Microencapsulation of Nigella sativa seeds oil containing thymoquinone by spray‐drying for functional yogurt production

The present work reports on the microencapsulation of Nigella sativa seeds oil containing thymoquinone (TQ) by spray‐drying, using modified starch (MS) and maltodextrin (MD) mixture as wall materials aimed at producing functional yogurt. First, the impact of different ratios of MS/MD on microencapsulation efficiency (ME) and TQ retention was investigated. The highest ME (90.10%) was found in microcapsules prepared from emulsion with 80/20 ratio of MS/MD; however, the microcapsules prepared with 50/50 ratio was selected for considering TQ stability under storage conditions and functional yogurt production due to an acceptable ME (89.48%) and better TQ retention (61.12%). The results showed that the microcapsules stored at refrigerator temperature had the highest content of TQ after 4 weeks. Moreover, the results of chemical and sensory analysis suggest that N. sativa seeds oil microcapsules can be used for producing functional yogurt due to high stability of TQ and proper chemical and sensory properties.     

Effect of preventive maintenance intervals on reliability and maintenance costs of wind turbine gearboxes

As many of the installed wind turbines (WTs) get older or approach their design life, there will be a drive to keep extending the lives of the main components especially the gearbox. The challenge of operations and maintenance will potentially be even more as there will be a need to keep the cost to a minimum. Similarly, as years of experience of operating WTs accumulate, knowledge about the behaviour and failure of subsystems is gained as well. Also with good documentation and repository of historical operational, performance and failure data, future decisions of operations and maintenance can be taken on the basis of insights from past experience. This paper presents an approach for implementing preventive maintenance (PM) by using historical failure data to determine the optimal PM interval required to maintain desired reliability of a typical module or subassembly. This paper builds upon previous research in the area of WT gearbox reliability analysis and prediction, taking it further by examining the relationships between the frequency of a PM task and the reliability, availability and maintenance costs. The approach presented demonstrates how historical in‐service failure data can be used in PM task selection based on the minimum maintenance cost and maximum availability. Available historical field failure data of the high speed module of a Vestas 2MW WT gearbox is used to validate the approach and show its practicality. The results of this study are then presented—indicating that choosing the right PM interval based on the minimum unit maintenance cost and maximum availability also improves WT gearbox reliability. Copyright © 2014 John Wiley & Sons, Ltd.     

Optimisation of serine protease extraction from mango peel (Mangifera Indica Cv. Chokanan)

This study investigated the possible relationship between the enzyme extraction variables, namely amount of buffer (25–75 ml, X₁), temperature (−20, 25 °C, X₂) and mixing time (1–3 min, X₃) on total protein (Y₁), total activity (Y₂), specific activity (Y₃), storage stability (Y₄), temperature stability (Y₅) and pH stability (Y₆) of serine protease from mango peel. It was found that there was significant (p < 0.05) fit of the response surface models for all the response variables investigated. There was indication of high coefficient of determination (R²) values (between 0.954 and 1.000) in the regression models describing variations of the response variables. It was found that there was no significant (p > 0.05) difference between the experimental and predicted values. This ensured that the response surface models used to indicate property changes of serine protease as a function of enzyme extraction conditions were sufficient.     

Structural and Magnetic Properties of RMO3 (R = Pr,Nd and M = Fe,Co) Perovskites

Journal of Superconductivity and Novel Magnetism - In this work, the RMO3 (R?=?Pr, Nd and M?=?Fe, Co) perovskites had been synthesized by hydrothermal method. The structural...     

Recent trends in graphene materials synthesized by CVD with various carbon precursors

Graphene is a single layer of carbon atoms arranged in an sp²-hybridized structure with properties far superior compared to other materials. Research and development in graphene synthesis have been rapidly growing the past few years, especially using chemical vapor deposition (CVD) over various types of carbon precursor. The nature and the type of carbon precursor is one important parameter of growth by CVD, especially for graphene production, since they can dramatically impact graphene growth yield and rate. However, effects of the used carbon precursor on graphene growth mechanisms are rarely discussed. In the course of large-scale and low-cost graphene preparation, this review on the recent trends regarding the utilization of diverse carbon precursors used to synthesize graphene via the CVD method is of great interest for development of improved or alternative synthesis methods. The details and the mechanisms involved in graphene synthesis using carbon precursors in the form of gaseous, liquids and solids are compared, analyzed and discussed thoroughly. In this review, we present a thorough overview on the impact and mechanisms of carbon precursors in achieving high-quality graphene with competitive edge in the near future.     

Ethylene glycol biodegradation in microbial fuel cell

Ethylene glycol is an environmental pollutant, which exists in airport runoff and industrial waste. In this article, biodegradation of ethylene glycol in a two-chamber, batch-mode microbial fuel cell was investigated. Glucose and ethylene glycol at different concentrations were used as carbon and energy sources. Chemical oxygen demand removal in the range of 92–98% indicated that microbial fuel cell can be used for biodegradation of ethylene glycol. Ethylene glycol also improved power generation and the maximum power density was 5.72 mW/m² (137.32 mW/m³), with respect to the same glucose and ethylene glycol concentrations (500 ppm).     

Production of l-asparaginase from Escherichia coli ATCC 11303: Optimization by response surface methodology

This paper discusses the studies carried out for the optimal production of enzyme l-asparaginase (l-asparagine amidohydrolase, EC 3.5.1.1) from Escherichia coli (ATCC 11303). It was found that inoculum age of 18 h and inoculum size of 10% were the most favorable operating conditions for enzyme production. Lactose, yeast extract and KH₂PO₄ were found to be the best carbon, nitrogen and ion sources, respectively. Statistical method was used to survey how various medium conditions affect the enzyme production. By response surface methodology, the values of lactose, tryptone, yeast extract, KH₂PO₄ and l-asparagine concentration were investigated to obtain the maximum enzyme activity. The highest enzyme activity, 1.03 U mL⁻¹ enzyme, was determined under the following conditions: 1.08% lactose, 1.79% tryptone, 1.6% yeast extract, 2% KH₂PO₄ and 0.19% l-asparagine. Response surface methodology proved to be a powerful tool in optimizing the medium and by this method, more than 10-fold (from 0.1 to 1.03 U mL⁻¹) enhancement in l-asparaginase activity was achieved as compared to that obtained in the basal medium (Luria-Bertani media, inoculum age of 24 h and inoculum size of 10%).     

Lactic Acid: An Efficient and Green Catalyst for the One-Pot Five-Components Synthesis of Highly Substituted Piperidines

ABSTRACT

Polyfunctionalized heterocyclic compounds have an important role in the drug discovery process and analysis of drugs in late development. Piperidines and their analogues have received attention owing to their biological activities, because of the importance of these heterocycle compounds, there is still a need to improve the ways for green synthesis of these compounds. In this study, lactic acid was applied as a green and efficient catalyst for the one-pot five-component synthesis of highly substituted piperidines from the reaction between aromatic aldehydes, aromatic amines, and b-ketoester at ambient temperature. This methodology has a number of advantages such as: use of easy access and green catalyst, short reaction times, high yields, and easy work-up (just simple filtration).     

Biomass and lipid productivities of marine microalgae isolated from the Persian Gulf and the Qeshm Island

In this work, the screening of 147 microalgal strains from the Persian Gulf and the Qeshm Island (Iran) were done in order to choose the best ones, in terms of growth (biomass) rate and lipid content for biodiesel production. A methodology, combining experiments in lab-scale and pilot plant (open pond) used to produce and evaluate biomass and lipid productivity is presented for the systematic investigation of the potential of different microalgae species. The culture conditions, including photo flux (180 ??E m⁻² s⁻¹), photoperiod (12 h light/dark), temperature (25 °C), pH (≈8), air (carbon dioxide) and growth medium, were kept constant for all experiments. Microalgae were screened in two stages using optical density (for evaluation of biomass concentration) and Nile red and gas chromatography (for determination of lipid content and fatty acid fractions). In general, maximum specific growth rate and the maximum biomass productivity were obtained after 8-12-day culture. Nannochloropsis sp. and Neochloris sp. were selected from the marine microalgal culture collection, due to their high biomass (50 and 21.7 g L⁻¹, respectively) and oil content (52% and 46%, respectively). If the purpose is to produce biodiesel only from one species, Nannochloropsis sp. presented the most adequate fatty acid profile, namely linolenic and other polyunsaturated fatty acids. However, the microalgae Chlorella sp. can also be used if associated with other microalgal oils. In addition, selected strains could be potent candidates for commercial production in the open pond culture.