The impacts of a GTL plant on Brazil's oil products supply and refinery expansion

This paper assesses the impacts of a GTL plant on the expansion of Brazil's oil refining segment. The GTL plant (50,000 bpd) was sized to start up operations in 2015, producing diesel and naphtha through the indirect route (FT-synthesis). This plant will consume the non-associated natural gas production from the recent discoveries at the Santos Basin (around 419 Bm³), and the associated gas production from the Campos Basin. Both basins are located in the Southeast of Brazil, the most populated, rich and industrialized region of the country. Two different criteria for refinery expansion were simulated in order to meet oil product demand scenarios. Findings show that depending on the refinery expansion criteria considered GTL will play a fundamental hole to meet the oil product demand forecast to Brazil in the next 10 years.     

Dynamic vulcanisation of EPDM/PE-based thermoplastic vulcanisates studied along the extruder axis

Simple blending and dynamic vulcanisation of EPDM/PE blends using the resol/SnCl₂ system was studied in an extruder using a series of sampling devices. The melting of the PE pellets occurs just in front of and in the first kneading zone. Upon complete melting of the PE phase, the EPDM/PE blends reach very quickly their final morphology. Crosslinking of the EPDM phase to high levels occurs already when the PE phase is not yet fully molten. The higher the EPDM content, the higher the viscous dissipation, the higher the melt temperature and, consequently, the higher the crosslinking rate. For the EPDM/PE (50/50; w/w) TPV a transition from continuous via co-continuous to fully dispersed EPDM is observed, which is driven by crosslinking. Although the degree of crosslinking of the EPDM rubber is very high, this does not prevent phase inversion of the blend. The EPDM/PE interface is rather blurred, because PE crystalline lamellae are growing into the EPDM domains, probably because of the high compatibility between PE and EPDM (60 wt% of ethene). This study shows that dynamic vulcanisation in extruders proceeds quite differently from that in batch kneaders, where melting, mixing and crosslinking are separated in time. In extruders mass and heat transport, melting of the thermoplastic, morphology development (including dispersion and phase inversion), distribution and dissolution of (crosslinking) chemicals and crosslinking of the rubber do not occur as independent phenomena, but mutually and/or continuously interact.     

Inference, inquiry, evidence censorship, and explanation inconnectionist expert systems

The combination of the techniques of expert systems and neural networks has the potential of producing more powerful systems, for example, expert systems able to learn from experience. In this paper, we address the combinatorial neural model (CNM), a kind of fuzzy neural network able to accommodate in a simple framework the highly desirable property of incremental learning, as well as the usual capabilities of expert systems. We show how an interval-based representation for membership grades makes CNM capable of reasoning with several types of uncertainty: vagueness, ignorance, and relevance commonly found in practical applications. In addition, we show how basic functions of expert systems such as inference, inquiry, censorship of input information, and explanation may be implemented. We also report experimental results of the application of CNM to the problem of deforestation monitoring of the Amazon region using satellite images     

An expert system with temporal reasoning for alarm processing inpower system control centers

The alarm lists presented to control center operators are usually difficult to interpret. The authors present an expert system that processes the alarm lists in Portuguese control centers. This system makes an intelligent synthesis of the available information and presents it in a flexible and structured way. It uses an original approach to deal with temporal reasoning and real-time constraints. The system incorporates an explanation module that enables its use as a tutor for novice operators     

The antimicrobial effect of wine on Listeria innocua in a model stomach system

A model stomach, containing a food matrix and a synthetic gastric fluid, was used to study the bactericidal effect of ingested wine on Listeria innocua. Volumes of wine equivalent to the ingestion of one glass and half a bottle, led, over a period of less than 2 h, to a reduction of 3 and 4 logarithmic cycles of the initial population respectively. The influence of ethanol and organic acids, wine constituents with known antimicrobial properties, was investigated. Ethanol exhibited a higher bactericidal effect than the mixture of the main wine organic acids. When testing the organic acids separately, malic and lactic acids were found to have the strongest effect. The combination of ethanol with the organic acids acted synergistically but to a lesser extent than wine itself. The results suggest that the ingestion of wine during a meal may diminish the quantity of Listeria persisting further in the alimentary tract.     

Infrared and ultraviolet–visible spectroscopic studies of silica, [(Cp)2ZrCl2] and trimethylaluminum interactions

Infrared and UV–vis studies of metallocene immobilization on silica are reported here. The results have indicated changes in the Zr coordination sphere of metallocene depending on the immobilization route used. The reaction of [(Cp)₂ZrCl₂] with silica formed [(Cp)₂ZrCl]⁺[SiO]⁻ species. The same metallocene, reacting with TMA modified silica, formed monomethylated and dimethylated species by the substitution of chloro for methyl ligands, stabilized on the surface by interaction with “MAO-like” species (methylaluminoxane, MAO). These monomethylated and dimethylated cationic zirconium species are the active centers for the polymerization reaction. Different order of TMA addition in the silica modification step generated surface species of a similar nature, differing in their relative quantities. The highest amount of these active species was obtained when the support was added to the TMA solution rather than adding the TMA solution to the silica support. This was the most significant parameter affecting catalytic activity in ethylene polymerization.     

Multiple Testing Correction in Medical Image Analysis

We present a novel method for correcting the significance level of hypothesis testing that requires multiple comparisons. It is based on the spectral graph theory, in which the variables are seen as the vertices of a complete undirected graph and the correlation matrix as the adjacency matrix that weights its edges. The method increases the statistical power of the analysis by refuting the assumption of independence among variables, while keeping the probability of false positives low. By computing the eigenvalues of the correlation matrix, it is possible to obtain valuable information about the dependence levels among the variables of the problem, so that the effective number of independent variables can be estimated. The method is compared to other available models and its effectiveness illustrated in case studies involving high-dimensional sets of variables.     

Influence of ethylene‐co‐vinyl acetate copolymers on the flow properties of wax synthetic systems

Wax crystallization can cause serious damage to petroleum flow because as the viscosity increases, there is organic deposition in the pipe lines, which causes oil production reduction. Ethylene–vinyl acetate copolymers (EVA) are used as an alternative to prevent such problems. The influence of EVA copolymers on the properties of wax synthetic systems, composed of a solvent mixture and paraffin and petroleum asphalt residue (PAR), was evaluated in this work. The performance of EVA as a wax inhibitor depends on the molecular weight and vinyl acetate content of the copolymer and on the presence of the asphalt fraction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1337–1348, 2002     

The risk of seroconversion in surgeons of the hepatitis B, hepatitis C and human immunodeficiency viruses (in a specific surgical population)

The prevalence of hepatitis B surface antigen (HBs Ag) and antibody to hepatitis C virus (HCV) and human immunodeficiency virus (HIV) was determined in the serum specimens of 288 patients treated surgically in the orthopaedic department of an urban public teaching hospital. The cumulative risk of HBV, HCV and HIV seroconversion for an orthopaedic surgeon during the surgical career span was calculated. We found that 1.4%, 3.1% and 1.7% of patients were seropositive for HBsAg, HCV antibody and HIV antibody, respectively. Seropositivity was neither associated with age nor with trauma, whereas male patients had a greater likelihood of seropositivity. Risk factor assessment did not prove to be discriminating in identifying which patients may pose a potential exposure risk. This study supports the concept of universal infection control precautions for orthopaedic surgeons regardless of the patients' risk factor or serologic status.     

Involvement of regional lymph nodes after penetration of Schistosoma mansoni cercariae in naive and infected mice

The very low density lipoprotein receptor (VLDL-r) is a cell-surface molecule specialized for the internalization of multiple diverse ligands, including apolipoprotein E (apoE)-containing lipoprotein particles, via clathrin-coated pits. Its structure is similar to the low-density lipoprotein receptor (LDL-r), although the two have substantially different systemic distributions and regulatory pathways. The present work examines the distribution of VLDL-r in the central nervous system (CNS) and in relation to senile plaques in Alzheimer disease (AD). VLDL-r is present on resting and activated microglia, particularly those associated with senile plaques (SPs). VLDL-r immunoreactivity is also found in cortical neurons. Two exons of VLDL-r mRNA are differentially spliced in the mature receptor mRNA. One set of splice forms gives rise to receptors containing (or lacking) an extracellular O-linked glycosylation domain near the transmembrane portion of the molecule. The other set of splice forms appears to be brain-specific, and is responsible for the presence or absence of one of the cysteine-rich repeat regions in the binding region of the molecule. Ratios of the receptor variants generated from these splice forms do not differ substantially across different cortical areas or in AD. We hypothesize that VLDL-r might contribute to metabolism of apoE and apoE/A beta complexes in the brain. Further characterizations of apoE receptors in Alzheimer brain may help lay the groundwork for understanding the role of apoE in the CNS and in the pathophysiology of AD.