On trading wavelengths with fibers: a cost-performance based study

We consider the effect of multiple fibers on wavelength division multiplexing networks without wavelength conversion. We study networks with dynamic wavelength routing and develop accurate analytical models to compare various possible options using single- and multiple-fiber networks. We use results of an analytical model and simulation-based studies to evaluate the blocking performance and cost of multifiber networks. The number of fibers required providing high performance in multifiber networks and their costs are compared. A case is made for using multiple fibers in each link with fewer wavelengths instead of using a single fiber with many wavelengths. In particular, we show that a network with four fibers per link and with four wavelengths on each fiber without any wavelength conversion on any node yields similar same performance as the networks with one fiber per link and 16 wavelengths per fiber on each link and with full wavelength conversion capability on all nodes. In addition, the multifiber network may also offer the cost advantage depending on the relative cost of components. We develop a parametric cost model to show that multiple fibers in each link are an attractive option. Finally, such multifiber networks also has fault tolerance, with respect to a single fiber failure, already built into the system.     

Strategies for Coping With Business Trips: A Qualitative Exploratory Study.

This study aimed to better understand the impact of business trips on the traveler, the family, and the organization; to learn about maximizing the positive aspects of business travel; and to suggest measures to prevent and manage travel stress. Thirty-five business travelers (American, Israeli, and Swedish) were interviewed about the costs and benefits of their traveling, with a focus on gaining insight into coping strategies. Content analysis of the interviews showed that trips consist of 4 phases--(a) pretrip, (b) journey, (c) stay, and (d) posttrip--and that each phase is characterized by different coping strategies. Business travelers reported using proactive individual and organizational coping strategies in the pretrip phase and a combination of proactive and reactive coping strategies in the other phases. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of surfactants on phenol removal by the method of polymerization and precipitation catalysed by Coprinus cinereus peroxidase

The removal of phenol by peroxidase‐catalysed polymerization was examined using Coprinus cinereus peroxidase in the presence of surfactants. The non‐ionic surfactants with poly(oxyethene) residues, Triton X‐100, Triton X‐405 and Tween 20, enhanced the phenol removal efficiency at a level similar to high relative molecular mass poly(ethylene glycol) (relative molecular mass 3000). Although the improvement in the removal efficiency was less than that of Triton X‐100, Span 20, sodium lauryl sulfate (SDS) and lauryl trimethylammonium bromide (DTAB) also enhanced the removal efficiency. The requirement of the enzyme for almost 100% removal of 100 mg dm^?3 phenol decreased to one‐fourth by the addition of 30 mg dm^?3 Triton X‐100. Triton X‐100, Triton X‐405, Tween 20 and DTAB could reactivate the enzyme precipitated with the phenol polymer, leading to the restarting of the phenol removal reaction. Copyright © 2003 Society of Chemical Industry     

Comparison between normal and reverse thin crystalline silicon solar cells

The newly developed ingot growing techniques, as the three-grain and the columnar multigrain ingot processes, are now offering the possibility of slicing thinner wafers (≤ 100 μm). In this paper we present the results obtained on p type large area (≥ 100 cm²) and 100 μm thick wafers by using both conventional and reverse cell manufacturing technologies.The conventional cells are provided with aluminium or boron BSF plus screen-printed silver mirror or a silver-aluminium net; the reverse cells have a FSF and the deep back junction completely covered by a screen-printed or CVD silver layer.The constructing parameters have been chosen on the base of one and two dimensions modeling and both raw material and devices have been completely characterized.This work shows that very thin wafers do not introduce serious problems for the conventional manufacturing of solar cells. The efficiencies of the normal and of the reverse cells are found to be comparable and are of the same order than those of thicker cells, however at a significant lower cost. The main obtained result has to be related to the demonstration of a cell manufacturing feasibility starting from very thin wafers.     

Superior activity of a thromboxane receptor antagonist as compared with aspirin in rat models of arterial and venous thrombosis

We determined the effects of aspirin and a novel thromboxane A2/prostaglandin endoperoxide (TP)-receptor antagonist, BMS-180291, on thrombosis and bleeding times in skin and mesenteric arteries. In anesthetized rats, occlusive thrombosis was induced in the carotid artery by topical application of ferrous chloride and in the vena cava by blood flow stasis combined with either infusion of thromboplastin or hypotonic saline. Aspirin (1, 10, and 50 mg/kg) did not reduce arterial or venous thrombus weight significantly. BMS 180,291 (150 micrograms/kg/min) decreased arterial thrombus weight and hypotonic saline-induced caval thrombus weight by 58 and 57%, respectively. BMS-180291 lacked antithrombotic activity at a lower dose (50 micrograms/kg/min) and failed to inhibit thromboplastin-induced caval thrombosis. BMS-180291 (150 micrograms/kg/min) significantly reduced arterial thrombus weight by 40% when plasma epinephrine concentration was increased to 5 ng/ml. BMS-180291 and aspirin produced increases of only < or = 30% in bleeding times. These results demonstrate that BMS-180291 has antithrombotic activity in experimental aspirin-resistant arterial and venous thrombosis. Both aspirin and BMS-180291 have only modest effects on small artery hemostasis in rats.     

Effect of cooking on the chemical composition of lentils,rice and their blend (Koshary)

Lentils, rice and their blend (Koshary) were cooked by traditional Egyptian methods. Cooking resulted in slight changes in the total nitrogen, as well as in the non-protein nitrogen (NPN), ether extract and crude fibre of the three products, compared with raw grains. In contrast, significant decreases were found in the mineral elements, indicating losses through leaching, on washing and cooking. The mineral composition of lentils' cooking liquor confirmed this.     

What defense doesSchouwia purpurea (Cruciferae) have against the desert locust?

A field study of the food eaten by solitary desert locusts was carried out in a winter breeding area in Mauritania. The food eaten, determined by the plant epidermis found in fecal pellets, was compared to the plant's availability in the habitat.Schouwia purpurea, well represented in the diets, was dominant at the study site. Adults had a preference forTribulus terrester. Growth and feeding on these two plants were compared. The high water content ofS. purpurea leaves limited the dry matter eaten and slowed down growth. Glucosinolates were separated and quantified by gas chromatography. There are 132mol/g dry matter in green leaves. In multiple choice tests, with paper disks, glucosinolate extracts were phagostimulant at a low concentration (21mol/g dry matter) and repulsive at a higher one (214mol/ g dry matter). Biting behavior onS. purpurea was recorded and analyzed on video. The importance ofSchouwia purpurea in desert locust habitats and its defenses is discussed.     

Exploration of unknown object by active touch of robot hand

This paper proposes a method of exploring the local shape of an unknown object using the force and torque information obtained from active touch. In the first, we present a method to estimate an unknown curvature, using rolling and sliding motion with a force/torque sensor attached to the fingertip of the hand. Then, the normal curvature equation from 2D curvatures is obtained. Finally we present a reconstruction algorithm of local geometry by using a normal curvature equation, which is composed of principal curvatures and principal directions. The method is tested by using a hand-arm system consisting of an industrial robot arm and an anthropomorphic robot hand with 6-axis force/torque sensor. The feasibility of the proposed method is experimentally validated for objects with simple geometries such as cylinder, spheres etc.     

Microhardness studies of PMMA/natural rubber blends

The microhardness, H, of PMMA/natural rubber blends, prepared following the solution method has been investigated by means of the microindentation technique. Hardness changes are correlated with the variation of the glass transition temperature. The influence of temperature and degree of deformation on H were additionally examined. The inclusion of rubber particles in the PMMA matrix is shown to soften the blends. The variation of the micromechanical property at the phase boundary of polymer/rubber particle has been studied. Results reveal that H drastically drops at the interphase. In the case of the drawn materials, the indentation anisotropy (ΔH) is shown to gradually increase with the draw ratio, where ΔH is found to be higher for the PMMA/rubber blend than for the original PMMA. This result is explained by the higher orientation of the PMMA molecules near the periphery of stretched rubber particles. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 205–210, 2004     

Physicochemical properties of irradiated and loaded LDPE films with polyfunctional monomers

Polyfunctional monomers (PFMs), namely, trimethylol propane trimethacrylate (TMPTMA), trimethylol propane triacrylate, ethylene glycol dimethacrylate, and diethylene glycol diacrylate were blended with low‐density polyethylene (LDPE) and exposed to different doses of EB irradiation. Fourier transform infrared and ultraviolet and UV–vis spectroscopy of the unirradiated, irradiated, unloaded, and PFMs‐loaded LDPE films were studied under various irradiation doses up to 300 kGy. The degree of crosslinking and oxidative degradation, as measured by the spectroscopic parameters, were dependent on both the irradiation dose and the type of loaded PFMs. For all of the loaded monomers, the extent of crosslinking increased at different rates as a function of irradiation dose. TMPTMA monomer was the most efficient in enhancing the crosslinking of LDPE films compared to the other loaded monomers. However, the unloaded LDPE film showed the least extent of crosslinking. In addition, the EB‐radiation‐induced changes, such as trans‐vinylene formation, a decrease in vinyl and vinylidene unsaturation; and carbonyl double‐bond formation and change in crystallinity were correlated. The importance of these results on the prediction of the role of polyfunctional monomers in the production of crosslinked polymers is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2025–2035, 2003