Learning Organizations in Construction

The transformation of organizations from production-oriented entities to proactive learning entities that continuously leverage the knowledge of the workforce is a primary objective of management researchers. This focus has significant relevance to the construction industry where production-related research has predominantly overshadowed organizational development research. As one effort to change this emphasis, the writers present a research effort designed to study current organization learning techniques and technologies fielded by organizations both inside and outside of the construction industry. Through a series of exploratory case studies, the writers developed a maturity model together with the Construction Industry Institute that provides construction organizations with a framework for developing a learning organization culture. The maturity model focuses on learning organization characteristics of leadership, processes and infrastructure, communication/collaboration, education, and culture at the organization, community, and individual levels. This paper introduces the results of that effort including a presentation of the learning organization maturity model, framework application, and the overall characteristics of a learning organization.     

Familial hypokalemic periodic paralysis. Clinical, diagnostic and therapeutic aspects

A model of induced lactation was modified to examine the effects of bovine prolactin (bPRL) and bovine placental lactogen (bPL) on mammary growth and differentiation. Thirty-two peripubertal, non-pregnant Holstein heifers were given daily s.c. injections of oestradiol (0.05 mg/kg) and progesterone (0.25 mg/kg) for 7 days to initiate mammary growth. Treatment with bromocriptine (40 mg/3 days) reduced serum PRL concentrations to approximately 25% of pretreatment levels, for the duration of the study. On the day following the last steroid injection, groups of eight heifers were given twice daily s.c. injections of either saline (negative control), recombinant bPRL (rbPRL; 80 mg/day) or recombinant bPL (rbPL; 80 and 160 mg/day) for 7 days. At the end of this period (day 15), growth and differentiation of the mammary glands were assessed. Treatment with rbPL increased total mammary DNA above control value by 50 and 60% for the 80 and 160 mg/day doses respectively. However, total DNA was not different for the control and rbPRL-treated groups. The blood serum concentration of alpha-lactalbumin was measured daily throughout the study and used as an index of mammary differentiation. Both rbPRL and rbPL stimulated mammary differentiation (i.e. induction of milk synthesis), although rbPRL appeared to be more potent than rbPL. These results indicate that rbPL is lactogenic in vivo and strongly suggest that bPL is a mammary mitogen.     

Consistent Viewing and Interaction for Multiple Users in Projection-Based VR Systems

In projection-based Virtual Reality (VR) systems, typically only one headtracked user views stereo images rendered from the correct view position. For other users, who are presented a distorted image, moving with the first user's head motion, it is difficult to correctly view and interact with 3D objects in the virtual environment. In close-range VR systems, such as the Virtual Workbench, distortion effects are especially large because objects are within close range and users are relatively far apart. On these systems, multi-user collaboration proves to be difficult. In this paper, we analyze the problem and describe a novel, easy to implement method to prevent and reduce image distortion and its negative effects on close-range interaction task performance. First, our method combines a shared camera model and view distortion compensation. It minimizes the overall distortion for each user, while important user-personal objects such as interaction cursors, rays and controls remain distortion-free. Second, our method retains co-location for interaction techniques to make interaction more consistent. We performed a user experiment on our Virtual Workbench to analyze user performance under distorted view conditions with and without the use of our method. Our findings demonstrate the negative impact of view distortion on task performance and the positive effect our method introduces. This indicates that our method can enhance the multi-user collaboration experience on close-range, projection-based VR systems.     

Terrain objects, their dynamics and their monitoring by theintegration of GIS and remote sensing

Geometrical and thematic data about terrain objects stored in a geographical information system (GIS) can be kept up-to-date by using remote sensing (RS) data. Geometrical and thematic data can be extracted from the RS data by segmentation and classification techniques respectively. The possibilities and reliability of the information extraction from RS data can be improved by the use of ancillary data and knowledge about the terrain objects. Object classification and aggregation hierarchies can be used to describe relationships between terrain objects; the categorization of the different types of terrain object dynamics that is presented will be based partly on these hierarchical relationships. Object models will be applied in a case study in which both the field geometry (field boundaries) and the crop type of agricultural fields are updated from a Landsat TM image. For that purpose, a three-stage strategy has been developed. In the first stage, the results of an edge detection procedure are integrated with fixed geometrical data already contained in the GIS by using knowledge about the aggregation structure and shape of the fields. In the next stage, the crop type of the fields is determined by means of object-based classification. Finally, conditional merging is performed to solve the problem of oversegmentation. The resulting field geometry was found to agree for 87% with the field geometry as determined by a photo-interpreter     

Burst Detection by Water Demand Nowcasting Based on Exogenous Sensors

Bursts of drinking water pipes not only cause loss of drinking water, but also damage below and above ground infrastructure. Short-term water demand forecasting is a valuable tool in burst detection, as deviations between the forecast and actual water demand may indicate a new burst. Many of burst detection methods struggle with false positives due to non-seasonal water consumption as a result of e.g. environmental, economic or demographic exogenous influences, such as weather, holidays, festivities or pandemics. Finding a robust alternative that reduces the false positive rate of burst detection and does not rely on data from exogenous processes is essential. We present such a burst detection method, based on Bayesian ridge regression and Random Sample Consensus. Our exogenous nowcasting method relies on signals of all nearby flow and pressure sensors in the distribution net with the aim to reduce the false positive rate. The method requires neither data of exogenous processes, nor extensive historical data, but only requires one week of historical data per flow/pressure sensor. The exogenous nowcasting method is compared with a common water demand forecasting method for burst detection and shows sufficiently higher Nash-Sutcliffe model efficiencies of 82.7% - 90.6% compared to 57.9% - 77.7%, respectively. These efficiency ranges indicate a more accurate water demand prediction, resulting in more precise burst detection.

     

Vocabulary development at home: a multimedia elaborated picture supporting parent–toddler interaction

Some children enter elementary school with large vocabulary delays, which negatively influence their later school performance. A rich home language environment can support vocabulary development through frequent high‐quality parent–toddler interaction. Elaborated picture home activities can support this rich home language environment. This study compares the effects of a multimedia versus a paper elaborated picture on the parent–toddler interaction and toddlers' vocabulary development. In a within‐subjects design, 20 toddlers (age 3–4) discussed a multimedia and a paper elaborated picture with a parent. Results showed that toddlers knew significantly more words (receptively and expressively) after both activities. Moreover, the improvement in receptive vocabulary knowledge was significantly larger with the multimedia elaborated picture compared with the paper‐based picture. In addition, both parent and toddler engaged in a significant higher level of decontextualized language in response to multimedia. The present study shows that multimedia elaborated pictures can support parents at home to engage in a parent–toddler interaction that is richer and supports the development of receptive vocabulary more compared with traditional paper‐based activities. In the future, multimedia‐based home activities for toddlers' vocabulary development, supporting parent–child interaction, can be offered relatively cheap and easily via internet.     

Stress and strain analysis in tar-containing antiskid runways using finite element models

Tar-containing antiskid surface layers are widely used for runways in airfields. Antiskid mixtures with tar-containing binders show apart from a high skid resistance, excellent adhesion of the antiskid layer to the underlying layer, and a extremely high fuel resistance, which make them more suitable for airfields than other materials. However, tar-containing antiskid has a high Polycyclic Aromatic Hydrocarbons (or PAHs) content, which makes them toxic to humans. Because of these environmental concerns, tar-containing antiskid runways are not allowed anymore after 2010 in the Netherlands. Therefore alternatives need to be developed.In order to be able to develop alternatives, the stress and strain distributions in a tar-containing antiskid surface layer should be evaluated. Structural characteristics and rheology properties of tar-containing antiskid surface layers were studied by means of nano CT scanning and Dynamic Shear Rheometer measurements, respectively. Using these results, two finite element models were developed. Stress and strain distributions in the antiskid layer under taking off and landing aircrafts were determined by means of these models. The results indicate that the stiffness of the binder has a slightly influence on the principal stress and strain. Finite element modeling (FEM) models can be developed for alternatives to tar-containing binder.     

Strategies for overlapping dependent design activities

Overlapping activities that are traditionally performed in a sequential manner can significantly reduce project delivery times. Overlapping, however, should be approached in a systematic manner to reduce the costs and risks. Information gathered from sector‐based case studies and from the manufacturing domain suggest a formalised framework for identifying overlapping opportunities and strategies can be successfully implemented for infrastructure projects. This framework considers activity characteristics, such as evolution of upstream information and sensitivity of downstream activities to changes in upstream information, to identify appropriate overlapping strategies. Overlapping strategies, such as early freezing of design criteria, overdesign, and early release of preliminary information, are selected based on activity characteristics. These strategies operate either by speeding up the evolution of upstream information or by reducing the sensitivity of downstream activities. By aligning overlapping strategies with activity characteristics, project managers can make better decisions on when and how much to overlap sequential activities to reduce overall project delivery time.     

LC–MS/MS multi-method for mycotoxins after single extraction,with validation data for peanut,pistachio, wheat,maize, cornflakes,raisins and figs

Mycotoxin analysis is usually carried out by high performance liquid chromatography after immunoaffinity column cleanup or in enzyme-linked immunosorbent assay tests. These methods normally involve determination of single compounds only. EU legislation already exists for the aflatoxins, ochratoxin A and patulin in food, and legislation will come into force for deoxynivalenol, zearalenone and the fumonisins in 2007. To enforce the various legal limits, it would be preferable to determine all mycotoxins by routine analysis in different types of matrices in one single extract. This would also be advantageous for HACCP control purposes. For this reason, a multi-method was developed with which 33 mycotoxins in various products could be analysed simultaneously. The mycotoxins were extracted with an acetonitrile/water mixture, diluted with water and then directly injected into a LC–MS/MS system. The mycotoxins were separated by reversed-phase HPLC and detected using an electrospray ionisation interface (ESI) and tandem MS, using MRM in the positive ion mode, to increase specificity for quality control. The following mycotoxins could be analysed in a single 30-min run: Aflatoxins B₁, B₂, G₁ and G₂, ochratoxin A, deoxynivalenol, zearalenone, T-2 toxin, HT-2 toxin, α-zearalenol, α-zearalanol, β-zearalanol, sterigmatocystin, cyclopiazonic acid, penicillic acid, fumonisins B₁, B₂ and B₃, diacetoxyscirpenol, 3- and 15-acetyl-deoxynivalenol, zearalanone, ergotamin, ergocornin, ergocristin, α-ergocryptin, citrinin, roquefortin C, fusarenone X, nivalenol, mycophenolic acid, alternariol and alternariol monomethyl ether. The limit of quantification for the aflatoxins and ochratoxin A was 1.0 µg kg^?1 and for deoxynivalenol 50 µg kg^?1. The quantification limits for the other mycotoxins were in the range 10–200 µg kg^?1. The matrix effect and validation data are presented for between 13 and 24 mycotoxins in peanuts, pistachios, wheat, maize, cornflakes, raisins and figs. The method has been compared with the official EU method for the determination of aflatoxins in food and relevant FAPAS rounds. The multi-mycotoxin method has been proven by the detection of more than one mycotoxin in maize, buckwheat, figs and nuts. The LC–MS/MS technique has also been applied to baby food, which is subject to lower limits for aflatoxin B₁ and ochratoxin A, ergot alkaloids in naturally contaminated rye and freeze-dried silage samples.