluminum Nitride Ceramics: The Effect of Thermodynamic, Kinetic, and Microstructural Factors

Improvement in the thermal conductivity of aluminum nitride (AlN) can be realized by additives that have a high thermodynamic affinity toward alumina (Al₂O₃), as is clearly demonstrated in the aluminum nitride-yttria (AlN-Y₂O₃) system. A wide variety of lanthanide dopants are compared at equimolar lanthanide oxide:alumina (Ln₂O₃: Al₂O₃, where Ln is a lanthanide element) ratios, with samaria (Sm₂O₃) and lutetia (Lu₂O₃) being the dopants that give the highest- and lowest-thermal-conductivity AlN composites, respectively. The choice of the sintering aid and the dopant level is much more important than the microstructure that evolves during sintering. A contiguous AlN phase provides rapid heat conduction paths, even at short sintering times. AlN contiguity decreases slightly as the annealing times increase in the range of 1–1000 min at 1850°C. However, a substantial increase in thermal conductivity results, because of purification of AlN grains by dissolution-reprecipitation and bulk diffusion. Removal of grain-boundary phases, with a concurrent increase in AlN contiguity, occurs at high annealing temperatures or at long times and is a natural consequence of high dihedral angles (poor wetting) in liquidphase-sintered AlN ceramics.     

Creep and Stress Rupture Behavior of an Advanced Silicon Nitride: Part I, Experimental Observations

Cylindrical buttuohead specimens of an advanced silicon nitride were tested in uniaxial tension at temperatures between 1422 and 1673 K. In the range 1477 to 1673 K, creep deformation was reliably measured using high-temperature contact probe extensometry. Extensive scanning and transmission electron microscopy has revealed the formation of lenticular cavities at two-grain junctions at all temperatures (1422–1673 K) and extensive triple-junction cavitation occurring at the higher temperatures (1644–1673 K). Cavitation is believed to be part of the net creep process. The stress rupture data show stratification of the Monkman–Grant lines with respect to temperature. Failure strain increased with increase in rupture time or temperature, or decrease in stress. Fractography showed that final failure occurred by subcritical crack growth in all specimens.     

The evaporation signal from α particles stopped in superfluid helium

Alpha particles stopped in a 3 liter volume of liquid helium at 30 mK are observed by the calorimetric detection of helium atoms evaporated from the free surface of the liquid. Quantum evaporation of the helium is produced by the rotons that are created by the particle. While the energy spectrum of the 5.5 MeV 's from the²⁴¹Am source has a width of less than 0.5%, the energy distribution of the observed evaporation signals extends from the low energy threshold of several keV up to a maximum of several 100 keV, depending on geometrical factors and the collection area of the calorimeter. The origin of the observed distribution may result in part from the presence of the substrate and a dependence on the direction of the track of the particle. A simple model of the generation of rotons by the particle will be discussed.     

The Solutions on One-Dimensional Dirac Oscillator with Energy-Dependent Potentials and Their Effects on the Shannon and Fisher Quantities of Quantum Information Theory

Journal of Low Temperature Physics - In this paper, we focus, at first, on the exact solutions on the one-dimensional Dirac oscillator with the energy-dependent potentials. Then, the influence of...     

Alternating current electrophoretic deposition of Saccharomyces cerevisiae cells and the viability of the deposited biofilm in ethanol production

In this work, we have explored the possibility of using asymmetrical alternating current electrophoretic deposition (AC-EPD) process, which we have previously reported for enzyme deposition, to immobilize Saccharomyces cerevisiae (S. cerevisiae) cells onto stainless steel substrates. The deposition of S. cerevisiae cells at 30 Hz and 200 V_p-p permits the formation of 89 ± 16 μm thick cell layers in 30 min. The mass of the deposited cells is shown to increase quasi-linearly with the deposition time and the applied amplitude. In order to increase the mechanical stability of the immobilized cells, a thin layer of polyurethane was applied after the AC-EPD of S. cerevisiae cells. The viability of the immobilized cells was tested in the production of ethanol. The results showed that the fermentation process with the immobilized S. cerevisiae cells is more efficient than the fermentation carried out with similarly treated free cells.     

Application of electrostatic precipitator in collection of smoke particles from hospital wastes combustion

The paper reports the development and implementation of a cost-effective electrostatic precipitator (ESP) prototype for the medical wastes incinerator of university hospital centre (CHU) of Sidi-Bel-Abbes, using a water washing system for cleaning electrodes. The impact of medical waste incineration on human health is a topical debate. The incineration process is a safe mode of disposal [OK] of such waste, but it is not an effective solution and needs a pollution control system. Generally, in Africa, cost is the major constraint for manufacturers and users. A half-scale ESP model was initially used for an experimental study in the laboratory. Thereafter, a full-scale model was produced and installed for the incinerator based on the optimal values obtained from this preliminary study.