Synthesis and characterization of acidic properties of Al-SBA-15 materials with varying Si/Al ratios

Al-SBA-15 of varying Si/Al ratios in the range 11.4–78.4 was synthesized using tri-block copolymer P123. The calcined materials were examined by XRD, pore size distribution, surface area, ²⁷Al NMR spectroscopy. The acidity and acid strength distribution were studied using microcalorimetric adsorption of NH₃. The acidic properties were also examined by cumene cracking reaction as a function of Si/Al ratios. Systematic variation of acidity and activity was observed as a function of Si/Al ratio. The initial heats of NH₃ adsorption correlated well with activity indicate that acid sites with ΔH > 100 kJ/mole is responsible for cumene cracking activity. Linear correlations were obtained with total acidity and cumene cracking activities. The tetrahedral aluminum was found to be responsible for the observed acidities and catalytic activities.     

Utilizing Radiant Nanoparticles in Silicon for Balanced White Color Adapters

Silicon - This work fully depends on the silicon nanoparticles. It is represented as SiNPs. This depends on the transparent LEDs color converters. The spectrum obtained is fully white, so it is...     

Improvement of constructive heuristics using variable neighbourhood descent for scheduling a flow shop with sequence dependent setup time

This paper deals with the problem of scheduling a flow shop operating in a sequence dependent setup time environment. The objective is to determine the sequence that minimises the makespan. Two efficient neighbourhood search-based heuristics have been developed and tested using 960 problems, and the results obtained reveal their usefulness. The algorithms make use of two existing constructive heuristics. A neighbourhood search known as variable neighbourhood descent is used to improve the two constructive heuristics. Experimentation is carried out on the 96 groups of problems with 10 problem instances in each group. Performance analysis is carried out using the relative performance improvement of each heuristic. The analysis shows a consistently better performance of the neighbourhood-based improvement heuristics. A paired comparison test is used for validating the superiority of the proposed heuristics. The statistical analysis reveals that the performance of the neighbourhood-based heuristics is very much dependent on the initial constructive heuristics used.     

Organometallic L-Alanine Cadmium Iodide Crystals for Optical Device Fabrication

Single crystals of L-alanine cadmium iodide (LACI) were grown by the slow evaporation technique at room temperature. A single-crystal X-ray diffraction (SXRD) model was used to evaluate the crystal structure of the as-grown LACI crystal. The energy dispersive X-ray (EDX) analysis and ultraviolet-visible-near infrared (UV-vis-NIR) transmittance studies were carried out, and the results reveal the presence of elements in the title compound. From the transmittance data, the optical bandgap as a function of photon energy was estimated, and the different optical constants were calculated. A fluorescence study was performed for the LACI crystal. Thermogravimetric and differential thermal analyses have also been studied to investigate the thermal property of the LACI crystal. The efficiency of the second harmonic generation (SHG) of the title crystal was investigated. The magnetic and electrical properties were estimated by the vibrating sample magnetometer (VSM) analysis and impedance study, respectively.     

Experimental study on conventional solar still integrated with inclined solar still under different water depth

This study primarily focuses on comparative experimental analysis on standalone conventional solar still (CSS), inclined solar still (ISS), and integrated conventional and inclined solar still (CSS‐ISS) for different parameters that affect the freshwater yield. For enhancing the freshwater yield only a few studies are available on still‐still integration. The present novel study provides a greater improvement in improving the freshwater yield by integrating ISS with CSS. This experimental work mainly concentrates on the importance of water depth (d _w) and mass flow rate of water ( m _w) in the solar still. Water depth inside the conventional still varied from 0.02 to 0.06 m whereas, water is constantly flown with a mass flow rate of 8.33 kg/hour in an ISS with baffles. The experimental result shows that the accumulated freshwater yield from CSS‐ISS, ISS, and CSS were 6.2, 5.04, and 4.24 kg, respectively. CSS‐ISS and ISS produced 46.23% and 18.87% higher productivity than the CSS. From the experimental investigation, it is also identified that the water temperature is significantly improved by 20% using integration as compared with CSS without integration under the same water depth of d _w = 0.02 m. The overall improvement in yield was higher in the case of CSS‐ISS. The deviations between experimental and theoretical values of yield from the conventional and modified solar still were in the range of ±7%.     

Modelling the combined effect of surface roughness and topography on bacterial attachment

Bacterial attachment is a complex process affected by flow conditions,imparted stresses,and the sur-face properties and structure of both the supporting material and the cell.Experiments on the initial attachment of cells of the bacterium Streptococcus gordonii (S.gordonii),an important early coloniser of dental plaque,to samples of stainless steel (SS) have been reported in this work.The primary aim motivating this study was to establish what affect,if any,the surface roughness and topology of sam-ples of SS would have on the initial attachment of cells of the bacterium S.gordonii.This material and bacterium were chosen by virtue of their relevance to dental implants and dental implant infections.Prior to bacterial attachment,surfaces become conditioned by the interfacing environment (salivary pellicle from the oral cavity for instance).For this reason,cell attachment to samples of SS pre-coated with saliva was also studied.By implementing the Extended Derjaguin Landau Verwey and Overbeek(XDLVO) theory coupled with convection-diffusion-reaction equations and the surface roughness infor-mation,a computational model was developed to help better understand the physics of cell adhesion.Surface roughness was modelled by reconstructing the surface topography using statistical parame-ters derived from atomic force microscopy (AFM) measurements.Using this computational model,the effects of roughness and surface patterns on bacterial attachment were examined quantitatively in both static and flowing fluid environments.The results have shown that rougher surfaces (within the sub-microscale) generally increase bacterial attachment in static fluid conditions which quantitatively agrees with experimental measurements.Under flow conditions,computational fluid dynamics (CFD) simula-tions predicted reduced convection-diffusion inside the channel which would act to decrease bacterial attachment.When combined with surface roughness effects,the computational model also predicted that the surface topographies discussed within this work produced a slight decrease in overall bacterial attachment.This would suggest that the attachment-preventing effects of surface patterns dominate over the adhesion-favourable sub-microscale surface roughness;hence,producing a net reduction in adhered cells.This qualitatively agreed with experimental observations reported here and quantitatively matched experimental observations for low flow rates within measurement error.     

The Association between Gut Microbiota and Osteoarthritis: Does the Disease Begin in the Gut?

Some say that all diseases begin in the gut. Interestingly, this concept is actually quite old, since it is attributed to the Ancient Greek physician Hippocrates, who proposed the hypothesis nearly 2500 years ago. The continuous breakthroughs in modern medicine have transformed our classic understanding of the gastrointestinal tract (GIT) and human health. Although the gut microbiota (GMB) has proven to be a core component of human health under standard metabolic conditions, there is now also a strong link connecting the composition and function of the GMB to the development of numerous diseases, especially the ones of musculoskeletal nature. The symbiotic microbes that reside in the gastrointestinal tract are very sensitive to biochemical stimuli and may respond in many different ways depending on the nature of these biological signals. Certain variables such as nutrition and physical modulation can either enhance or disrupt the equilibrium between the various species of gut microbes. In fact, fat-rich diets can cause dysbiosis, which decreases the number of protective bacteria and compromises the integrity of the epithelial barrier in the GIT. Overgrowth of pathogenic microbes then release higher quantities of toxic metabolites into the circulatory system, especially the pro-inflammatory cytokines detected in osteoarthritis (OA), thereby promoting inflammation and the initiation of many disease processes throughout the body. Although many studies link OA with GMB perturbations, further research is still needed.     

A comparison of stress intensity factors obtained through crack closure integral and other approaches using eXtended element-free Galerkin method

In this paper, a new approach for extracting stress intensity factors (SIFs) by the extended element-free Galerkin method, through a crack closure integral (CCI) scheme, is proposed. The CCI calculation is used in conjunction with a local smoothing technique to improve the accuracy of the computed SIFs in a number of case studies of linear elastic fracture mechanics. The cases involve problems of mixed-mode, curved crack and thermo-mechanical loading. The SIFs by CCI, displacement and stress methods are compared with those based on the M-integral technique reported in the literature. The proposed CCI method involves very simple relations, and still gives good accuracy. The convergence of the results is also examined.     

Fullerenes as Photocatalysts: Studies on Decomposition of Water and Oxalic Acid

The paper presents data on the photocatalytic decomposition of water and destruction of oxalic acid using the fullerene mixture as a photocatalyst. Based on the data obtained, mechanisms are proposed for the destruction of oxalic acid and splitting of water.