A Preamble Re-utilizing Access Scheme for Machine-Type Communications with Optimal Access Class Barring

Wireless Personal Communications - The existing long term evolution networks originally designed for human-to-human communications are hard to tackle numerous and bursty random access requests from...     

Densification mechanism during reactive hot pressing of B4C-ZrO2 mixtures

The densification behaviors of pure B₄C and B₄C-ZrO₂ mixtures were compared during hot pressing. The results showed that in-situ formed ZrB₂ effectively enhanced the densification process of B₄C-ZrO₂ mixtures, more significantly during the intermediate stage. Within the relative density ranging from 0.75 to 0.90, the B₄C-15?wt%ZrO₂ mixture (B15Z) achieved the maximum densification rate as twice much as that of pure B₄C. The stress exponent n>3 indicated plastic deformation was the dominant densification mechanism of B15Z. The viscosities of plastic flow were evaluated using Murray-Rodger-William equation and the viscosity of B15Z was only a quarter of that in pure B₄C. The sintering activation energy was calculated to be 305.9?kJ/mol for pure B₄C and 197?kJ/mol for B15Z, respectively. It was proposed that the lower viscosity of plastic flow and activation energy accelerated the sliding and propagating motions of plastic flow, by which underlain the enhanced densification behaviors of B₄C-ZrO₂ mixtures.     

高发泡聚乙烯阻燃初探

根据聚合物燃烧现象和一般阻燃机理寻求研究高发泡聚乙烯的阻燃方法和阻燃剂。研究结果表明:只有对添加型阻燃剂三元并用,方能不降低高发泡聚乙烯的物性,制得较为理想的高发泡聚乙烯自熄型制品。     

叠前深度偏移中的旅行时并行计算技术

旅行时计算技术是基于波动方程叠前深度偏移方法的核心内容，射线跟踪的数值计算精度和效率直接影响着介质成像质量和实用化。基于三维射线跟踪的微变网络方法和波前重建思路，提出一种适用于三维复杂介质地震波走时的快速算法。但它所需计算量巨大。采用并行计算技术，设计出基于“任务缓冲池”的动态负载平衡策略，在现有的分布式计算机上，实现了三维射线追踪和叠前深度偏移的并行计算。     

大庆油田深层岩石力学特性参数的试验研究

通过对岩石可钻性、硬度、抗压强度等参数的测量 ,对大庆油田深井不同深度、不同层位、不同岩性的具有广泛代表性的岩心进行试验。并通过线性回归分析 ,建立了适用性较广的钻井岩石力学特性参数预测模型 ,为深井钻头选型提供了依据。     

基于改进扩展关联模型的飞机组件测试性研究

多信号流图模型是一种简单而有效的系统建模方法,已广泛地应用于测试性分析和故障诊断领域;为了减少飞机维修过程中组件的不必要更换,提高维修效率,对多信号流图模型的建模方法进行研究,以飞机音频管理组件(AMU)为例,建立多信号流图模型,构建故障一测试关联矩阵和故障一故障关联矩阵;为与实际出现的组件故障信息相匹配,对故障一故障矩阵进行改进,构建了实际故障信息一故障关联矩阵,对组件模型进行测试性分析;由实际维修经验可知,该信号模型可快速地定位故障,给出相应的维修措施,减少通常维修中采取的不必要措施,降低了人为因素的影响,大大地缩短了维修时间.     

锌铝超塑性合金超塑压缩试验研究

对Ｚｎ－２２％Ａｌ超塑性合金进行了等温超塑压缩试验。在相同的温度、变形速率条件下，研究了不同的变形强度与流动应力及硬度，以及在相同的温度、变形程度条件下，不同的变形速率与流动应力等的关系。     

Engineering practice and economic analysis of ozone oxidation wet denitrification technology

SO₂ and NO emitted from coal-fired power plants have caused serious air pollution in China. In this study, a test system for NO oxidation using O₃ is established. The basic characteristics of NO oxidation and products forms are studied. A separate test system for the combined removal of SO₂ and NO_x is also established, and the absorption characteristics of NO_x are studied. The characteristics of NO oxidation and NO_x absorption were verified in a 35 t·h^-1 industrial boiler wet combined desulfurization and denitrification project. The operating economy of ozone oxidation wet denitrification technology is analyzed. The results show that O₃ has a high rate and strong selectivity for NO oxidation. When O₃ is insufficient, the primary oxidation product is NO₂. When O₃ is present in excess, NO₂ continues to get oxidized to N₂O₅ or NO₃. The removal efficiency of NO₂ in alkaline absorption system is low (only about 15%). NO_x removal efficiency can be improved by oxidizing NO_x to N₂O₅ or NO₃ by increasing ozone ratio. When the molar ratio of O₃/NO is 1.77, the NO_x removal efficiency reaches 90.3%, while the operating cost of removing NO_x per kilogram is 6.06 USD (NO₂).     

深部互层咸水层二氧化碳分布特征探究

通过构造砂页岩互层结构,并根据渗透率对砂岩层岩性进行分类,建立了多岩相非均质模型,利用多组分多相流数值模拟软件TOUGH2/ECO2N探究二氧化碳注入深部互层咸水层后的分布特征,结果显示二氧化碳聚集在低渗透性的页岩层底部,呈分层结构,砂岩层中优先在渗透率较高的岩相中运移并呈分散分布;超临界二氧化碳不断溶于地层水,含饱和二氧化碳的咸水密度增加并缓慢下沉,无明显分层现象。     

基于人工免疫理论的数据保密通信研究

针对数据保密通信的现实需求,提出一种新的保密通信方法.该方法首先基于否定选择算法从明文信息本身提取加密因子,然后再以加密因子按m序列进行密钥扩展,生成伪随机密钥序列对明文进行加密.利用该方法生成的伪随机密钥序列的自相关特性较好,数据加密后具备了较好的抗攻击性能,同时接收端还可以用加密因子进行免疫鉴别,以检验数据的完整性.