Inhibition of sulfide on the simultaneous removal of nitrate and p‐cresol by a denitrifying sludge

BACKGROUND: Many industrial discharges, such as those generated from petrochemical refineries, contain large amounts of sulfurous, nitrogenous and organic contaminants. Denitrification has emerged as a suitable technology for the simultaneous removal of these pollutants in a single reactor unit; however, more evidence is demanded to clarify the limitations of denitrification on the simultaneous removal of sulfide and phenolic contaminants and to optimize the biological process. The aim of this study was to evaluate the capacity of a denitrifying sludge to simultaneously convert sulfide and p‐cresol via denitrification. RESULTS: Sulfide was the preferred electron donor over p‐cresol, imposing a 5 h lag phase (required for complete sulfide removal) on organotrophic denitrification. Addition of sulfide (20 mg S^2? L^?1) to p‐cresol‐amended denitrifying cultures also decreased the reduction rate of nitrate and nitrite, as well as the production rate of nitrogen gas. Nitrite reduction rate was the most affected step by sulfide, decreasing from 35 to 21 mg N (g VSS d)^?1. A synergistic inhibitory effect of nitrate and sulfide was also observed on nitrite reduction. Despite the effects of sulfide on the respiratory rates monitored, complete removal of nitrate, sulfide and p‐cresol could be achieved after 48 h of incubation. CONCLUSION: Our results suggest that simultaneous removal of sulfide and p‐cresol could be achieved in denitrifying reactors, but a large hydraulic residence time may be required to sustain an efficient process due to inhibitory effects of sulfide. Copyright © 2008 Society of Chemical Industry     

On transitive orientations with restricted covering graphs

We consider the problem of finding a transitive orientation of a comparability graph, such that the edge set of its covering graph contains a given subset of edges. We propose a solution which employs the classical technique of modular tree decomposition. The method leads to a polynomial time algorithm to construct such an orientation or report that it does not exist.     

Nitrogen dynamics during till and no-till pasture restoration sequences in Rondônia,Brazil

The clearing of tropical rain forest in the Amazon basin has created large areas of cattle pasture that are now declining in productivity. Practices adopted by ranchers to restore productivity to degraded pastures have the potential to alter soil N availability and gaseous N losses from soils. We examined how soil inorganic N pools, net N mineralization and net nitrification rates, nitrification potential and NO and N₂O emissions from soils of a degraded pasture responded to the following restoration treatments: (1) soil tillage followed by replanting of grass and fertilization, (2) no-till application of non-selective herbicide, planting of rice, harvest followed by no-till replanting of grass and fertilization, and (3) the same no-till sequence with soybeans instead of rice. Tillage increased soil NH₄⁺ and NO₃^? pools but NH₄⁺ and NO₃^? pools remained relatively constant in the control and no-till treatments. Cumulative rates of net N mineralization and net nitrification during the first 6 months after treatment varied widely but were hightest in the tilled treatment. Emissions of NO and N₂O fluxes increased with tillage and with N fertilization. There were no clear relationships among rates of N fertilizer application, net N mineralization, net nitrification, NO, N₂O and total N oxide emissions. Our results indicate that pasture restoration sequences involving tilling and fertilizing will increase emissions of N oxides, but the magnitude of the increase is likely to differ based on timing of fertilizer application relative to the presence of plants and the magnitude of plant N demand. Emissions of N oxides appear to be decreased by the use of restoration sequences that minimize reductions in pasture grass cover.     

Development of high-performance liquid chromatography criteria for determination of grades of commercial olive oils. Part I. The normal ranges for the triacylglycerols

Criteria for authentic olive oils were developed from isocratic high-performance liquid chromatography analyses of 99 olive oils from the major Mediterranean producers in the 1983–1986 crop years. Authentic olive oils include extra virgin, virgin and pure or refined oils, but exclude all reesterified and adulterated oils. The extra virgin through pure grades will have a combined area for the LOO (C_18:2C_18:1C_18:1), LOP (C_18:2C_18:1C_16:0), OOO (C_18:1C_18:1C_18:1), POO (C_16:0C_18:1C_18:1), POP (C_16:0C_18:1C_18:1), and SOO (C_18:0C_18:1C_18:1) peaks between 82.0 and 92.6% of the total area (L, linoleic; O, oleic; P, palmitic; S, stearic). Authentic oils will have ratios of LOO/LOP and OOO/POO that coincide with a line defined by OOO/POO=0.7844(LOO/LOP)+0.0968; correlation coefficient is 0.885. Authentic oils will not have a trilinolein (LLL) peak over 0.5% in area. Neither triolein (OOO) nor any other single peak suffices to characterize an olive oil sample as one of the authentic grades.     

Rheological and morphological properties of high‐density polyethylene and poly(ethylene–octene) blends

The rheological and morphological properties of blends based on high‐density polyethylene (HDPE) and a commercial ethylene–octene copolymer (EOC) produced by metallocene technology were investigated. The rheological properties were evaluated in steady and dynamic shear experiments at 190°C in shear rates ranging from 90 s^?1 to 1500 s^?1 and frequency range between 10^?1 rad/s and 10² rad/s, respectively. These blends presented a high level of homogeneity in the molten state and rheological behavior was generally intermediate to those of the pure components. Scanning electron microscopy (SEM) showed that the blends exhibit dispersed morphologies with EOC domains distributed homogeneously and with particle size inferior to 2 μm. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2240–2246, 2002     

Analytic expressions for the isosteric heat of adsorption from adsorption isotherm models and two-dimensional SAFT-VR equation of state

The isosteric heat of adsorption is an important thermodynamic property used to characterize and optimize adsorption processes. In this work, analytic expressions for isosteric heats of adsorption are derived for a collection of commonly used isotherm models and a two-dimensional molecular equation of state based on the SAFT-VR approach. The use of these expressions is presented with an example of adsorption of nitrous oxide, N₂O, on biochar, which is a waste biomass charcoal that exhibits high adsorption potential. The results show that accurate fitting of the adsorption isotherms leads to consistent results obtained with different approaches; however, the predicted isosteric heat of adsorption exhibits strong variations in the regions where experimental data is insufficient such in the region of low pressure/low coverage. Convergence on the prediction of the isosteric heat of adsorption by the different models is only observed in the region where no extrapolation of experimental data is needed.     

Optics clustered to output unique solutions: a multi-laser facility for combined single molecule and ensemble microscopy

Optics clustered to output unique solutions (OCTOPUS) is a microscopy platform that combines single molecule and ensemble imaging methodologies. A novel aspect of OCTOPUS is its laser excitation system, which consists of a central core of interlocked continuous wave and pulsed laser sources, launched into optical fibres and linked via laser combiners. Fibres are plugged into wall-mounted patch panels that reach microscopy end-stations in adjacent rooms. This allows multiple tailor-made combinations of laser colours and time characteristics to be shared by different end-stations minimising the need for laser duplications. This setup brings significant benefits in terms of cost effectiveness, ease of operation, and user safety. The modular nature of OCTOPUS also facilitates the addition of new techniques as required, allowing the use of existing lasers in new microscopes while retaining the ability to run the established parts of the facility. To date, techniques interlinked are multi-photon/multicolour confocal fluorescence lifetime imaging for several modalities of fluorescence resonance energy transfer (FRET) and time-resolved anisotropy, total internal reflection fluorescence, single molecule imaging of single pair FRET, single molecule fluorescence polarisation, particle tracking, and optical tweezers. Here, we use a well-studied system, the epidermal growth factor receptor network, to illustrate how OCTOPUS can aid in the investigation of complex biological phenomena.     

A particular approach for the Three-dimensional Packing Problem with additional constraints

This paper focuses on a restrained concretization of the general NP-hard Container Loading Problem that arises from a real world application. This particular problem can be informally described as: given different sets of bins and boxes, find the packing of the boxes into the smallest number of bins obeying some additional restrictions on the placement. The mathematical programming formulation that appears to better model this application is the Three-dimensional Bin-Packing Problem (3D-BPP) which is no more than an extension of the classic Bin-Packing Problem to the orthogonal packing of solid objects.We present an alternative non-linear formulation for the 3D-BPP version as well as new designed heuristic algorithms (CPBOX and BOXCP) for the approximation of the optimal solution using boxes and bins of heterogeneous dimensions. Moreover, we also present a heuristic specifically designed to work under very particular storage application restrictions. The numerical results indicate that all of these new heuristics have good performance standards especially when applied to replications of real input data.