Solving thermal and phase change problems with the eXtended finite element method

 The application of the eXtended finite element method (X-FEM) to thermal problems with moving heat sources and phase boundaries is presented. Of particular interest is the ability of the method to capture the highly localized, transient solution in the vicinity of a heat source or material interface. This is effected through the use of a time-dependent basis formed from the union of traditional shape functions with a set of evolving enrichment functions. The enrichment is constructed through the partition of unity framework, so that the system of equations remains sparse and the resulting approximation is conforming. In this manner, local solutions and arbitrary discontinuities that cannot be represented by the standard shape functions are captured with the enrichment functions. A standard time-projection algorithm is employed to account for the time-dependence of the enrichment, and an iterative strategy is adopted to satisfy local interface conditions. The separation of the approximation into classical shape functions that remain fixed in time and the evolving enrichment leads to a very efficient solution strategy. The robustness and utility of the method is demonstrated with several benchmark problems involving moving heat sources and phase transformations. Received 20 May 2001 / Accepted 19 December 2001     

Gender differences in computerised and conventional educational tests

Abstract Research has demonstrated girls to outperform boys on conventional literacy tests. The present studies concern gender differences on computerised educational tests. Seventy-one children were tested using LASS Secondary and a set of seven conventional measures. No significant gender differences were found on any of the LASS Secondary modules, although females did outperform males on a conventional spelling test. A further 126 pupils were tested on computerised and paper versions of the LASS Secondary reading, spelling and reasoning modules. No gender differences were found on the computerised versions, but there were significant differences on the paper versions of the reading and spelling modules favouring females. In a third study, 45 children were administered computerised and paper versions of the LASS Junior reading and spelling modules. There were no significant differences on the computerised modules, but girls performed significantly higher than boys on the paper version of the spelling module. It is possible that computerised assessment does not detect the established gender effect due to differences between males and females in motivation, computer experience and competitiveness. Further large-scale studies are necessary to confirm these findings.     

Recognizing, assessing, and intervening with problems of professional competence.

Working collaboratively, psychologist educators and trainers at the doctoral, internship, and postdoctoral levels; credentialers; practitioners; and students offer 8 proposals for psychologists to consider in recognizing, assessing, and intervening with problems of professional competence in students and practicing professionals. In the proposals, the authors address the following topics: definitions and categories; preparing the system; self-assessment; remediation; diversity; communication across various levels of the system; confidentiality; and ethical, regulatory, and legal underpinnings. They also propose future directions for the assessment of problems in professional competence in both students and practicing psychologists. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Chemical synthesis and physiological activity of sulfonium analogues of platelet activating factor

Phosphatidylsulfocholine (PSC), the sulfonium analogue of phosphatidylcholine (PC), occurs naturally in some diatoms. The replacement of the −N⁺(CH₃)₃ group by a −S⁺(CH₃)₂ results in an increase in the polar head group size in PSC relative to that of PC, consistent with the observed increase in permeability of PSC bilayers towards urea. It was of interest to see whether replacement of the −N⁺(CH₃)₃ group in platelet activating factor (PAF) by an −S⁺(CH₃)₂ group leads to any change in platelet aggregation or other physiological activity. Synthesis of the sulfonium analogue of PAF was carried out by suitable modifications of known procedures. The PAF-sulfonium analogue was found to have almost the same platelet aggregating activity as PAF itself, in the concentration range 1–20 μM, but a much lower activity in the range 0.01–1 μM. The analogue had little or no effect on the platelet aggregation activity of PAF when added in the concentration range 0.01–1 μM and had about half the hypotensive activity of PAF towards hypertensive CDF male rats. The sulfonium analogue, however, was much more cytotoxic to HL-60 cells than PAF itself, in the concentration range 0–15 μM; replacement of the acetate group by a benzyl group increased the cytotoxicity to the level of that of the methoxy analogue of PAF. Thus, replacement of the −N⁺(CH₃)₃ group by a −S⁺(CH₃)₂ group in the polar head group region of PAF results in a relatively small change in its platelet aggregation activity and a decrease in its hypotensive activity, but greatly increases its antitumor activity. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 8–12, 1989.     

Spatial and temporal scaling of nitrous oxide emissions from the field to the regional scale in Scotland

Nitrous oxide (N₂O) is a powerful greenhouse gas. As the UK government is committed to reducing greenhouse gas emissions, it is important to know not only how much of these gases are released but also where and when. Targeted measurements of emissions in relation to crop growth cycles, soil wetness and fertiliser applications were used to derive annual emission rates for specific combinations of soil type, land management and fertiliser practices. These annual emission rates were then spatially scaled to derive regional figures through the development of a Geographic Information System (GIS) based model framework. Digital soil and land use maps at a scale of 1:25000 for two test areas of approximately 200000 ha each (Lothians and the Ayrshire Basin) were overlain with a climate map within the GIS, deriving unique combinations of soil wetness and land use. The calculated annual emission rates (kg N ha^–1 yr^–1) were then applied to these and multiplied by the total area of each soil/land use type to derive annual emission losses for each area. The annual emission of nitrous oxide from the Lothians was determined as approximately 381000 kg N yr^–1, while the emissions from the Ayrshire Basin were predicted to be 794000 kg N yr^–1. This indicates the increased emissions associated with both the wetter soils of Ayrshire and the greater extent of grazed pasture systems in this area. Due to the detailed scale of the input data, localised areas with large emissions were identified. Abatement strategies would be concentrated on areas of high emissions that include a change to crops with lower emission potential, reducing fertiliser and manure inputs, reducing grazing intensity and improving soil drainage.Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1023/A:1024422604493     

Durability of sheet molding compounds: Influence of hydrothermal aging on morphology and molecular mobility at microscopic scale

The physicochemical aging for parts of Sheet Molding Compound should be considered for their lifetime management and reusability. This material has a complex morphology and contains porosity due to the process and to shrinkage compensation. This SMC study has two complementary approaches. One describes the morphological consequences of water uptake, showing the decrease in the total amount and the fractal dimension of micro-voids by scanning electron microscopy and image processing. The other shows, by mechanical spectrometry, the effect of water on physical or chemical bonds. In both cases, the “low profile agent” in SMC plays an important role. The molecular mobility was taken as a sensor parameter for the structural changes at the molecular scale, highlighting and quantifying the first steps of the aging. The loss factor level increases, and the activation energies are modified, even for the first aging days. The analysis shows recovery for the material near the relaxation peak of the low profile agent, since the curve recovers its initial shape.     

Fractal characterization of the fissures occuring during polymerization of low-profile unsaturated polyester resins

Blends of unsaturated polyester resin and polyvinylacetate (PVAc) were cured between two glass slides. In this case, the low-profile effect arises by fissuring with a fractal geometry. This paper shows how the fractal dimension of the fissures depends on the PVAc amount and on the cure temperature. These results are discussed with the present knowledge about the polyester network morphology in two phases more or less co-continuous.     

Cyclic Nanoindentation for Local High Cycle Fatigue Investigations: A Methodological Approach Accounting for Thermal Drift

Cyclic nanoindentation allows characterizing the influence of single phases and their interactions on fatigue mechanisms. Herein, a method for high cycle fatigue testing by nanoindentation is presented. By combining high- and low-frequency indentation modes, high cycle numbers are achieved while obtaining sufficient data points to reconstruct force–displacement hysteresis loops. A challenge is the stochastic course of thermal drift which is addressed by measuring drift rate in regular low-force holding segments. Drift rates are used to correct the displacement values, yielding reproducible cyclic deformation data as it is shown for two very different materials, a ductile metal and a brittle ceramic.     

Computational complexity of determining resource loops inre-entrant flow lines

This paper presents a comparison study of the computational complexity of the general job shop protocol and the more structured flow line protocol in a flexible manufacturing system. It is shown that the representative problem of finding resource invariants is NP-complete in the case of the job shop, while in the flow line case it admits a closed form solution. The importance of correctly selecting part flow and job routing protocols in flexible manufacturing systems to reduce complexity is thereby conclusively demonstrated     

Model-based cloud resource management with TOSCA and OCCI

Software and Systems Modeling - With the advent of cloud computing, different cloud providers with heterogeneous cloud services (compute, storage, network, applications, etc.) and their related...