Study on the performance of Cd2+ sorption using dimethylethylenediamine-modified zinc-based MOF (ZIF-8-mmen): optimization of the process by RSM technique

ABSTRACT

Cadmium as a highly toxic metal is released into the environment through paper production, metal processing, phosphate fertilizers, insecticides, and treatment of wastewater. Cadmium also inhibits the body activities and is very toxic for kidney and other organisms. In the current study, zinc-based metal–organic framework, zeolitic imidazolate framework (ZIF)-8, was synthesized and modified by dimethylethylenediamine (ZIF-8-mmen) for the removal of cadmium. To optimize the experiments, response surface methodology was applied with three variables including pH, adsorbent dosage, and contact time using central composite design. The optimum conditions for pH, dosage, and time were 2, 0.1 g, and 89 min, respectively, with removal efficiency of 85.38%. The Langmuir isotherm (q _m = 1000 mg/g) indicates the monolayer adsorption. The kinetic studies reveal that the Lagergren model was predominant and cadmium was not chemisorbed. Thermodynamic parameters show spontaneous, endothermic, and physisorption processes.     

Dynamics of localizable entanglement in a qutrit chain with Dzyaloshinskii–Moriya interaction

Dynamics of localizable entanglement in a qutrit chain, in the presence of the Dzyaloshinskii–Moriya (DM) interaction is studied. Three distinct initial states, namely, superposition of the ground and the first excited state (SGE), a GHZ state and a superposition of qutrit coherent states (SQCS) are considered in this investigation. While the ground and the first excited state exhibit the maximum of entanglement, the latter is diminished for any superposition of the states. In both SGE and GHZ cases, localizable entanglement (LE) oscillates and its period is a decreasing function of the ratio of the strength of DM interaction and the spin coupling constant (DS ratio), but its maximum value is independent of the latter. In SQCS case, LE also oscillates in time at small values of DS ratio; its average is reduced as the strength of the DM interaction increases and gains its maximum average and the highest peaks at a specific value of the coherence parameter.     

Green synthesis and characterization of RGO/Cu nanocomposites as photocatalytic degradation of organic pollutants in waste-water

Recently, nanocomposite photocatalysts based on semiconductors have attracted much attention due to their suitable bandgap. Combination of tow of several semiconductors can slow down the electron-hole recombination. In this regard, we have depicted an eco-friendly and green fabrication technique to synthesize RGO/Cu nanocomposite by the reduction of graphene oxide and Cu²⁺ ion utilizing spearmint extract as a reductant and capping agent. The sample was identified by FTIR, XRD, FESEM, EDS, HRTEM, and CV. The results of photocatalytic performance revealed that RGO/Cu is an efficient catalyst for degrading organic pollutants. This compound can eliminate Rhodamine B (RhB) and Methylene blue (MB) 91.0% and 72.0%, respectively.     

Optimal sensor placement for source localization based on RSSD

Wireless Networks - Source localization based on the received signal strength (RSS) has received great interest due to its low cost and simple implementation. In this paper we consider the source...     

A near-optimal Algorithm for H 8 identification of fixed order rational models

This paper presents a near-optimal algorithm for H     

Effect of nano-sized calcium carbonate on cure kinetics and properties of polyester/epoxy blend powder coatings

Today's strict environmental laws pose significant challenges for coating's formulators to look for eco-friendly products. Powder coatings, particularly polyester/epoxy blends have demonstrated their ability as alternatives to traditional solvent-borne coatings. Recently, the use of nanoparticles such as nano-CaCO₃ (nCaCO₃) has been suggested as a beneficial strategy towards powder coating application with improved properties. Here, we study the effect of nCaCO₃ on morphology, cure behavior, adhesion and hardness of polyester/epoxy systems. The nanoparticles shape, size and dispersion state were investigated through X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) methods. Furthermore, isothermal cure characterization of the neat and filled systems was performed using a torque rheometer. The most important finding based on the rheological studies was the catalytic effect of nCaCO₃ on cure reaction of polyester/epoxy, leading to the shorter curing time. Moreover, the kinetic analyses of rheograms revealed a marked decrease in the activation energy of the cure process upon raising nCaCO₃ content. Interestingly, pull-off adhesion and hardness tests showed that the hardness and adhesion strength were dramatically increased by the addition of nCaCO₃ into the polyester/epoxy system compared to pure blend resin. Therefore, considering the strong competition in powder coating market, the use of nCaCO₃ as a commercial and inexpensive nanofiller is necessary not only to reduce the dwell time which has benefits in terms of the energy consumption and economics, but also to improve the performance of final polyester/epoxy coating.     

Differential leukocyte count method for bovine low somatic cell count milk

Whereas many differential leukocyte count methods for high somatic cell count (SCC) milk from mastitic cows are available, only a few have been developed for low SCC milk. We have developed a flow cytometric differential leukocyte count method for low SCC milk. The procedure consists of 1) 1.5 ml of diluted milk sample (30%, vol/vol dilution with PBS), 2) centrifugation, 3) leukocyte labeling with SYTO 13 and 4) flow cytometric analysis. Four major leukocyte populations can be clearly identified in the green fluorescence-side scatter dot plot: lymphocytes and monocytes (LM), polymorphonuclear neutrophils (PMN), mature macrophages (Mphi), and cells with apoptotic features based on chromatin condensation and nuclear fragmentation. The optimal processing temperature was 20 degrees C. Significant differences among samples with similar differential leukocyte counts were found. Storage of milk samples during 2 d at 7 degrees C had no effect on differential leukocyte count. Using the new method, differential leukocyte count was performed in low SCC milk samples from cows in early, mid, and late lactation. In accordance with previous studies, PMN and Mphi percentages were lower and LM percentages were higher in early lactation than in the other stages of lactation. The percentage of cells with apoptotic features was higher in early lactation than in mid and late lactation. In conclusion, a rapid, simple, accurate, and reproducible standard procedure was developed to determine the differential leukocyte count (Mphi, PMN, LM, and cells with apoptotic features) of bovine low SCC milk.     

Analysis of transport phenomena within PEM fuel cells – An analytical solution

Transport phenomena within PEM fuel cells are investigated and a comprehensive analytical solution is presented. The methodology couples the transport within the fuel cell supply channels and the substrate which is composed of five different layers. The layers are all treated as macroscopically homogeneous porous media with uniform morphological properties such as porosity and permeability. The locally volume-averaged equations are employed to solve for transport through the porous layers. The problem encompasses complex interfacial transport phenomena involving several porous–porous as well as porous–fluid interfaces. Chemical reactions within the catalyst layers are also included. The method of matched asymptotic expansions is employed to solve for the flow field and species concentration distributions. Throughout the analysis, the choice of the gauge parameters involved in the perturbation solutions for velocity and concentration is found to be inherently tied to the physics of the problem and therefore an important physical metric. The analytical solution is found to be in excellent agreement with prior computational simulations. The analytical results are used to investigate several aspects of transport phenomena and their substantial role in PEM fuel cell operation. The solution presented in this work provides the first comprehensive analytical solution representing fuel cell transport phenomena.     

Putative mechanism for anticancer properties of Ag–PP (NPs) extract

One of the most important challenges in treating cancer is the invasion and the angiogenesis of cancer cells. The synthesis of green nanoparticles (NPs) and their use in therapeutic fields is one of the most effective methods with minimal side effects in cancer treatment. In this study, cytotoxic and anti‐angiogenic effects of silver NPs (AgNPs) coated with palm pollen extract [Ag–PP(NPs)] were evaluated. For this purpose, the cells were treated with NPs and then were subjected to trypan blue testing (48 h). Then, the cancer invasion was evaluated by the scratch procedure and the expressions of the vascular endothelial growth factor (VEGF) and its receptor (VEGF‐R) genes were estimated using real‐time PCR assay. Also, the angiogenesis effect of the NPs was investigated with chick chorioallantoic membrane (CAM) assay. The Ag–PP(NPs) induced cytotoxicity on MCF7 cells. The findings also showed that Ag–PP(NPs) inhibit invasive cancer cells and reduce the expression of VEGF and VEGF‐R and significantly reduced the number and vessels lengths and the lengths and weights of the embryos in CAM assay. Ag–PP(NPs) with the induction of cytotoxic effects, metastatic inhibition and anti‐angiogenesis properties should be considered as an appropriate option for treatment of cancerInspec keywords: nanomedicine, genetics, cellular biophysics, toxicology, patient treatment, silver, cancer, biochemistry, biomedical materials, nanoparticles, nanofabrication, membranesOther keywords: minimal side effects, cancer treatment, silver NPs, cancer invasion, vascular endothelial growth factor, receptor genes, VEGF‐R, real‐time polymerase chain reaction assay, angiogenesis effect, chick chorioallantoic membrane assay, MCF7 cells, invasive cancer cells, cytotoxic effects, putative mechanism, anticancer properties, antiangiogenic effects, antiangiogenesis properties, Ag–PP‐induced cytotoxicity, metastatic inhibition, palm pollen extraction, trypan blue testing, time 48.0 hour, Ag