Graphite formation on Ni film by chemical vapor deposition

Thin film formation of graphite by chemical vapor deposition using 2-methyl-1,2′-naphthyl ketone as a starting material was carried out on Ni film substrates. On Ni films directly deposited on quartz glass, the graphite films were obtained when the Ni film thickness was above 1 000 Å and above 5 000 Å at 700 °C and 1 000 °C, respectively. Depositions on thinner Ni film substrates comprise amorphous carbon (a-C) or graphite tubes which was owing to the thermal coagulation of the Ni film into droplets. On the other hand, graphite film was obtained on the Ni film with thickness 10 Å when a-C was inserted between the Ni film and the quartz glass. The coagulation of the Ni film is considered to be avoided by inserting a-C layer.     

Effects of surrounding brightness on visual search for safety colors

The present article reports the investigation of the effects of surrounding brightness on a visual search for three safety colors: red, orange, and yellow. Images of visual stimuli consisting of an array of colored circles placed on a large visual field (a visual angle of 40°) were displayed on an 80‐in. screen with a DLP projector. Experiment I examined the search efficiency under three levels of background luminance that were equivalent to the three target luminances. The results showed that the search efficiency for the orange target decreased as the number of distractors increased, under each of the background luminance levels, whereas the efficiency scarcely decreased for the red and yellow targets. Although a reduction in background luminance increased the search efficiency for the orange target, it is suggested that the effect of background luminance is smaller than the effect of the target color in search efficiency. Experiment II examined the search efficiency under three conditions of low levels of incident illuminance, which were matched with a linear regression to the luminance of color chips of safety colors measured twilight conditions. The results showed that the search efficiency for the orange target decreased as the number of distractors increased under each of the different illuminance conditions, whereas the efficiency scarcely decreased for red and yellow targets. Furthermore, as illuminance decreased, the search time for the orange target was more greatly impacted than for red or yellow. These results imply that the recognition of orange tends to be influenced by the surrounding brightness. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 400–409, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20152     

Age-related accumulation of phosphatidylcholine hydroperoxide in cultured human diploid cells and its prevention by α-tocopherol

The levels of phosphatidylcholine hydroperoxide in serially cultured human fetal diploid fibroblasts at various population doubling levels were determined by high-performance liquid chromatography combined with chemiluminescence detections. This methodology utilizes a mixture of cytochromec and luminol as post-column hydroperoxide group specific luminescent reagents. The cellular hydroperoxide content increased with age from 0.34 to 27.72 pmol/10⁶ cells. At the end of the cells'in vitro lifespan (51st population doubling level), the hydroperoxide content per 10⁶ cells reached about 80 times the level found in cells of the 20th population doubling level. Supplementation of exogenous α-tocopherol to the culture medium prevented hydroperoxide accumulation, but did not extent the lifespanin vitro. The results indicate that substantial intracellular phospholipid hydroperoxide accumulation occurred in the course of aging of human fetal liploid fibroblasts.     

Interfacial Reactions between Sapphire and Silver—Copper—Titanium Thin Film Filler Metal

Wetting and brazing studies of sputtering-deposited, submicrometer thin film filler metal in an Ag—Cu—Ti/Al₂O₃ system were performed. The interfacial reaction layer between the filler metal and Al₂O₃ was investigated. It is possible to make a brazing joint even with a reaction layer of less than 100 nm thickness. Different types of interfacial reaction layers were observed when the Ti content in the filler metal was varied. The Cu—Ti—O system compounds were observed in the samples with high wetting capabilities, but not in the sample with low wetting characteristics. It was found that these compounds are substances that promote effective brazing.     

Polymerization of methyl methacrylate by tri-n-butylborane in the presence of amino acid esters

The polymerization of methyl methacrylate by tri-n-butylborane in the presence of amino acid esters was investigated. The binary systems of tri-n-butylborane and amino esters were found to be more effective for initiating the polymerization than tri-n-butylborane alone. Co-catalytic effects of amino acid esters were in the order: tyrosinate > glutamate > aspartate ? phenyl alaninate > serinate > glycinate. The rate of polymerization in a mixture of dimethylsulphoxide and toluene was proportional to the square root of the concentration of the initiator system, to the monomer concentration, and to the concentration of dimethylsulphoxide in the solvent. The overall energy of activation was estimated to be 4.6 kcal/mol for the tri-n-butylborane/methyl tyrosinate system. Copolymerization curves gave a typical free-radical character.     

Utilizing endoscopic technology to reveal real-time proteomic alterations in response to chemoprevention

Cancer chemoprevention approaches use either pharmacological or dietary agents to impede, arrest or reverse the carcinogenic process. Although several agents have shown effectiveness against colon cancer, present intervention strategies provide only partial reduction. In this study, we utilized high-resolution endoscopy to obtain colon tumor biopsy specimens from Apc mutant mice before and after 2-wk sulindac intervention. To acquire information beyond genomics, proteome analysis using the ProteomeLab PF2D platform was implemented to generate 2-D protein expression maps from biopsies. Chromatograms produced common signature profiles between sulindac and nonsulindac treated samples, and contrasting profiles termed "fingerprints". We selected a double peak that appeared in tumor biopsies from sulindac-treated mice. Further analyses using MS sequencing identified this protein as histone H2B. The location of H2B in the 1(st) dimension strongly suggested PTM, consistent with identification of two oxidized methionines. While further studies on sulindac proteomic fingerprints are underway, this study demonstrates the feasibility and advantages of "real-time" proteomic analysis for obtaining information on biomarker discovery and drug activity that would not be revealed by a genetic assay. This approach should be broadly applicable for assessing lesion responsiveness in a wide range of translational and human clinical studies.     

Addition of Synthetic Biomaterials to Deproteinized Bovine Bone Mineral (DBBM) for Bone Augmentation—A Preclinical In Vivo Study

(1) Aim: To investigate the effect of synthetic bone substitutes, α-tricalcium phosphate (α-TCP) or bi-layered biphasic calcium-phosphate (BBCP) combined with deproteinized bovine bone mineral (DBBM), on bone formation. (2) Methods: Thirty critical size defects were randomly treated with the following five different treatment modalities: (1) negative control (NC, empty), (2) DBBM, (3) α-TCP + DBBM (1:1), (4) BBCP 3%HA/97%α-TCP + DBBM (1:1), and (5) BBCP 6%HA/94%α-TCP + DBBM (1:1). The samples, at four weeks post-surgery, were investigated by micro-CT and histological analysis. (3) Results: A similar level of new bone formation was demonstrated in the DBBM with α-TCP bone substitute groups when compared to the negative control by histomorphometry. DBBM alone showed significantly lower new bone area than the negative control (p = 0.0252). In contrast to DBBM, the micro-CT analysis revealed resorption of the α-TCP + DBBM, BBCP 3%HA/97%α-TCP + DBBM and BBCP 6%HA/94%α-TCP + DBBM, as evidenced by a decrease of material density (p = 0.0083, p = 0.0050 and p = 0.0191, respectively), without changing their volume. (4) Conclusions: New bone formation was evident in all defects augmented with biomaterials, proving the osteoconductive properties of the tested material combinations. There was little impact of the HA coating degree on α-TCP in bone augmentation potential and material resorption for four weeks when mixed with DBBM.     

A novel method for determining vitamin B1 in a wide variety of foodstuffs with or without polyphenols

Certain foodstuffs exhibit matrix interference effects on the vitamin B₁ analysis prescribed in the official methods of the European Union, AOAC International, and Japan. In this study, we demonstrated that one of the problematic polyphenols in green tea or cocoa was tannin. For these matrices, thiamine was found to interact with tannin in the extraction step and was thus removed by filtration as a residue. To resolve the matrix interference, we proposed lowering the pH of the extraction solution by adding hydrochloric acid after the enzyme reaction. High precision (2–3% RSDr) and good recovery (98.3–103%) were obtained with reference materials using the proposed method. We also confirmed the equivalence of the obtained data from the proposed method and the Japanese official method for nutritional labeling. From these results, the method was found to be effective for vitamin B₁ analysis regardless of the presence of interference matrices.     

Human Response to Emergency Communication: A Review of Guidance on Alerts and Warning Messages for Emergencies in Buildings

The purpose of this article is to provide guidance on enhancing human response to emergency communication. This guidance can, in turn, help engineers improve the design of emergency notification and messaging systems, which, as a result, can help inform occupant response, reduce occupant evacuation time, and increase occupant safety. The article begins with a literature review on how people respond to emergencies. The Protective Action Decision Model, which describes the decision-making process that precedes human response in disaster events, is used as a framework for the literature collected as part of this review. This model is divided into three pre-decisional and five decisional processes. The method used to create the guidance document is then explained, including the six steps taken to review the literature collected (from 162 engineering and social science sources), generate findings from this literature, and compile the key statements found in the guidance document. Guidance on alerts, visual/audible warnings and dissemination of warning messages are provided. These are organized according to alert/warning type and dissemination method. The findings of the literature review include five guidance statements on alerts, 16 guidance statements on visual warnings, seven guidance statements on audible warnings and eight guidance statements on the dissemination of warning messages. Finally, guidance on emergency message testing, including language, readability and fire drills as a means of response testing, is provided. It is envisioned that this guidance will inform practitioners on the design of future emergency communications and subsequently enhances evacuee performance through a better understanding of the manner in which emergency information is processed and the tools available to provide such information.