Agile distributed software development: enacting control through media and context

While face‐to‐face interaction is fundamental in agile software development, distributed environments must rely extensively on mediated interactions. Practicing agile principles in distributed environments therefore poses particular control challenges related to balancing fixed vs. evolving quality requirements and people vs. process‐based collaboration. To investigate these challenges, we conducted an in‐depth case study of a successful agile distributed software project with participants from a Russian firm and a Danish firm. Applying Kirsch's elements of control framework, we offer an analysis of how control was enacted through the project context and in the participants' mediated communication. The analysis reveals that formal measurement and evaluation control were persistently enacted through mediated communication. These formal control practices were, however, predominantly carried out in conjunction with informal roles and relationships such as clan‐like control inherent in agile development. Overall, the study demonstrates that, if appropriately applied, communication technologies can significantly support distributed, agile practices by allowing concurrent enactment of both formal and informal controls. The paper discusses these findings as they relate to previous research and concludes with their implications for future research.     

Posture variation among office workers when using different information and communication technologies at work and away from work

Office workers perform tasks using different information and communication technologies (ICT) involving various postures. Adequate variation in postures and muscle activity is generally believed to protect against musculoskeletal complaints, but insufficient information exists regarding the effect on postural variation of using different ICT. Thus, this study among office workers aimed to determine and compare postures and postural variation associated with using distinct types of ICT. Upper arm, head and trunk postures of 24 office workers were measured with the Physiometer® over a whole day in their natural work and away-from-work environments. Postural variation was quantified using two indices: APDF_(90-10) and EVA_(sd). Various ICT had different postural means and variation. Paper-based tasks had more non-neutral, yet also more variable postures. Electronics-based tasks had more neutral postures, with less postural variability. Tasks simultaneously using paper- and electronics-based ICT had least neutral and least variable postures. Tasks without ICT usually had the most posture variability. Interspersing tasks involving different ICT could increase overall exposure variation among office workers and may thus contribute to musculoskeletal risk reduction.     

Neck postures in air traffic controllers with and without neck/shoulder disorders

Prolonged computer work with an extended neck is commonly believed to be associated with an increased risk of neck-shoulder disorders. The aim of this study was to compare neck postures during computer work between female cases with neck-shoulder disorders, and healthy referents. Based on physical examinations, 13 cases and 11 referents were selected among 70 female air traffic controllers with the same computer-based work tasks and identical workstations. Postures and movements were measured by inclinometers, placed on the forehead and upper back (C7/Th1) during authentic air traffic control. A recently developed method was applied to assess flexion/extension in the neck, calculated as the difference between head and upper back flexion/extension. Results: cases and referents did not differ significantly in neck posture (median neck flexion/extension: -10 degrees vs. -9 degrees ; p=0.9). Hence, the belief that neck extension posture is associated with neck-shoulder disorders in computer work is not supported by the present data.     

On the evolution of task-based analysis of manual materials handling, and its applicability in contemporary ergonomics

The industrial revolution significantly changed the way work was organized and analyzed by the introduction and widespread implementation of the division of labor philosophy. This philosophy has continued to dominate work design, and has evolved beyond the factory to include many facets of service industries, and even professional occupations. The analysis of manual work, particularly materials handling tasks, remains an active domain of ergonomics research and practice. Many of the task-analytic tools used for workplace analysis are rooted in the philosophy of dividing work into elements, analyzing the individual elements, and synthesizing the results into conclusions about the entire job, including the risk of contracting musculoskeletal disorders (MSDs). The authors discuss the notion that the nature of modern work, which is characterized by multiple tasks in a complex time pattern, and the complex nature of MSDs, which are influenced by biomechanical as well as psychological, political, and economic factors, may limit the effectiveness of classical task analytic techniques in preventing MSDs.     

Cost efficiency comparison of four video-based techniques for assessing upper arm postures

Many video-based techniques for assessing postures at work have been developed. Choosing the most appropriate technique should be based on an evaluation of different alternatives in terms of their ability to produce posture information at low input costs, i.e. their cost efficiency. This study compared four video-based techniques for assessing upper arm postures, using cost and error data from an investigation on hairdressers. Labour costs associated with the posture assessments from the video recordings were the dominant factor in the cost efficiency comparison. Thus, a work sampling technique associated with relatively large errors appeared, in general, to be the most cost-efficient because it was labour-saving. Measurement bias and other costs than labour cost for posture assessment influenced the ranking and economic evaluation of techniques, as did the applied measurement strategy, i.e. the numbers of video recordings and repeated assessments of them. PRACTITIONER SUMMARY: The cost efficiency of four video-based techniques for assessing upper arm postures was compared. Work sampling techniques were in general more cost efficient than continuous observations since they were labour-saving. Whilst a labour cost dominated the comparison, 'hidden costs', bias and measurement strategy also influenced this dominance.     

Cultivation and engineering of a software metrics program

Abstract. This paper reports from a case study of an organization that implements a software metrics program to measure the effects of its improvement efforts. The program measures key indicators of all completed projects and summarizes progress information in a quarterly management report. The implementation turns out to be long and complex, as the organization is confronted with dilemmas based on contradictory demands and value conflicts. The process is interpreted as a combination of a rational engineering process in which a metrics program is constructed and put into use, and an evolutionary cultivation process in which basic values of the software organization are confronted and transformed. The analysis exemplifies the difficulties and challenges that software organizations face when bringing known principles for software metrics programs into practical use. The article discusses the insights gained from the case in six lessons that may be used by Software Process Improvement managers in implementing a successful metrics program.     

Protective Strategies and Emotions Invested in Early Modern Danish Christening Garments

Abstract

In 2006–2007, Den Gamle By, National Open Air Museum of Urban History and Culture in Denmark staged a large exhibition of christening garments dating from the eighteenth century until the present. It was called “Christian Clothing and Baptismal Robes over 300 years.” More than 100 objects were exhibited. Garments for babies remind us of the vulnerability of the newborn and in this way they are emotional objects for us today and probably also in the past. Elements of vulnerability are especially obvious for modern viewers when the garments originate from earlier periods with much higher infant mortality rates than today. Parents in earlier centuries used various strategies to protect their small pagans from exposure to evil before baptism. In this way emotions were invested in the garments, but it is a challenge to access and analyze these emotions because the garments themselves do not constitute a language in the same way as written texts. The article will deal with three different material elements which might be considered protective strategies for babies. The first and longest part of the article presents the color red as a means of protection. The next section considers the use of metal as protection against evil and coins as vehicles of good fortune. The third and shortest section discusses the reuse of ritual garments in new ceremonial contexts. When their provenance is known, it is striking that several baptismal garments represent a reuse of garments from weddings or other rites de passage, as termed by Arnold van Gennep.     

The ability of limited exposure sampling to detect effects of interventions that reduce the occurrence of pronounced trunk inclination

Ergonomics interventions often focus on reducing exposure in those parts of the job having the highest exposure levels, while leaving other parts unattended. A successful intervention will thus change the form of the job exposure distribution. This disqualifies standard methods for assessing the ability of various exposure measurement strategies to correctly detect an intervention's effect on the overall job exposure of an individual worker, in particular for the safety or ergonomics practitioner who with limited resources can only collect a few measurements. This study used a non-parametric simulation procedure to evaluate the relationship between the number of measurements collected during a self-paced manufacturing job undergoing ergonomics interventions of varying effectiveness, and the probability of correctly determining whether and to which extent the interventions reduced the overall occurrence of pronounced trunk inclination, defined as an inclination of at least 20°. Sixteen video-recordings taken at random times on multiple days for each of three workers were used to estimate the time distribution of each worker's exposure to pronounced trunk inclination. Nine hypothetical ergonomics intervention scenarios were simulated, in which the occurrence of pronounced trunk inclination in the upper 1/8, 1/4, and 1/2 of the job exposure distribution was reduced by 10%, 30% and 50%. Ten exposure measurement strategies were explored, collecting from one to ten pre- and post-intervention exposure samples from an individual worker. For each worker, intervention scenario and sampling strategy, data were bootstrapped from the measured (pre-intervention) and simulated (post-intervention) exposure distributions to generate empirical distributions of the estimated intervention effect. Results showed that for the one to three intervention scenarios that had the greatest effect on the overall occurrence of trunk inclination in the job, one to four pre- and post-intervention measurements, depending on worker, were sufficient to reach an 80% probability of detecting that the intervention did, indeed, have an effect. However, even for the intervention scenario that had the greatest effect on job exposure, seven or more samples were needed for two of the three workers to obtain a probability larger than 50% of estimating the magnitude of the intervention effect to within ±50% of its true size. For almost all interventions affecting 1/8 or 1/4 of the job, limited exposure sampling led to low probabilities of detecting any intervention effect, let alone its correct size.     

Job enlargement and mechanical exposure variability in cyclic assembly work

Cyclic assembly work is known to imply a high risk for musculoskeletal disorders. To have operators rotate between work tasks is believed to be one way of decreasing this risk, since it is expected to increase variation in mechanical and psychological exposures (physical and mental loads). This assumption was investigated by assessing mechanical exposure variability in three assembly tasks in an electronics assembly plant, each on a separate workstation, as well as in a 'job enlargement' scenario combining all three stations. Five experienced operators worked for 1 h on each station. Data on upper trapezius and forearm extensor muscle activity were obtained by means of electromyography (EMG), and working postures of the head and upper arms were assessed by inclinometry. The cycle-to-cycle variance of parameters representing the three exposure dimensions: level, frequency and duration was estimated using ANOVA algorithms for each workstation separately as well as for a balanced combination of all three. For a particular station, the variability of trapezius EMG activity levels relative to the mean was higher than for extensor EMG: between-cycles coefficients of variation (CV) about 0.15 and 0.10, respectively. A similar relationship between CV applied to the parameter describing frequency of EMG activity. Except for head inclination levels, the between-cycles CV was larger for posture parameters than for EMG. The between-cycles variance increased up to six fold in the job enlargement scenario, as compared to working at only one station. The difference in mean exposure between workstations was larger for trapezius EMG parameters than for forearm extensor EMG and postures, and hence the effect of job enlargement on exposure variability was more pronounced for the trapezius. For some stations, job enlargement even implied less cycle-to-cycle variability in forearm extensor EMG parameters than working at that station only. Whether the changes in exposure variability associated with job enlargement were sufficient to imply a decreased risk for musculoskeletal disorders is not known.     

Cryptanalysis of MD2

This paper considers the hash function MD2 which was developed by Ron Rivest in 1989. Despite its age, MD2 has withstood cryptanalytic attacks until recently. This paper contains the state-of-the-art cryptanalytic results on MD2, in particular collision and preimage attacks on the full hash function, the latter having complexity 2⁷³, which should be compared to a brute-force attack of complexity 2¹²⁸.