Highly efficient synthesis of coumarin derivatives in the presence of H14[NaP5W30O110] as a green and reusable catalyst

A variety of heteropolyanions including: Keggin, Dawson, Preyssler, mixed addenda and sandwich types, catalyzed the formation of 4-methylnaphtho-(1,2-b)-pyran-2-one (coumarin) from the condensation of α-naphthol and ethylacetoacetate in a solvent free system and under heating conditions. Our data vividly indicate that sodium30–tungsto pentaphosphate, [NaP₅W₃₀O₁₁₀]¹⁴⁻, which so-called Preyssler’s anion, with high hydrolytic (pH 0–12) and thermal stability is the catalyst of choice. This catalyst catalyzed the synthesis of other coumarin derivatives in high yields and good selectivity.     

Effect of operating conditions and liquid physical properties on the size of monodisperse microbubbles produced in a capillary embedded T-junction device

The aim of this study was to investigate the effect of operating parameters such as liquid flow rate, gas inlet pressure, and capillary diameter as well as the influence of the physical properties of the liquid, in particular viscosity, on the generation of monodisperse microbubbles in a circular cross section T-junction device. Aqueous glycerol solutions with viscosities ranging from 1- to 100 mPa s were used in the experiments. The bubble diameter generated was studied for systematically varied combinations of gas inlet pressure, liquid flow rate, and liquid viscosity with a fixed capillary inner diameter of 150 μm for the liquid and gas inlet channels as well as the outlet channel. In addition, the effect of channel geometry on bubble size was studied using capillaries with inner diameters of first 100 and then 200 μm. In all the experiments the distance between the coaxial capillaries at the junction was set to be 200 μm. All the microbubbles produced in this study were highly monodisperse (polydispersity index <1 %) and it was found, as expected, that bubble formation and size were influenced by the ratio of liquid to gas flow rate, capillary size, and liquid viscosity. The experimental data were then compared with empirical scaling laws derived for rectangular cross-section junctions. In contrast with these previous studies, which have found bubble size to be dependent on either the flow rate ratio (the squeezing regime) or capillary number (the dripping regime), in this experimental study bubble size was found to depend on both capillary number and flow ratio.     

Highly efficient synthesis of benzopyranopyridines via ZrP2O7 nanoparticles catalyzed multicomponent reactions of salicylaldehydes with malononitrile and thiols

ZrP₂O₇ nanoparticles as an efficient catalyst have been used for the preparation of benzopyrano[2,3-b]pyridines from the four-component condensation reaction of salicylalde-hydes, thiols, and 2 equiv. of malononitrile under reflux conditions in ethanol in excellent yields and short reaction times.     

Nickel‐Catalyzed Reductive Benzylation of Aldehydes with Benzyl Halides and Pseudohalides

The reductive benzylation of aromatic and aliphatic aldehydes with benzylic halides is reported using a nickel/zinc catalyst system. In addition to benzylic halides, the first report on the addition of benzylic triflates, acetates, tosylates and tritylates to aldehydes is also presented. By this new method a range of alcohols was synthesized efficiently from aldehydes and benzylic substrates at room temperature in moderate to high yields. The mild reaction conditions and good functional group tolerance make this nickel‐catalyzed process synthetically useful for the synthesis of diverse benzylic alcohols.

     

Effect of ionic strength on the reactivity ratios of acrylamide/acrylic acid (sodium acrylate) copolymerization

The ionic strength (IS) of polyelectrolyte solutions plays an important role in influencing reaction kinetics. The largely unstudied effect of IS on monomer reactivity ratios and copolymerization rates of acrylamide (AAm) and acrylic acid (AAc), in the form of sodium acrylate (NaAc), is investigated. Salt addition affects the nature of overall charges of the polyelectrolyte solution and diminishes the electrostatic repulsions between reacting chains. Therefore, changing the IS of the solution by incorporating salts affect not only the point estimates of the monomer reactivity ratios but also the overall behavior of the copolymerization (with a transition to azeotropic behavior). Experimental results on copolymerization rates confirm the observed trends in reactivity ratio behavior. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40949.     

Applicability of the standard specifications of ASTM C618 for evaluation of natural pozzolans

Nowadays, the production of binary cements, containing pozzolans (including silica fume, fly ash, natural pozzolans, etc.), is a global practice. Many countries have ample resources of natural pozzolans, capable of being used in binary cements, which reduce environmental impacts while reaping greater economies of scale. The ASTM C618 standard provides one of the most applicable methods for evaluating natural pozzolans. Some research results show contradictions between performance of pozzolans in concrete and the specifications of ASTM C618, as pozzolans having a high pozzolanic activity according to this method do not always exhibit suitable performance in concrete, however, in the other researches ASTM C618 showed compatibility. This treatment analyses the chemical and physical properties of different natural pozzolans by means of ASTM C618 and complementary tests, viz. methods of EN 196-5, X-ray diffraction (XRD) and environmental scanning electron microscopy (ESEM) studies, insoluble residue content and thermo-gravimetric investigations. Measurements of mechanical and transport properties, for concretes containing various fractions of the pozzolans, were performed for further verification. The results illustrate that the pozzolanic properties, determined via the ASTM C618 standard, show some disparities with the performance of concretes, whereas the EN 196-5 standard agrees well with performance.     

A CUSUM-based method for monitoring simple linear profiles

In most statistical process control applications, the quality of a process or product is characterized by univariate or multivariate quality characteristics and monitored by the corresponding univariate and multivariate control charts, respectively. However, sometimes, the quality of a process or a product is better characterized by a relationship between a response variable and one or more explanatory variables. This relationship, which can be linear, nonlinear, or even a complicated model, is referred to as a profile. So far, several methods have been proposed for monitoring simple linear profiles. In this paper, a new method based on cumulative sum statistics is proposed to enhance monitoring of linear profiles in phase II. The performance of the proposed method is evaluated by average run length criterion. A comprehensive comparison is also conducted between the performance of the proposed method and the existing methods for monitoring simple linear profiles. The results show that the proposed method performs satisfactorily. In addition, the effects of reference value, sample size, and corrected sum of squares of explanatory variables on the performance of the proposed method are investigated.