Experimental and numerical investigation of fracture in double-edge notched steel plates

Double-edge notched (DENT) steel plates were pulled until complete fracture and several experimental observations were made (using profilometry and scanning electron microscopy). The essential work of fracture (EWF) model was found to be well verified. Numerical simulations—up to the maximum load only—of some experiments were performed using the finite element method (FEM), and incorporating geometric and material non-linearities (large deformation elasto-plasticity). Some experimental measurements were compared with the corresponding numerical computations and excellent agreement was found.     

Controlled oxidation of methane doped catalysts irradiated by microwaves

The oxidative coupling of methane has been studied on a (SmLiO₂)_0.8(CaOMgO)_0.2 catalyst by using two different modes of heating: a conventional oven and a microwave irradiation set-up. The C₂ selectivity obtained with microwave heating was much higher than with conventional heating especially at low conversions. This difference could arise from the reduction of oxidation products (ethane, ethylene) in the gas phase under microwave irradiation.     

Feeding rats with liposomes or fish oil differently affects their lipid metabolism

Two n‐3 polyunsaturated fatty acid (PUFA)‐rich diets differing in their chemical and physical forms were given to rats during 2 wk. Liposomes [phospholipids (PL) organized in bilayer structures] made from a natural marine lipid extract or a mixture of fats containing fish oil [similar fatty acids esterified in triacylglycerols (TAG)] were used. The influence of n‐3 PUFA dietary sources on plasma parameters, i.e. TAG, cholesterol and PL concentrations, was investigated. A similar hypotriglyceridemic effect of n‐3 PUFA from liposomes or fish oil was observed. In contrast, feeding rats with liposomes led to different PL and cholesterol patterns. In the plasma of rats fed liposomes, total cholesterol amounts were positively correlated with PL levels. Liposome and fish oil feedings caused a marked increase in the amounts of n‐3 PUFA, which occurred mainly at the expense of n‐6 PUFA. However, the enrichment in n‐3 PUFA in the different plasma lipid classes differed substantially when ingested in the form of fish oil or liposomes. These results were interpreted in terms of different lipid bioavailability and metabolic fate during the digestive steps and in the liver, with the dietary source.     

Clinical, morphologic and immunophenotypic data based on 10 cases of canine muco-cutaneous epidermotropic T-lymphoma (analogous to Mycosis Funcgo?de). Important of an animal model of spontaneous pathology

Our serie of ten canine cutaneous epitheliotropic T-cell lymphomas (CTCL), is found in old dogs, belonging mainly to the Boxer breed. Site on the mucous membranes (especially buccal), the muco-cutaneous junctions, their clinical expression is polymorphous. Lesions, follow on one after another (erythema, plaques, nodules) and are diversely associated in a given animal, the borders between the different stages often being difficult to establish. Adenopathies noted at the time of the diagnosis or during the course of the condition are accompanied by an involvement of the blood and organs (analogous to Sézary's disease). The progression of the disease can be very rapid in the buccal forms, which are generally aggressive, and in cases of violent, uncontrollable pruritus, which may be disturbing for the owner (with requests for euthanasia). The neoplastic infiltrate is constituted of small lymphocytes with hyperchromatic, convoluted nuclei (incipient stages), then large cells with a "histiocytic" appearance for the nodules. Epitheliotropism, which is maximal for the infiltrated plaque stage, shows up either in the form of a flux of totally epitheliotropic isolated cells (Ketron-Goodman type) or in that of Pautrier abscess-like collections. THe veterinary literature is in agreement that the CTCL cell expresses CD3, but two recent studies are in contradiction as regards its membership of helper or cytotoxic/suppressor populations. For our 10 cases, all the cells of lymphocytic morphology were, without exception, CD3+ and CD45+, irrespective of their situation within the epithelium or the chorion. The CD3+ cells in the epithelium were systematically CD8+, CD4- (confirming P.F. Moore's observations), expressing CD5 in a variable way, and, mostly, the Ki-67 nuclear proliferation Ag. The CD3+ cells of the chorion were exclusively, or mainly, CD8+, and occasionally CD4+. They expressed CD5 in a variable way, and, for a minority, the Ki-67 nuclear proliferation Ag. On the pathogenic level, it may be suggested that a T clone, CD8+, undergoes the "homing" phenomenon within the epithelium, enters the cell cycle, then manifests a tropism towards the chorion, which it infiltrates. Despite some particularities, which may be clinical (serious mucous attacks), cytological (the "histiocytic" appearance of the nodule cells) or immunophenotypic (expression of CD8, similar to what is observed in man in a considerable number of Pagetoid reticulosis), CTCL constitutes an interesting model of spontaneous pathology, and could prove useful in: - identifying various etiological factors (given that the dog, as a close commensal of man, is subject to the same environmental factors).     

Co-doping effects of (Al,Ti, Mg) on the microstructure and electrical behavior of ZnO-based ceramics

Co-doped ZnO-based ceramics using Al, Ti, and Mg ions in different ratios were synthesized with the objective to investigate the doping effects on the crystalline features, microstructure and the electrical behavior. For Al and Ti doping, a coexistence of crystalline phases was shown with a major wurtzite ZnO structure and secondary spinel phases (ZnAl₂O₄, Zn₂TiO₄, or Zn_aTi_bAl_cO_d), while Mg doping did not alter significantly the structural features of the wurtzite ZnO phase. The electrical behavior induced by Al, Ti, and Mg co-doping in different ratios was investigated using Raman, electron paramagnetic resonance (EPR) and ²⁷Al and ⁶⁷Zn solid-state nuclear magnetic resonance (NMR). Al doping induces a high electrical conductivity compared to other doping elements. In particular, shallow donors from Zn_i-Al_Zn defect structures are inferred from the characteristic NMR signal at about 185 ppm; that is, quite far from the usual oxygen coordinated Al. The Knight shift effect emanating from a highly conducting Al-doped ZnO ceramics was considered as the origin of this observation. Oppositely, as Ti doping leads to the formation of secondary spinel phases, EPR analysis shows a high concentration of Ti³⁺ ions which limit the electrical conductivity. The correlation between the structural features at the local order, the involved defects and the electrical behavior as function of the doping process are discussed.     

Synthesis,Thermal Properties and Electrical Conductivity of Na-Sialate Geopolymer

This work aims to study the thermal behavior of basic-geopolymers derived from metakaolin (clay). The geopolymers were characterized by different techniques: thermal analysis (DTA, TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and impedance spectroscopy. Some physicochemical properties of the products were also determined: the phases obtained after geopolymer heat treatment and their electrical properties. The results obtained after drying and heat treatment showed that the products kept their initial shapes, but revealed variable colors depending on the temperatures at which they were treated. The products obtained are amorphous between 300 up to 600 °C with peaks relating to the presence of nanocrystallites of muscovites and zeolite, thus at 900 °C it is quite amorphous but only contains nanocrystallites of muscovites. From the temperature of 950 °C, we notice that the geopolymer has been transformed into a crystalline compound predominated by the Nepheline (NaAlSiO₄) with the presence of a crystalline phase by minor peaks of Muscovite, this crystalline character has been increased at 1100 °C to obtain a whole phase crystalline of a Nepheline. The treatment of this geopolymer for one hour at 1200 °C shows an amorphous phase again corresponding to corundum (α-Al₂O₃). This indicates that the dissolution of the grains by the liquid phase induces the conversion of the material structure from sialate [–Si–O–Al–O] to sialate siloxo [–Si–O–Al–O–Si–O–] and the formation of a new crystalline phase (α-Al₂O₃). This development of sialate to sialate-siloxo was confirmed by IR spectroscopy. As mentioned above, from 300 to 900 °C, Na-sialate geopolymer exhibits the same disorder structure of nepheline. The crystal structure of nepheline is characterized by layers of six-membered tetrahedral rings of exclusively oval conformation. The rings are built by Regularly alternating tetrahedral AlO₄ and SiO₄. Stacking the layer’s parallel to the c axis gives a three-dimensional network containing channels occupied by Na cations. This topology favors easy movement of Na⁺ ions throughout the structure. For this reason, ionic migration in nepheline is widely reported. The refinement of Na-Sialate geopolymer at room temperature gives bulk high ionic conductivity of about 5 × 10^?5 S cm^?1 and this is due to the probable joint contribution of H⁺ and Na⁺ ions. Above 200 °C, Na⁺ seems to remain the only charge carrier with a low activation energy of about Ea?=?0.26 eV. At higher temperatures, the characteristic frequencies become so close that it is impossible to distinguish the contributions. A total resistance comprising both grain and grain boundaries contribution is then determined.

     

Aromatics saturation by sulfided Nickel---Molybdenum hydrotreating catalysts

The effect of H₂S on the rates of toluene hydrogenation of sulfided Mo, Ni, Ni---Mo and Ni---Mo---P/alumina catalysts has been determined at 6 MPa, 350°C over a large range of H₂S partial pressure. In those conditions, Ni/alumina is nearly inactive. For the three other catalysts, similar trends are found with in particular no effect of H₂S at high partial pressure. In the presence of NH₃, the effect of H₂S remains globally the same.     

Sulfided Mo and CoMo supported on zeolite as hydrodesulfurization catalysts: transformation of dibenzothiophene and 4,6-dimethyldibenzothiophene

The hydrodesulfurization (HDS) of dibenzothiophene (DBT) and of 4,6-dimethyldibenzothiophene (4,6-DMDBT) was carried out on sulfided Mo and CoMo on HY catalysts, and also on sulfided Mo and CoMo on alumina catalysts (fixed bed reactor, 330°C, 3 MPa hydrogen pressure). On all the catalysts, the two reactants transformed through the same parallel pathways: direct desulfurization (DDS) leading to biphenyl-type compounds, and desulfurization after hydrogenation (HYD) leading first to tetrahydrogenated intermediates, then to cyclohexylbenzene-type products. However, additional reactions were observed with the zeolite-supported catalysts, namely methylation of the reactants, cracking of the desulfurized products, and, in the case of 4,6-DMDBT, displacement of the methyl groups and transalkylation. The global activity of Mo/zeolite in DBT or 4,6-DMDBT transformation as well as its activity for the production of desulfurized products (HDS) were much higher than those of Mo/alumina. On the other hand, cobalt exerted a promoting effect on the activity in the transformation of DBT or 4,6-DMDBT of all the molybdenum catalysts. However, this effect was much less significant with the zeolite support than with the alumina support, which indicated that the promoter was not well associated to molybdenum on the zeolite support. Therefore, the activity of CoMo/zeolite in the HDS of DBT was much lower than that of CoMo/alumina. On the contrary, in the case of 4,6-DMDBT CoMo/zeolite was more active in HDS than CoMo/alumina. This increase in HDS activity was attributed to the transformation of 4,6-DMDBT into more reactive isomers through an acid-catalyzed methyl migration. The consequence was that on the zeolite-supported catalyst 4,6-DMDBT was more reactive than DBT.     

Left ventricular radial tagging acquisition using gradient-recalled-echo techniques: sequence optimization

Myocardial tagging with magnetic resonance (MR) imaging offers unique possibilities for noninvasive left ventricular (LV) strain analysis. True three-dimensional strain analysis can be achieved with tags implemented in cardiac short axis and long axis images. Spin-echo (SE) techniques have been used for these studies. However, this approach is time-consuming: images at different phases of the cardiac cycle have to be obtained in successive measurements and hence the total number of measurements equals the number of time frames. Moreover, the images are often degraded by flow and motion artifacts. The purpose of this study was to optimize a faster and more robust MR tagging sequence for use on a clinical whole-body 1 T MR system with optimal persistence of the tags during the entire cardiac cycle. The tagging pulses were implemented in gradient-recalled-echo (GRE) sequences and compared to SE-based acquisitions. The effects of the use of flow-compensating gradients, the excitation angles, and the angles of the saturation pulses have been studied with MR signal simulations and in comparative measurements in volunteers. GRE acquisitions with flow-compensating gradients are robust techniques for myocardial tagging acquisitions. Use of optimized flip angles and saturation pulses can significantly improve delineation of the tag and can be used up to at least 700 ms after the R-wave. Therefore, LV tagging with GRE acquisitions using optimized MR parameters is a robust and promising technique.