中空激光光内送粉熔池温度控制研究

在激光增材制造过程中,熔池温度的稳定性是表征加工过程稳定性的一个重要指标.设计一套控制熔池温度的闭环反馈系统,以达到控制熔池温度,提高成形件质量.基于C#编程软件实现了温度信号的传递,采用PID控制算法设计了温度控制器.实验结果表明,此系统能实时、准确地实现熔池温度的闭环控制,能够有效消除直壁墙熔覆过程中因热累积而造成的“蘑菇云”现象,且成形件几何精度有显著提高,各处显微组织差异较小,组织致密均匀.     

Evaluation of performance enhancing proxies in internet over satellite

Performance enhancing proxies (PEPs) are widely used to improve the performance of TCP over high delay‐bandwidth product links and links with high error probability. In this paper we analyse the performance of using TCP connection splitting in combination with web caching via traces obtained from a commercial satellite system. We examine the resulting performance gain under different scenarios, including the effect of caching, congestion, random loss and file sizes. We show, via analysing our measurements, that the performance gain from using splitting is highly sensitive to random losses and the number of simultaneous connections, and that such sensitivity is alleviated by caching. On the other hand, the use of a splitting proxy enhances the value of web caching in that cache hits result in much more significant performance improvement over cache misses when TCP splitting is used. We also compare the performance of using different versions of HTTP in such a system. Copyright © 2003 John Wiley & Sons, Ltd.     

油库油料计量操作中存在的问题及其解决办法

介绍了油库油料计量中，在油品高度、油品温度和油品密度测量中存在的问题及应遵循的操作规范和注意事项。     

基于量化规则格的关联规则渐进更新*

提出一种基于量化规则格的规则更新算法,重点讨论了在新增格节点的过程中规则更新的思想,实现在格的渐增生成过程中,相应的关联规则也得到渐进更新.最后给出简单实例说明规则更新算法的正确性.     

红外测温技术在离心复合铸造轧辊生产上的应用

本文分析了离心复合铸造轧辊生产过程中离心机停机温度和时间对轧辊质量的影响 ,提出了用先进的红外测温技术来预报停机温度和时间 ,以实现微机监控适时停机 ,保证轧辊内外层熔合良好 ;同时指出了红外测温技术在离心复合铸造轧辊生产上的应用前景     

溶液缩聚物分子量分布及其控制的研究

本文根据溶液缩聚基本原理及反应过程的基本事实，用随机过程方法，得到缩聚产物分子量分布函数，并对分子量及其分布的控制作了讨论。     

Fabricating Water-Insoluble Polyelectrolyte into Multilayers with Layer-by-layer Self-assembly

Summary A water insoluble azo-containing polyelectrolyte (PEAPB6P-AC) was successfully fabricated into multilayer films based on the layer-by-layer adsorption technique by using N, N-dimethylformamide (DMF) as the assembling media. The multilayer growth and structure were studied with UV-vis spectroscopy, and the multilayer surface were imaged with Atomic Force Microscopy and compared with that fabricated in water. The results show that assembling PEAPB6P-AC in DMF can effectively eliminate the hydrophobic aggregation of the azo units and consequently results in a much smoother multilayer surface than that fabricated in water. This improvement to the layer-by-layer adsorption technique, which can avoid some major difficulties faced when assembling hydrophobic polyelectrolytes in aqueous solutions, seems to be a versatile way to fabricate high quality multilayer films when using the hydrophobic even water-insoluble polyelectrolytes as assembling units.     

2种高剪切搅拌器流动特性的CFD模拟

采用计算流体力学模拟方法对2种用于分散混合过程的高剪切搅拌器的流动特性进行研究分析,分别是转子定子搅拌器(RS)和多级叶轮式搅拌釜(CF)。本文从流场细节和功率消耗方面对其进行考察研究,从而为解释搅拌器中气泡的分散混合过程提供理论依据。模拟结果表明,在RS中流体大致呈周向流动,且剪切速率分布相对较为均匀,较高剪切速率不仅出现在转子到壁面的径向间隙处,而且出现在转子与定子之间的轴向间隙处:而在CF中,流体呈现较为明显的旋转流动,且剪切速率分布没有RS均匀,较高的剪切速率只出现在叶轮与壁面的径向间隙处。在相同转速下,虽然这2种搅拌器所形成的平均剪切速率差别不大,但CF中所形成的最大剪切速率大于RS,这也意味着相同操作条件下CF中所能形成的气泡尺寸更小,这与实验结果是一致的。对于这2种搅拌器,在层流区功率准数与搅拌雷诺数都成反比,且CFD模拟计算得到的结果与根据实验得到的关联式的结果基本一致。然而CF的功率消耗高于RS的功率消耗。     

碳黑水分离技术的研究

脱油沥青作为谢尔气化工艺的气化原料生产化肥在国内尚属首次,由于沥青原料中的灰分和重金属比渣油原料大得多,若仍采用石脑油萃取碳黑技术,灰分和重金属随碳黑返回气化装置,将造成设备的堵塞、磨损,无法保证设备安稳长期运行.通过对碳黑水分离技术进行多方面的研究,寻找到适宜的工艺路线与解决方案.     

下喷自吸环流反应器中气-液局部相际传质模型

引言 下喷自吸环流反应器是在结合喷射、环流、自吸等优点基础上而开发出的一种新型高效反应器,开展该反应器内局部气液传质模型的研究,对于该反应器的优化设计及放大具有极重要的理论意义.多年来,经典传质理论的不足与局限都在经历不断的修正与改进.其中,激光多普勒测试在传质研究中的应用使得人们对湍流在传质中的重要性有了