Fuzzy logic controller and cascade inverter for direct torque control of IM

In this paper, a five-level cascaded H-bridge multilevel inverters topology is applied on induction motor control known as direct torque control (DTC) strategy. More inverter states can be generated by a five-level inverter which improves voltage selection capability. This paper also introduces two different control methods to select the appropriate output voltage vector for reducing the torque and flux error to zero. The first is based on the conventional DTC scheme using a pair of hysteresis comparators and look up table to select the output voltage vector for controlling the torque and flux. The second is based on a new fuzzy logic controller using Sugeno as the inference method to select the output voltage vector by replacing the hysteresis comparators and lookup table in the conventional DTC, to which the results show more reduction in torque ripple and feasibility of smooth stator current. By using Matlab/Simulink, it is verified that using five-level inverter in DTC drive can reduce the torque ripple in comparison with conventional DTC, and further torque ripple reduction is obtained by applying fuzzy logic controller. The simulation results have also verified that using a fuzzy controller instead of a hysteresis controller has resulted in reduction in the flux ripples significantly as well as reduces the total harmonic distortion of the stator current to below 4 %.     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

Analysis and forecasting of IPO underpricing

Probability of withdrawal is a feature of initial public offering (IPOs), which can be an important parameter in decisions of investors and issuers. Considering the probability of offering withdrawal facilitates more precise estimation of underpricing. In this paper, the effective factors on probability of IPO withdrawal and underpricing in Tehran Stock Exchange have been characterized using regression, and then neural network is applied to estimate the probability of IPO withdrawal and underpricing. To evaluate the performance of our applied method, fuzzy regression is employed and compared with neural network. According to the obtained empirical results, neural network demonstrates better accuracy than fuzzy regression. The results indicate that there is a meaningful relationship between underpricing and probability of withdrawal, and the probability of IPO withdrawal plays an important role in precise evaluation of underpricing.     

Ultrasonic synthesis of Zn-doped CdO nanostructures and their optoelectronic properties

The effect of Zn dopant on the growth of cadmium oxide (CdO) nanostructures through a sonochemical method was investigated. The X-ray diffraction (XRD) patterns of the nanoparticles show CdO cubic structures for the produced samples. Field emission scanning electron microscope (FESEM) images reveal that morphologies of the samples change, when they are doped with Zn atoms, and their sizes reduce. Room temperature photoluminescence (PL) and UV-Vis spectrometers were used to study optical properties of the samples. Evaluation of optical properties indicates that different emission bands result from different transitions and the value of CdO energy band gap increases due to doping. Studies of electrical properties of the nanostructures demonstrate that Zn dopant enhances electrical conductivity and photocurrent generation as the result of light illumination on the nanostructures due to improved density of photo-generated carriers. Considering the obtained outcomes, Zn dopant can alter the physical property of the CdO nanostructures.     

Water-assisted cold isostatic pressing to enhance sinterability of alumina ceramics

Water-Assisted cold isostatic Pressing (WAP) enabled pressure-less sintering of fine grained (0.6 μm) and nearly full dense (99.3%) weakly translucent alumina ceramics. As a term of comparison, Dry Pressed (DP) samples, prepared under identical processing conditions, maintained an opaque appearance, and their relative density did not exceed 97.7%. The enhanced compaction of WAP allowed to lower the sintering temperature down to 1350°C, which is approximately 100–150°C lower than that of DP powder. WAP samples resulted in an apparent activation energy for sintering (640 kJ/mol) matching literature values, confirming that the enhanced sinterability was attributed to an improved green density rather than a change in sintering mechanisms.     

Microfluidic study of surfactant flooding of heavy oil in layered porous media containing fractures

Surfactant injection is a promising method for enhanced oil recovery (EOR) due to its effective micro-displacement mechanisms. However, understanding the interaction of a surfactant solution with heavy oil in porous media is neither straightforward nor well understood, particularly in heterogeneous systems. By enabling in-situ real-time monitoring of flow transport, microfluidic studies have provided novel insights into the underlying multiphase physics of flow at the pore scale. This paper examines the two-phase displacement efficiency of a new surfactant in layered–fractured porous microfluidic patterns, a topic seldom discussed in the literature. To evaluate the performance of the proposed surfactant, we considered several heterogeneous media with varying layer and fracture geometrical characteristics, quantifying displacement efficiency for each case. Based on the analysis of pore-scale snapshots, it was inferred that the primary mechanisms responsible for EOR during surfactant flooding into heavy oil include pore wall transportation, emulsifications, the deformation of residual oil, inter-pore or intra-pore bridging, and wettability alteration. Macroscopic displacement experiments revealed that the width of the swept area from surfactant injection significantly exceeded that of water injection, resulting in a substantially higher oil recovery. Furthermore, it was demonstrated that the direction of fluid flow in relation to fracture orientation plays a critical role in the dynamics of surfactant solution movement and, consequently, the ultimate oil production.     

Fabrication and characterization of novel nanofibers from cress seed mucilage for food applications

Cress seed mucilage (CSM) as a new source of biomacromolecule has gained attraction in food science due to its biodegradability and biocompatibility. In this research CSM–poly(vinyl alcohol) (PVA) nanofibers were produced under different conditions by electrospinning technique. Viscosity and electrical conductivity of the produced biopolymers were analyzed. The effect of CSM to PVA volume ratio and applied electrical field were evaluated on nanofiber morphology by scanning electron spectroscopy. The optimum nanofibers showed smooth and uniform surfaces with diameter size range of 95–278 nm. The results of Fourier transform infrared spectroscopy of CSM–PVA nanofiber with volume ratio of 60:40 showed characteristic peaks of CSM and PVA. X‐ray diffractometer data clearly revealed the amorphous structure of the electrospun nanofibers. Thermogravimetric and derivative thermogravimetric analysis indicated that thermal stability of electrospun nanofibers increased in comparison to CSM and PVA. The results of this study indicated that CSM can be applied as a new source of biopolymer for production of nanofibers that could be used for different applications such as delivery systems and packaging film fabrication. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45811.     

Chip geometry and cutting force prediction in gear hobbing

This paper presents a tri-dexel geometric engine integrated simulation model for the gear hobbing operation. The process kinematics are modeled and validated using CNC signals from a Liebherr LC500 hobbing machine. Workpiece geometry updating and cutter-workpiece engagement (CWE) calculations are efficiently realized in the tri-dexel engine. 3D force contributions at discretized nodes along the hob's cutting edges are computed considering the localized principal cutting directions, and rake and inclination angles. To measure cutting forces, a rotary dynamometer is successfully adapted and used alongside a Kalman filter to compensate for structural dynamics. The predicted forces agree well with their experimental counterparts.     

Synthesis and Characterization of Superparamagnetic NiBaO<Subscript>2</Subscript> Nano-Oxide Using Novel Precursor Complex [Ba(H<Subscript>2</Subscript>O)<Subscript>8</Subscript>][Ni(dipic)<Subscript>2</Subscript>]

In this paper, for the first time, synthesis of [Ba(H₂O)₈][Ni(dipic)₂] complex and preparation of NiBaO₂ nano-oxide are reported through thermal decomposition under surfactant free condition. This novel complex was characterized by Fourier transform infrared spectroscopy (FT-IR), ultra violet–visible spectroscopy, conductivity measurement and elemental analysis. Formation of novel nanoparticles was supported by FT-IR and energy-dispersive X-ray spectroscopy and the orthorhombic structure of nanocrystals was confirmed by powder X-ray diffraction analysis. In addition, size distribution as well as uniform morphology of prepared nano-oxide were recorded by dynamic light scattering analysis and field-emission scanning electron microscopy, respectively. Magnetic features measured by vibrating sample magnetometer, illustrate superparamagnetic behavior of the oxide.