Output feedback controller for polytopic systems exploiting the direct searching of the design space

This paper deals with the problem of designing a robust static output feedback controller for polytopic systems. The current research that tackled this problem is mainly based on LMI method, which is conservative by nature. In this paper, a novel approach is proposed, which considers the design space of the controller parameters and iteratively partitions the space to small simplexes. Then, by assessing the stability in each simplex, the solution space for design parameters is directly determined. It has been theoretically proved that, if there exists a feasible solution in the design space, the algorithm can find it. To validate the result of the proposed approach, comparative simulation examples are given to illustrate the performance of the design methodology as compared to those of previous approaches.     

Statistical Optimization for Production of Light Olefins in a Fluidized‐Bed Reactor

The methanol‐to‐olefins reaction (MTO) was studied in a small‐scale fluidized‐bed reactor over synthesized silicoaluminophosphate (SAPO‐34) catalysts. Mesoporous nanocrystalline SAPO‐34 molecular sieves were synthesized hydrothermally by ultrasonic and microwave‐assisted aging processes in the presence of hexadecyltrimethylammonium bromide (CTAB) and tetradecyldimethyl(3‐trimethoxysilylpropyl)ammonium chloride (TPOAC) as surfactant agents. The Box‐Behnken experimental design method was applied to determine the optimum operating parameters of this process conducted in the fluidized‐bed reactor. The optimum conditions in terms of reaction temperature, ratio of inlet gas velocity to minimum fluidizing velocity, and MeOH weight fraction were evaluated.     

Ni-Rhodanine Complex Supported on FSM-16 as Mesoporous Silica Support: Synthesis,Characterization and Application in Synthesis of Tri and Tetrasubstituted Imidazoles and 3,4-Dihydropyrimidine-2-(1H)-Ones

A new, efficient and recoverable heterogeneous catalyst was successfully synthesized by functionalization of mesoporous silica FSM-16. The FSM-16/CPTMS-Rh-     

Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Access point selection in the network of Internet of things (IoT) considering the strategic behavior of the things and users

The Journal of Supercomputing - With the expansion in the use of IoT, increasing the efficiency of these networks has become even more significant. Objects need reliable communications at suitable...     

Endothelin receptors mediating vasoconstriction in rat pressurized small arteries

The effects of endothelin-1 (ET-1), a nonselective ETA and ETB receptor agonist, and sarafotoxin S6c, a selective ETB agonist, were investigated in the presence and absence of BQ123 and BQ788, ETA- and ETB-selective antagonists, respectively, in rat mesenteric small arteries, using a perfusion pressurized arteriograph in which segments of vessels were cannulated and exposed to constant pressure and flow. ET-1 (10(-13)-10(-7) M) induced vasoconstriction in both intact and endothelium-denuded arteries in a concentration-dependent manner. BQ123 (10(-7) and 10(-6) M) inhibited the effect of ET-1, displacing the concentration-response curve to the right in a concentration-dependent manner. The effect of ET-1 was not significantly affected by BQ788 (10(-7) and 10(-6) M), a selective antagonist of ETB receptors. Sarafotoxin S6c (10(-11)-10(-7) M) also induced a slight concentration-dependent vasoconstriction. The effect of sarafotoxin S6c (10(-8) M) was inhibited by the ETB-selective antagonist BQ788 (10(-7) M), but was not significantly changed by BQ123 (10(-7) M). Vasoconstriction induced by sarafotoxin S6c (10(-8) M) in a single bolus concentration was significantly greater than the contraction induced by the same concentration as part of a cumulative concentration-response curve, indicating desensitization or downregulation of ETB receptors during the latter. Repeated application of single concentrations of sarafotoxin S6c (10(-8) M) caused progressively smaller contraction of arteries. These results show the existence of both ETA and ETB vasoconstrictor receptors located on smooth muscle of small arteries. They also show that ETB receptors induce a smaller constrictor effect, and rapidly undergo desensitization after sustained or repeated activation.     

Synthesis of poly(methyl methacrylate)/silica nanocomposite through emulsion polymerization using dimethylaminoethyl methacrylate

Polymer/Silica nanocomposite latex particles were prepared by emulsion polymerization of methyl methacrylate (MMA) with dimethylaminoethyl methacrylate (DM). The reaction was performed using a nonionic surfactant and in the presence of silica nanoparticles as the seed. The polymer‐coated silica nanoparticles with polymer content and number average particle sizes ranged from 32 to 93 wt % and 114–310 nm, respectively, were obtained depending on reaction conditions. Influences of some synthetic conditions such as MMA, DM, surfactant concentration, and the nature of initiator on the coating of the silica nanoparticles were studied. Electrostatic attraction between anionic surface of silica beads and cationic amino groups of DM is the main driving force for the formation of the nanocomposites. It was demonstrated that the ratio of DM/MMA is important factor in stability of the system. The particle size, polymer content, efficiency of the coating reaction, and morphology of resulted nanocomposite particles showed a dependence on the amount of the surfactant. Zeta potential measurements confirmed that the DM was located at the surface of the nanocomposites particles. Thermogravimeteric analysis indicated a relationship between the composition of polymer shell and polymer content of the nanocomposites. The nanocomposites were also characterized by FTIR and differential scanning calorimetry techniques. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008