The isolated air perfused rat heart

A simple method has been developed for continuous monitoring of metabolic activity of an isolated, perfused rat heart by O2/CO2 respirometer. Since respirometer provides vital data on oxygen consumption and carbon dioxide production of a preserved organ on a continuous basis over a long period of time, it will be possible to use this method to monitor viability of not only isolated heart but also any given donor organ under preservation.     

Mathematical and Scientific Foundations for an Integrative Engineering Curriculum

All fields of engineering, whether chemical, civil, electrical, materials, mechanical, etc., encompass a common body of essential mathematics and science. In the freshman year of Drexels E⁴ program, this common mathematical and scientific foundation is cultivated in the Mathematical and Scientific Foundations of Engineering I, II and III (MSFE I, MSFE II, MSFE III). In an integrated fashion, MSFE I presents the essential calculus, physics and engineering mechanics vital to the freshman engineering student. In the first two quarters, MSFE II presents chemistry with clearly defined engineering applications and significance: in the third quarter, MSFE II presents living systems with the same thrust. Also in the third quarter, MSFE III presents basic circuits and circuit elements, and a brief introduction to electromagnetic theory.     

Casting/mold thermal contact heat transfer during solidification of Al-Cu-Si alloy (LM 21) plates in thick and thin molds

Heat flow at the casting/mold interface was assessed and studied during solidification of Al-Cu-Si (LM 21) alloy in preheated cast iron molds of two different thicknesses, coated with graphite and alumina based dressings. The casting and the mold were instrumented with thermocouples connected to a computer controlled temperature data acquisition system. The thermal history at nodal locations in the mold and casting obtained during experimentation was used to estimate the heat flux by solving the one-dimensional inverse heat conduction problem. The cooling rate and solidification time were measured using the computer-aided cooling curve analysis data. The estimated heat flux transients showed a peak due to the formation of a stable solid shell, which has a higher thermal conductivity compared with the liquid metal in contact with the mold wall prior to the occurrence of the peak. The high values of heat flux transients obtained with thin molds were attributed to mold distortion due to thermal stresses. For thin molds, assumption of Newtonian heating yielded reliable interfacial heat transfer coefficients as compared with one-dimensional inverse modeling. The time of occurrence of peak heat flux increased with a decrease in the mold wall thickness and increase in the casting thickness.     

MEMS Electrostatic Actuation in Conducting Biological Media

We present design and experimental implementation of electrostatic comb-drive actuators in solutions of high conductivity relevant for biological cells. The actuators are operated in the frequency range 1-10 MHz in ionic and biological cell culture media, with ionic strengths up to 150 mmol/L. Typical displacement is 3.5 mum at an applied peak-to-peak signal of 5 V. Two different actuation schemes are presented and tested for performance at high frequency. A differential drive design is demonstrated to overcome the attenuation due to losses in parasitic impedances. The frequency dependence of the electrostatic force has been characterized in media of different ionic strengths. Circuit models for the electric double layer phenomena are used to understand and predict the actuator behavior. The actuator is integrated into a planar force sensing system to measure the stiffness of cells cultured on suspended structures.     

Comparison of the indentation and elasticity of E. coli and its spheroplasts by AFM

Atomic force microscopy (AFM) provides a unique opportunity to study live individual bacteria at the nanometer scale. In addition to providing accurate morphological information, AFM can be exploited to investigate membrane protein localization and molecular interactions on the surface of living cells. A prerequisite for these studies is the development of robust procedures for sample preparation. While such procedures are established for intact bacteria, they are only beginning to emerge for bacterial spheroplasts. Spheroplasts are useful research models for studying mechanosensitive ion channels, membrane transport, lipopolysaccharide translocation, solute uptake, and the effects of antimicrobial agents on membranes. Furthermore, given the similarities between spheroplasts and cell wall-deficient (CWD) forms of pathogenic bacteria, spheroplast research could be relevant in biomedical research. In this paper, a new technique for immobilizing spheroplasts on mica pretreated with aminopropyltriethoxysilane (APTES) and glutaraldehyde is described. Using this mounting technique, the indentation and cell elasticity of glutaraldehyde-fixed and untreated spheroplasts of E. coli in liquid were measured. These values are compared to those of intact E. coli. Untreated spheroplasts were found to be much softer than the intact cells and the silicon nitride cantilevers used in this study.     

Large electrocaloric effect with ultrawide temperature span in Na1/2Bi1/2TiO3-based lead-free ceramics

Innovative cooling technologies are recognized by many industries as a crucial part of their system design. A large electrocaloric effect (ECE) and extended working temperature are the key issues hindering the realization of electrocaloric refrigeration technology. In this work, large ECE (ΔT = 0.8–0.9°C @ 4 kV/mm) with an ultrawide temperature span from 30 to 120°C is noted for lead-free (Na_1/2Bi_1/2)_0.80Sr_0.20(Zn_1/3Nb_2/3)_xTi_1-xO₃ ceramics. The excellent ECE performance can be ascribed to the evolution of polar nanoregions. Our work suggests that this material is promising for applications in solid-state refrigeration systems with a broad range of operating temperatures.     

Dwell-Fatigue of Ni-Based Superalloys with Serrated and Planar Grain Boundary Morphologies: The Role of the γ′ Phase on Strain Accumulation and Cavitation

The effect of grain boundary (GB) morphology on the cavitation behavior in a Ni-based superalloy, RR1000, was studied during elevated temperature dwell-fatigue at 700 °C. Following a solution heat treatment, the material was control cooled at two different rates, resulting in high angle GB morphologies that were tailored as either serrated or planar. The resulting γ′ precipitate structures were characterized near GBs and within grains. Along serrated GBs coarsened and elongated γ′ precipitates formed and consequently created adjacent regions that were denuded of γ′ precipitates. Cyclic dwell-fatigue experiments were performed at low and high stress amplitudes to vary the amount of imparted strain on the specimens. A combination of electron backscatter diffraction and digital image correlation were used to resolve strain localization relative to the GBs, in which strain accumulation was found to precede cavity formation. Additionally, the regions denuded of the γ′ precipitates were observed to localize strain and to be initial sites of cavitation. These results present a quantitative strain analysis between two variants of an RR1000 alloy, which provides the micromechanical rationale to assess the increased proclivity for serrated GBs to form cavities.

     

Design of XNBR nanocomposites for underwater acoustic sensor applications: Effect of MWNT on dynamic mechanical properties and morphology

In this work, application of rubber‐MWNT nanocomposite for underwater acoustic sensors is explored. The nanocomposite is developed by incorporating multiwalled carbon nanotubes (MWNT) into carboxylated nitrile rubber by mechanical mixing. The addition of MWNT up to 10 phr is found to result in about 330% increase in tensile strength, 140% increase in modulus, and 160% increase in tear strength. Transmission electron microscopy and scanning electron microscopy analyses indicate uniform dispersion of nanotubes in the rubber matrix. Dynamic mechanical analysis shows that damping at ambient temperature gradually increases with increasing filler content. This is attributed to the augmented frictional energy loss at the interface. The damping peak position shifts upward with increase in MWNT concentration, which may be gainfully used to tune to the operational frequency range of underwater acoustic sensors. Payne effect is observed at higher filler concentration due to the breakage of aggregates formed by filler–filler interaction. The nanocomposite may find application for damping structural vibrations and thus to improve the performance of underwater acoustic sensors. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40752.