Use of heat-moisture treated maize starch to modify the properties of wheat flour and the quality of noodles

Waxy, normal and high-amylose maize starches were subjected to heat-moisture treatment (HMT) and then added to wheat flour (WF) in different ratios (1%, 5% and 10%). The properties of blends and their cooked noodles were studied to investigate the effects of HMT starches. The incorporation of HMT starch in WF led to an increase in swelling power, peak viscosity and breakdown and to a decrease in setback, thus inhibiting retrogradation, hence enhancing resultant noodle softness. Compared to the same addition ratio of native starch to WF, HMT starch led to higher tensile strength and extensibility in resultant noodles. WF with added HMT starch had higher resistant starch than with native starch. This study showed that addition of HMT maize starch has potential to bring nutritional benefits. However, it is necessary to select the proper blending ratio and amylose content of starch to add, in consideration of its effect on noodle quality.     

火焰动画快速模拟的新方法

针对火焰动画难以快速建模和绘制的问题,提出了完全利用GPU过程化生成火焰动画的高效算法。先用建模工具在预处理阶段构建一个由平面正方形组成的三维模型,在绘制阶段通过GPU编程对这些方形进行Billboard方式的变换,并用一些简单公式对他们的运动方式、大小和颜色来用过程化方式进行控制,最后通过alpha混合得到最终结果。算法完全在GPU里实现,能满足实时的绘制要求。     

变精度软粗糙集

从集合间的包含程度出发,构造了一种基于包含度的变精度软粗糙集模型。提出带参数的变精度近似算子的定义,得到了它的基本性质和定理,并给出了证明;定义了双精度软粗糙集的近似算子,研究了其性质;讨论了该模型与其他粗糙集模型的关系以及退化条件;举例说明了在信息处理中的应用。     

Bismuth-activated,narrow-band,cyan garnet phosphor Ca3Y2Ge3O12:Bi3+ for near-ultraviolet-pumped white LED application

Herein, a novel Bi³⁺-activated Ca₃Y₂Ge₃O₁₂ (CYGO) narrow-band cyan-emitting phosphor was synthesized. It can be excited from 320–420 nm, and the strongest excitation peak is located at 370 nm, which is suitable for current near-ultraviolet (NUV) chips perfectly. The full width at half maximum is at 52 nm. By analyzing the crystal structure of the sample, we infer that the Bi³⁺ ions replace the Y³⁺ site to form a highly symmetrical BiO₆ octahedron. The time-resolved photoluminescence (TRPL) spectra of CYGO: Bi³⁺ reveal that the only a single emission center exists in the host lattice. A warm white light–emitting diode (WLED) device with a low correlated color temperature (3148 K) and a high color rendering index (90.2) was fabricated by using the as-prepared sample, and the significant thermal stability of CYGO: Bi³⁺ guarantees its potential application in WLEDs. It is verified that the structure with only one crystallographic Y site for Bi³⁺ dopant occupation and highly symmetrical and dense structure is conducive to realize narrow-band emission, which will provide experience for researchers to explore more Bi³⁺-activated phosphors used for high-end lighting.     

无机纤维棉生物膜载体反应器脱氮性能及优化

研究了一种生态多孔纤维棉(EPFC)的生物挂膜性能,并将其应用于脱氮反应器中,考察不同DO水平与装置设计(填充率、孔密度)对脱氮效果的影响。结果表明,EPFC是一种良好的生物挂膜材料。DO含量对反应器脱氮效果影响显著,在ρ(DO)=10~11 mg/L、HRT=5 d时NH₄⁺-N去除率最高97.41%;TN去除率在ρ(DO)=9~10 mg/L、HRT=4 d时最高45.52%。对装置设计进行优化后,发现反应器BR5脱氮效果最好,其填料填充率为2/3、孔密度为5.2个/cm²;优化运行条件为ρ(DO)=9~10 mg/L、HRT=5 d,NH₄⁺-N与TN去除率分别可达98.59%和59.93%。可为EPFC进一步应用于生物脱氮工艺如生物接触氧化法、序批式活性污泥法工艺等提供思路。     

无刷直流电机无电解电容控制系统研究

在单相交流电源供电的电机驱动系统中,逆变器的直流母线侧通常并联一个几百或几千微法的电解电容,使用大电解电容稳定了母线电压,然而电解电容存在着寿命短,可靠性低等缺点。因此,本文提出了一种应用于无刷直流电机驱动系统的新型无电解电容功率变换器,该电路实现了电网侧与电机侧的功率解耦,通过功率平衡原理,使得电机侧的功率趋于稳定,并且具有寿命长,电网侧电能质量高等优点。同时,针对无刷直流电机换相转矩脉动大的缺点,在电机侧通过移相控制信号对转矩脉动进行了有效的抑制。最后,分别通过仿真和实验,验证了该无电解电容变换器及其控制算法的有效性。     

Lithiation-Induced Defect Engineering to Promote Oxygen Evolution Reaction

Exploring efficient electrocatalysts for oxygen evolution reaction (OER) is an urgent need to advance the development of sustainable energy conversion. Though defect engineering is considered an effective strategy to regulate catalyst activity for enhanced OER performance, the controllable synthesis of defective oxides electrocatalysts remains challenging. Here, oxygen defects are introduced into NiCo₂O₄ nanorods by an electrochemical lithiation strategy. By tuning in situ lithiation potentials, the concentration of oxygen defects and the corresponding catalytic activity can be feasibly regulated. In addition, the relationship between the changes in the defect density and electronic structure and the lithiation cut-off voltages is revealed. The results show that NiCo₂O₄ nanorods undertook intercalation and two-step conversion reaction, in which the lithiation-induced conversion reaction gives rise to a CoO@NiO-based structure with higher defect density and lower oxidation states. As a result, the defective CoO@NiO-based catalyst exhibits exceptional OER activity with an overpotential of 270 mV at 10 mA cm⁻², which is about 74 mV below the pristine nanomaterials. This research proposes a novel strategy to explore high-performance catalysts with structural stability and defect control.     

Hadoop平台下新型图像并行处理模型设计

Hadoop在处理海量小图像数据时，存在输入分片过多以及海量小图像存储问题。针对这些问题，不同于采用HIPI、SequenceFile等方法，提出了一个新型图像并行处理模型。利用Hadoop适合处理纯文本数据的特性，本模型使用存储了图像路径的文本文件替换图像数据作为输入，不需要设计图像数据类型。在Map阶段直接完成图像的读取、处理、存储过程。为了简化图像处理算法，将OpenCV和Map函数结合并设计了对应的存储方法，实现小图像文件的存储。实验表明，在Hadoop分布式系统平台下，模型不论在小数据量还是在大数据量的测试数据环境中，都具有良好的吞吐性能和稳定性。