The U.S. role in global internet governance

Who should control the Internet? A dozen years after the Internet became a mass medium, this issue has continued to grow in urgency, becoming white hot in fall 2005. At the September 2005 preparatory meeting for the UN World Summit on the Information Society (WSIS), a coalition of countries criticized the United States' unilateral control of the Internet's domain name system (DNS) and proposed the establishment of a multinational Council to supervise it. This proposal emerged from the Final Report of the UN Working Group on Internet Governance. Researchers from the Internet Governance Project, a university-based consortium for policy analysis, have concluded that the United States should internationalize governance of the Internet, but in a way that avoids intrusive, centralized control.     

Paresthesias: a practical diagnostic approach

Filarial nematodes are a cause of chronic debilitating diseases in the tropics. A hallmark of filariasis is the marked down-regulation and polarization of host immune responses, yet molecular constituents of parasites causing this state have remained undefined. We describe a 17-kDa antigen (Av17) of the rodent filarial parasite Acanthocheilonema viteae, which shows amino acid homologies to cystatin C, a major cysteine protease inhibitor belonging to family 2 of the cystatin superfamily. Av17 is released by filariae in vitro. Exported molecules of A. viteae worms are shown to markedly suppress mitogen-induced T cell proliferation of mice and jirds. Av17 accounts for 45.5% of this suppressive activity in the murine system. Recombinant Av17 (rAv17), expressed in Escherichia coli, exhibits biological activity as a cysteine protease inhibitor and was used to examine the immunomodulatory effects, rAv17 induces down-regulation of murine T cell responses to mitogens, to T cell receptor cross-linking by anti-CD3 antibodies and to specific antigens, and at the same time up-regulation of interleukin-10. Hence, this filarial cystatin is a likely effector molecule of immunomodulation and a potential target for antifilarial intervention.     

Experimental Simulation of the Reactor Section of Fluid Cokers: Comparison of FCC and Fluid Coke Particles

The hydrodynamics of fluid cokers were studied in a pressurized fully cylindrical cold model of diameter 483 mm, geometrically and dynamically scaled down by a factor of ～20 from commercial units. Differential pressure fluctuations, voidage distributions, solids momentum flux distributions and steady state gas mixing behaviour in the reactor section are compared for the same operating conditions with two kinds of particles, FCC and fluid coke. The voidage distributions and core‐annular flow structures in the reactor section were similar enough that either FCC or fluid coke particles can be used for cold modelling of fluid cokers.     

Hydrocarbon condensation modelling to mitigate fluid coker cyclone fouling

FLUID COKING is a continuous process that thermally converts heavy hydrocarbons, such as oil sands bitumen, to lighter and higher‐value products by horizontal spray injection onto a fluidized bed of hot coke particles. The cyclone sections of commercial fluid coker reactors experience fouling during typical operation, which limits unit run lengths. The main objective of this work is to improve fluid coker reliability by proposing cyclone fouling mitigation strategies based on practical operation modifications. This study developed a process simulation in Aspen Plus to establish the combined impact of vapour‐liquid equilibrium, endothermic thermal cracking reactions, pressure changes, and overall fluid dynamics in the selected fluid coker control volumes. The hydrocarbon composition was defined by applying an assay characterization of distillation data for representative hydrocarbon streams. Case studies were performed to determine the sensitivity of the predicted temperatures and hydrocarbon condensate flow rates for: (a) the burner‐to‐fluid coker transfer line temperature; (b) the hot coke flow rate; (c) hot coke entrainment from the freeboard region; and (d) scouring coke flow rate in the horn chamber. The scouring coke flow rate was identified as the most promising process lever to mitigate fluid coker cyclone fouling.     

Value not virtual ‐ one library's response to the virtual campus

The purpose statement of Deakin University Library is ‘We help people learn.’ This applies equally to on or off‐campus students, which has meant that the Library has strived to provide innovative resources and services to break down the barriers of geography and time experienced by our remote students. With the advances in information and communication technologies, Deakin University Library has been able to capitalise on these developments to deliver electronic services to both on and off‐campus students, thus complementing the valuable services provided by the Library team. While the services provided through the virtual or digital library are a great leap forward, providing access to a wide range of resources and services 24 hours per day x 7 days per week, these services must be seen in conjunction with the professional assistance provided by librarians. Deakin University Library's success is in its customer focus and the value added digital services available through the virtual campus.     

Compression pre-cracking to generate near threshold fatigue-crack-growth rates in two aluminum alloys

A test program was conducted to generate threshold and near-threshold data on two aluminum alloys: 2324-T39 and 7075-T7351, using compression pre-cracking constant-amplitude (CPCA) threshold testing procedures. Compact tension specimens were tested under stress ratios (R) of 0.1, 0.4, 0.7 or 0.8. Results were compared with either existing load-reduction data from the literature or with data that were generated using the load-reduction procedures. On the 2324 alloy, very little difference was observed between the load-reduction and CPCA test methods, although the CPCA test method consistently produced slightly lower thresholds or slightly faster crack-growth rates. But on the 2324 alloy, most of the load-reduction tests used extremely low initial ΔK values to grow the cracks under load reduction, which may explain the reason for the agreement. These low ΔK values were achieved by using compression pre-cracking to initiate a crack at the crack-starter notch. In contrast, the 7075 alloy showed very large differences between the CPCA and load-reduction results in the near-threshold and threshold regimes for R=0.1 and 0.4. Results under high R conditions (R=0.7) agreed very well between the two threshold test methods. An expression was also developed to generate fatigue-crack-growth-rate data using the CPCA threshold test method that would be unaffected by compressive yielding at the crack-starter notch and produce ‘steady-state’ constant-amplitude data in the near threshold regime.     

A global approach to the physics validation of simulation codes for future nuclear systems

This paper presents a global approach to the validation of the parameters that enter into the neutronics simulation tools for advanced fast reactors with the objective to reduce the uncertainties associated to crucial design parameters. This global approach makes use of sensitivity/uncertainty methods; statistical data adjustments; integral experiment selection, analysis and “representativity” quantification with respect to a reference system; scientifically based cross-section covariance data and appropriate methods for their use in multigroup calculations. This global approach has been applied to the uncertainty reduction on the criticality of the Advanced Burner Reactor (both metal and oxide core versions) presently investigated in the frame of the GNEP initiative. The results obtained are very encouraging and allow to indicate some possible improvements of the ENDF/B-VII data file.     

Attenuation and dispersion for high-Tc superconductingmicrostrip lines

The attenuation and dispersion of microstrip lines of the high-T_c superconductor YBa₂Cu₃O₇ (YBCO) on yttria-stabilized zirconia substrates as a function of frequency and temperature are calculated. The effect on pulse propagation of superconducting and model dispersion in addition to the attenuation is demonstrated. At 60 K, microstrip lines of YBCO are significantly less attenuating at frequencies below 500 GHz than microstrip lines of copper at the same temperature. This advantage is particularly significant at the higher attenuations that result as the substrate thickness is made smaller for miniaturization or to improve the microstrip line bandwidth. The application of YBCO for microstrip lines appears to be most useful at frequencies above 100 GHz and dielectric thicknesses less than 100 μm, where the attenuation of cooled copper is prohibitively large. Cooled to temperatures below 20 K, YBCO may make possible a new generation of extremely high bandwidth (~5 THz), small-feature-size (~5 μm) circuits and devices     

Comparing traditional and Rasch analyses of the Mississippi PTSD Scale: revealing limitations of reverse-scored items

This study examined whether Rasch analysis could provide more information than true score theory (TST) in determining the usefulness of reverse-scored items in the Mississippi Scale for Posttraumatic Stress Disorder (M-PTSD). Subjects were 803 individuals in inpatient PTSD units at 10 VA sites. TST indicated that the M-PTSD performed well and could be improved slightly by deleting one item. Factor analysis using raw scores indicated that the reverse-scored items formed the second factor and had poor relationships with normally scored items. However, since item-total correlations supported their usefulness, they were kept. The subsequent Rasch analysis indicated that five of the seven worst fitting items were reverse-scored items. We concluded that using reversed items with disturbed patients can cause confusion that reduces reliability. Deleting them improved validity without loss of reliability. The study supports the use of Rasch analysis over TST in health research since it indicated ways to reduce respondent burden while maintaining reliability and improving validity.