Cyclic Nanoindentation for Local High Cycle Fatigue Investigations: A Methodological Approach Accounting for Thermal Drift

Cyclic nanoindentation allows characterizing the influence of single phases and their interactions on fatigue mechanisms. Herein, a method for high cycle fatigue testing by nanoindentation is presented. By combining high- and low-frequency indentation modes, high cycle numbers are achieved while obtaining sufficient data points to reconstruct force–displacement hysteresis loops. A challenge is the stochastic course of thermal drift which is addressed by measuring drift rate in regular low-force holding segments. Drift rates are used to correct the displacement values, yielding reproducible cyclic deformation data as it is shown for two very different materials, a ductile metal and a brittle ceramic.     

Correctness of dataflow and systolic algorithms using algebras of streams

We present two case studies which illustrate the use of second–order algebra as a formalism for specification and verification of hardware algorithms. In the first case study we specify a systolic algorithm for convolution and formally verify its correctness using second–order equational logic. The second case study demonstrates the expressive power of second–order algebraic specifications by presenting a non–constructive specification of the Hamming stream problem. A dataflow algorithm for computing the Hamming stream is then specified and the correctness of this algorithm is verified by semantical methods. Both case studies illustrate aspects of the metatheory of second-order equational logic. Received: 16 August 1999 / revised version: 15 June 2001     

轴流风机叶尖泄漏流动的大涡模拟（英文）

本文采用大涡模拟(LES)的方法研究了在基于外壳直径的雷诺数为9.36×105条件下5叶片的轴流式风扇的流动特性,并且着重分析了叶尖泄漏的流动现象。本文使用了基于有限体积法和分层笛卡尔网格的可压流求解器进行数值计算,并应用了体积守恒的切割网格方法处理风扇几何结构的浸入式边界。同时开发了用于笛卡尔网格的旋转周期性边界条件,这样只需分析由2.5亿网格构造的包含一片叶片的72°区域。该研究首先对网格质量进行了分析,之后讨论了瞬态和时均流场的特性,并与使用RANS的5叶片模拟结果进行了对比。RANS和LES模拟结果的主要不同之处体现在叶尖泄漏涡尾流中的湍流动能。本文进而研究了叶尖间隙对叶尖泄漏涡的影响。研究表明,间隙的大小会影响叶尖泄漏涡的大小形状。此外,间隙中更多的分离现象和反向旋转涡会导致较低的湍流动能。     

Cottonseed protein food products

Upward trending world population and increasing costs for traditional food proteins provide many incentives for utilization of oilseed proteins directly in human diets. Cotton, as one of the world's major oilseed crops, represents a potential source of food protein. Acceptability of oilseed protein products in terms of functional properties in food systems and nutritional value will largely determine the extent of their utilization by the food industry. Liquid cyclone process cottonseed flour, defatted glandless cottonseed flour, storage protein isolates, and cottonseed whey proteins have been evaluated by various functionality tests and in a number of food systems. The cottonseed flours have been subjected to processing by extrusion texturization. Human feeding studies have also been conducted. Results indicate a good potential for use of cottonseed protein products in a variety of food systems.     

Large-eddy simulations of film cooling flows

Large-eddy simulations (LES) of a jet in a cross-flow (JICF) problem are carried out to investigate the turbulent flow structure and the vortex dynamics in gas turbine blade film cooling. A turbulent flat plate boundary layer at a Reynolds number of Re_∞ = 400,000 interacts with a jet issued from a pipe. To study the effect of the jet inclination angle α on the flow field, two angles are chosen, the perpendicular injection at 90° and the streamwise inclined injection at 30°. For the normal injection case a small blowing ratio of the jet velocity to the cross-stream velocity R = 0.1 is examined. For the streamwise inclined injection case two blowing ratios R = 0.1 and R = 0.48 are investigated to check the impact of the jet velocity on the cooling performance. The time-dependent turbulent inflow information for the cross-flow is provided by a simultaneously performed LES of a spatially developing turbulent boundary layer. Whereas in the perpendicular injection case a rather large separation region is found at the leading edge of the jet hole, in the streamwise inclined injection cases no separation is observed. Compared with the normal injection case at the same blowing ratio, the streamwise inclination weakens the jet-cross-flow interaction significantly. Thus, the first appearance of the counter-rotating vortex pair (CVP) is shifted downstream and its strength is reduced. The increase of the blowing ratio leads to a stronger penetration of the jet into the cross-flow, resulting in a more upstream located and more pronounced CVP. Downstream of the jet exit the streamwise vortices are so large that besides the jet fluid also the cross-stream is partially entrained into this zone, which yields the worst cooling performance.     

Large-Scale CFD Data Handling in a VR-Based Otorhinolaryngological CAS-System using a Linux-Cluster

Many of the operations to eliminate complaints concerning respiration impairments fail. In order to improve the success rate, it is important to recognize the responsiveness of the flow field within the nasal cavities. Therefore, we are developing a computer assisted surgery (CAS) system that combines computational fluid dynamics (CFD) and virtual reality (VR) technology. However, the primary prerequisite for VR-based applications is real-time interaction. A single graphics workstation is not capable of satisfying this condition and of simultaneously calculating flow features employing the huge CFD data set. In this paper, we will present our approach of a distributed system that relieves the load on the graphics workstation and makes use of an off-the-shelf parallel Linux cluster calculating streamlines. Moreover, we introduce first results and discuss remaining difficulties.     

Universal algebra in higher types

We develop the elementary theory of higher-order universal algebra using the nonstandard approach to finite type theory introduced by Henkin. Basic results include: existence theorems for free and initial higher type algebras, a complete higher type equational calculus, and characterisation theorems for higher type equational and Horn classes.     

Chemometric determination of blood parameters using visible-near-infrared spectra

Visible and near-infrared (NIR) integrating sphere spectroscopy and chemometric multivariate linear regression were applied to determine hematocrit (HCT) and oxygen saturation (SatO2) of circulating human blood. Diffuse transmission, total transmission, and diffuse reflectance were measured and the partial least squares method (PLS) was used for calibration considering different wavelength ranges and selected optical measurement parameters. HCT and SatO2 were changed independently. Each parameter was adjusted to different levels and four designs with blood from different donors were carried out for the calibration with PLS. The calibration included the changes in hemolysis as well as inter-individual differences in cell dimensions and hemoglobin content. At a sample thickness of 0.1 mm the HCT and SatO2 were predicted with a root mean square error (PRMSE) of 1.4% and 2.5%, respectively, using transmission and reflectance spectra and the full Vis-NIR range. Using only diffuse NIR reflectance spectroscopy and a sample thickness of 1 mm, HCT and SatO2 could be predicted with a PRMSE of 1.9% and 2.8%, respectively. Prediction of hemolysis was also possible for one blood sample with a PRMSE of 0.8% and keeping HCT and SatO2 stable with a PRMSE of 0.03%.     

Model function to calculate the refractive index of native hemoglobin in the wavelength range of 250-1100 nm dependent on concentration

The real part of the complex refractive index of oxygenated native hemoglobin solutions dependent on concentration was determined in the wavelength range 250 to 1100 nm by Fresnel reflectance measurements. The hemoglobin solution was produced by physical hemolysis of human erythrocytes followed by ultracentrifugation and filtration. A model function is presented for calculating the refractive index of hemoglobin solutions depending on concentration in the wavelength range 250 to 1100 nm.